The information about the maximum number of MAE counters is
crucial to the counter support in the driver.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The information about the number of pushed Rx buffers is required
for counter Rx queue to know when to give credits to counter
stream.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
User will be able to associate counter with MAE action set to
collect counter packets and bytes for a specific action set.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The MCDIs will be used to control counter Rx queue packet flow.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
User will be able to create and free MAE counters. Support for
associating counters with action set will be added in upcoming
patches.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
MAE delivers counters data as special packets via dedicated Rx queue.
Reserve an RxQ so that it does not interfere with ethdev Rx queues.
A routine will be added later to handle these packets.
There is no point to reserve the queue if no service cores are
available and counters cannot be used.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The driver requires service cores for housekeeping. Share these
cores for many adapters and various purposes to avoid extra CPU
overhead.
Since housekeeping services will talk to NIC, it should be possible
to choose logical core on matching NUMA node.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Add extra EFX flags to RxQ info initialization API to support
choosing different RxQ types and make the API public to use
it in for counter queues.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add a function returning management event queue software index.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add a flag to request support for user mark field on an RxQ.
The field is required to retrieve generation count value from
counter RxQ.
Implement it only for Riverhead and EF10 ESSB since they support
the field in the Rx prefix.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Add a flag to request support for ingress m-port on an RxQ.
Implement it only for Riverhead, other families will return an error
if the flag is set.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Make software index of a Tx queue and ethdev index separate.
When an ethdev TxQ is accessed in ethdev callbacks, an explicit ethdev
queue index is used.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Interrupts support has assumptions on interrupt numbers used
for LSC and Rx queues. The first interrupt is used for LSC,
subsequent interrupts are used for Rx queues.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Custom mapping is actually supported for EF10 and EF100 families only.
A driver (e.g. DPDK PMD) may require to customize mapping of EvQ
to interrupts if, for example, extra EvQ are used for house-keeping
in polling or wake up (via another EvQ) mode.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Target EvQ and IRQ number are specified in the same location
in MCDI request. The value is treated as IRQ number if the
event queue is interrupting (corresponding flag is set) and
as target event queue otherwise.
However it is better to separate it on helper API level to
make it more clear.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
rxq_intr flag requests support for interrupt mode for ethdev Rx queues.
There is no internal Rx queues yet.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Make software index of an Rx queue and ethdev index separate.
When an ethdev RxQ is accessed in ethdev callbacks, an explicit ethdev
queue index is used.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
This patch fixes the following build failures seen on Ubuntu 16.04
with gcc 5.4.0 because of uninitialized variables:
...
examples/pipeline/cli.c:1559:11: error: 'weight_val' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:1545:13: error: 'member_id_val' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:1538:12: error: 'group_id_val' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:2189:2: error: 'idx1' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:2179:43: error: 'idx0' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:2265:2: error: 'idx1' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:2248:43: error: 'idx0' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:2358:2: error: 'idx1' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
...
examples/pipeline/cli.c:2325:43: error: 'idx0' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
Fixes: 598fe0dd0d ("examples/pipeline: support selector table")
Signed-off-by: Ali Alnubani <alialnu@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add Rx event vector fastpath to convert HW defined metadata into
rte_mbuf and rte_event_vector.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add event vector support for cnxk event Rx adapter, add control path
APIs to get vector limits and ability to configure event vectorization
on a given Rx queue.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for event eth Tx adapter fastpath operations.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for event eth Rx adapter fastpath operations.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for event eth Rx adapter.
Resize cn10k workslot fastpath structure to fit in 64B cacheline size.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In IAVF node TM capability querying, the unit of bandwidth is Kbps,
which is not correct according to TM specification. Change the unit to
Byte per second. Refine some unclear comments as well.
Fixes: 44d0a720a5 ("net/iavf: query QoS capabilities and set queue TC mapping")
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add MPLS training packet and offsets.
Add check to identify MPLS ethertype filters.
For example:
testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 \
type is 0x8847 / end actions queue index 2 / end
This flow will result in all the matched ingress packets be
forwarded to queue 2.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
FDIR can't work when SPI as inputset for both ESP over IP and ESP
over UDP flow. This patch fixes this issue by adding the corresponding
input set for ESP over IP and ESP over UDP when parsing input set. Also,
it adds input set bit for NAT_T_ESP to distinguish ESP over IP and ESP
over UDP.
Fixes: 70feafc1a3 ("net/ice: support ESP/NATT flow director to match outer IP")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Segmentation fault mentioned in below commit is related to
other root cause under investigation.
This reverts patch below since it may have potential
risk and side effect if the first profile mask is set to 0.
Fixes: 148fdf2d35 ("net/ice/base: fix first profile mask")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Simply replace the SMP barrier with atomic thread fence for
i40e hw ring scan, if there is no synchronization point.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds default RSS support for IPv4 and IPv6 fragment packet.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support AVF RSS for inner most header of GTPoGRE packet. It supports
RSS based on inner most IP src + dst address and TCP/UDP src + dst
port.
Signed-off-by: Lingyu Liu <lingyu.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Update cfa_resource_types.h to add a new entry for compatibility with FW.
Signed-off-by: Shuanglin Wang <shuanglin.wang@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
As part of the workaround put in the commit "219842b9990c",
driver caches the last read stats values from the hardware.
But this is not cleared during the clear stats operation. This
results in showing up stale stats values while reading the stats
after the clear operation.
Fixes: 219842b999 ("net/bnxt: workaround spurious zero stats in Thor")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
FW has been modified to send a new async event when it detects
a pause storm. Register for this new event and log it upon receipt.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Store the async event completion data1 and data2 in separate variables
at the start of the function before the switch case for the different
events so they can be used by any of the event handlers.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This enables device firmware to respond appropriately to BMC queries
about the driver's configured MTU.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
- HWRM version updated to 1.10.2.44
- Added corresponding driver changes for the Admin MTU field name change.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Bnxt PMD registers LSC callback (bond_ethdev_lsc_event_callback) when
working at bond mode. This callback will dead lock when LSC
interrupt triggered.
lsc interrupt ->
bnxt_handle_async_event ->
bnxt_link_update_op ->
bond_ethdev_lsc_event_callback (lsc_lock) ->
bnxt_link_update_op ->
bond_ethdev_lsc_event_callback (lsc_lock dead lock)
Fixes: c2faa1d196 ("net/bnxt: add support for LSC interrupt event")
Cc: stable@dpdk.org
Signed-off-by: Weifeng Li <liweifeng96@126.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Ensure that Rx/Tx/Async completion entry fields are accessed
only after the completion's valid flag has been loaded and
verified. This is needed for correct operation on systems that
use relaxed memory consistency models.
Fixes: 2eb53b134a ("net/bnxt: add initial Rx code")
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Add support for rte_flow_item_raw to parse custom L2 and L3
protocols.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add roc API for parsing custom L2 and L3 protocols.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Set link status to down and don't fetch link status from kernel
when device in stopped state.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Until hierarchy committed TM hardware resources are not allocated
for node.
This patch check for status of HW resources before reading statistics.
Fixes: 1e25d57fae ("net/octeontx2: add TM stats and shaper profile")
Cc: stable@dpdk.org
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Set link status to down and don't fetch link status from kernel
when device in stopped state.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Preallocation of MCAM entries is not valid anymore since the
AF side MCAM allocation scheme has changed. This patch disables
preallocation by changing the default MCAM preallocation size
from 8 to 1.
Fixes: 168c59cfe4 ("net/octeontx2: add flow MCAM utility functions")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In the inline inound path, a custom header would be present at L3 which
has sequence number & SPI. L2 need to be adjusted such that the eventual
packet would have L3 after L2. Remove assumption of L2 type in this
handling.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
vlan_strip and vlan_extend features need to return "unsupported"
error value.
Fixes: ff0b8b10dc ("net/mvpp2: support VLAN offload")
Cc: stable@dpdk.org
Signed-off-by: Meir Levi <mlevi4@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
