Traffic manager provides an API for resuming
an arbitrary node in a hierarchy.
This commit adds support for calling this API
from testpmd.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Traffic manager provides an API for suspending
an arbitrary node in a hierarchy.
This commit adds support for calling this API from testpmd.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
EAL option -m is supported in FreeBSD,
so move it under supported heading from non
supported heading.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
New version of the packages with dependencies for the szedata2
driver is needed due to the new API of the libsze2 library which
is used in the driver.
The documentation and the release notes are updated to contain
the information about the required versions.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Acked-by: Jan Remes <remes@netcope.com>
Library folder name and output library name are same except a few flaws
including librte_ether.
This library is network device abstraction layer, the name "ethdev" fits
better than "ether", and library & header files already named as ethdev.
Also there is a rte_ether.h in the net library which can cause confusion.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add device argument to customize Rx descriptor wait timeout which
is supported in DPDK firmware variant only in equal stride super-buffer
Rx mode only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
DPDK firmware variant supports equal stride super-buffer Rx mode which
provides higher packet rate and packet marks but requires dedicated
mempool manager with contiguous object block allocation (e.g. bucket).
Also the firmware supports subvariant without checksumming on Tx which
allows to reach higher packet rates on transmit if checksumming is not
required.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
HW Rx descriptor represents many contiguous packet buffers which
follow each other. Number of buffers, stride and maximum DMA
length are setup-time configurable per Rx queue based on provided
mempool. The mempool must support contiguous block allocation and
get info API to retrieve number of objects in the block.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Add rte_flow_action_count action data structure to enable shared
counters across multiple flows on a single port or across multiple
flows on multiple ports within the same switch domain. Also this enables
multiple count actions to be specified in a single flow action.
This patch also modifies the existing rte_flow_query API to take the
rte_flow_action structure as an input parameter instead of the
rte_flow_action_type enumeration to allow querying a specific action
from a flow rule when multiple actions of the same type are specified.
This patch also contains updates for the bonding, failsafe and mlx5 PMDs
and testpmd application which are affected by this API change.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Introduces a new action type RTE_FLOW_ITEM_TYPE_MARK which enables
flow patterns to specify arbitrary integer values to match aginst
set by the RTE_FLOW_ACTION_TYPE_MARK action in previously matched
flows.
Add support for specification of new MARK flow item in testpmd's cli.
Update testpmd documentation to describe new MARK flow item support.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add jump action type which defines an action which allows a matched
flow to be redirect to the specified group. This allows physical and
logical flow table/group hierarchies to be defined through rte_flow.
This breaks ABI compatibility for the following public functions (as it
modifes the ordering of the rte_flow_action_type enumeration):
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Add support for specification of new JUMP action to testpmd's flow
cli, and update the testpmd documentation to describe this new
action.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add new flow action types and associated action data structures to
support the encapsulation and decapsulation of VXLAN and NVGRE tunnel
endpoints.
The RTE_FLOW_ACTION_TYPE_[VXLAN/NVGRE]_ENCAP action will cause the
matching flow to be encapsulated in the tunnel endpoint overlay
defined in the [vxlan/nvgre]_encap action data.
The RTE_FLOW_ACTION_TYPE_[VXLAN/NVGRE]_DECAP action will cause all
headers associated with the outer most tunnel endpoint of the specified
type for the matching flows.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add support for virtual function representor ports to the ixgbe PF
driver. When SR-IOV virtual functions devices are enabled a
corresponding representor port for each VF can be enabled in the
process in which the ixgbe PMD is running within, by specifying the
representor devargs with the list of VF ports that representors
are to be created for.
An example of the devargs which would create VF representor for virtual
functions 0,2,4,5,6 and 7 is:
-w DBDF,representor=[0,2,4-7]
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for virtual function representor ports to the i40e PF
driver. When SR-IOV virtual functions devices are enabled a
corresponding representor port for each VF can be enabled, in the
process in which the i40e PMD is running, by specifying the
representor devargs with the list of VF ports that representors
are to be created for.
An example of the devargs which would create VF representor for virtual
functions 0,2,4,5,6 and 7 is:
-w DBDF,representor=[0,2,4-7]
and to just specify a single representor on virtual function 3 (switch
port id):
-w DBDF,representor=3
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Introduces a new structure, rte_eth_devargs, to support generic
ethdev arguments common across NET PMDs, with a new API
rte_eth_devargs_parse API to support PMD parsing these arguments. The
patch add support for a representor argument passed with passed with
the EAL -w option. The representor parameter allows the user to specify
which representor ports to initialise on a device.
The argument supports passing a single representor port, a list of
port values or a range of port values.
-w BDF,representor=1 # create representor port 1 on pci device BDF
-w BDF,representor=[1,2,5,6,10] # create representor ports in list
-w BDF,representor=[0-31] # create representor ports in range
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Introduces a new port attribute to ethdev port's which denotes the
switch domain a port belongs to. By default all port's switch
identifiers are set to RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID. Ports
which supported the concept of switch domains can be configured with
the same switch domain id.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add document to describe the model for representing switching capable
devices in DPDK, using a general ethdev port model and through port
representors. This document also details the port model and the
rte_flow semantics required for flow programming, as well as listing
some example use cases.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Marko Kovacevic <marko.kovacevic@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch support L3 VXLAN, no inner L2 header comparing to standard
VXLAN protocol. L3 VXLAN using specific overlay UDP destination port to
discriminate against standard VXLAN, device parameter and FW has to be
configured to support it:
sudo mlxconfig -d <device> -y s IP_OVER_VXLAN_EN=1
sudo mlxconfig -d <device> -y s IP_OVER_VXLAN_PORT=<port>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Add support for the following OpenFlow-defined actions:
- RTE_FLOW_ACTION_OF_POP_VLAN: pop the outer VLAN tag.
- RTE_FLOW_ACTION_OF_PUSH_VLAN: push a new VLAN tag.
- RTE_FLOW_ACTION_OF_SET_VLAN_VID: set the 802.1q VLAN id.
- RTE_FLOW_ACTION_OF_SET_VLAN_PCP: set the 802.1q priority.
- RTE_FLOW_ACTION_OF_POP_MPLS: pop the outer MPLS tag.
- RTE_FLOW_ACTION_OF_PUSH_MPLS: push a new MPLS tag.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add VXLAN-GPE support to csum forwarding engine and rte flow.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
VXLAN-GPE enables VXLAN for all protocols. Protocol link:
https://www.ietf.org/id/draft-ietf-nvo3-vxlan-gpe-05.txt
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
RTE_FLOW_ACTION_TYPE_PORT_ID brings the ability to inject matching traffic
into a different device, as identified by its DPDK port ID.
This is normally only supported when the target port ID has some kind of
relationship with the port ID the flow rule is created against, such as
being exposed by a common physical device (e.g. a different port of an
Ethernet switch).
The converse pattern item, RTE_FLOW_ITEM_TYPE_PORT_ID, makes the resulting
flow rule match traffic whose origin is the specified port ID. Note that
specifying a port ID that differs from the one the flow rule is created
against is normally meaningless (if even accepted), but can make sense if
combined with the transfer attribute.
These must not be confused with their PHY_PORT counterparts, which refer to
physical ports using device-specific indices, but unlike PORT_ID are not
necessarily tied to DPDK port IDs.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds the missing action counterpart to the PHY_PORT pattern
item, that is, the ability to directly inject matching traffic into a
physical port of the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
While RTE_FLOW_ITEM_TYPE_PORT refers to physical ports of the underlying
device using specific identifiers, these are often confused with DPDK port
IDs exposed to applications in the global name space.
Since this pattern item is seldom used, rename it RTE_FLOW_ITEM_PHY_PORT
for better clarity.
No ABI impact.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Contrary to all other pattern items, these are inconsistently documented as
affecting traffic instead of simply matching its origin, without provision
for the latter.
This commit clarifies documentation and updates PMDs since the original
behavior now has to be explicitly requested using the new transfer
attribute.
It breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_validate()
Impacted PMDs are bnxt and i40e, for which the VF pattern item is now only
supported when a transfer attribute is also present.
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This new attribute enables applications to create flow rules that do not
simply match traffic whose origin is specified in the pattern (e.g. some
non-default physical port or VF), but actively affect it by applying the
flow rule at the lowest possible level in the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
VLAN TCI is a 16-bit field broken down as PCP (3b), DEI (1b) and VID (12b).
The default mask used by PMDs for the VLAN pattern when one isn't provided
by the application comprises the entire TCI, which is problematic because
most devices only support VID matching.
This forces applications to always provide a mask limited to the VID part
in order to successfully apply a flow rule with a VLAN pattern item.
Moreover, applications rarely want to match PCP and DEI intentionally.
Given the above and since VID is what is commonly referred to when talking
about VLAN, this commit excludes PCP and DEI from the default mask.
Fixes: 6de5c0f130 ("ethdev: define default item masks in flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
TPID handling in rte_flow VLAN and E_TAG pattern item definitions is not
consistent with the normal stacking order of pattern items, which is
confusing to applications.
Problem is that when followed by one of these layers, the EtherType field
of the preceding layer keeps its "inner" definition, and the "outer" TPID
is provided by the subsequent layer, the reverse of how a packet looks like
on the wire:
Wire: [ ETH TPID = A | VLAN EtherType = B | B DATA ]
rte_flow: [ ETH EtherType = B | VLAN TPID = A | B DATA ]
Worse, when QinQ is involved, the stacking order of VLAN layers is
unspecified. It is unclear whether it should be reversed (innermost to
outermost) as well given TPID applies to the previous layer:
Wire: [ ETH TPID = A | VLAN TPID = B | VLAN EtherType = C | C DATA ]
rte_flow 1: [ ETH EtherType = C | VLAN TPID = B | VLAN TPID = A | C DATA ]
rte_flow 2: [ ETH EtherType = C | VLAN TPID = A | VLAN TPID = B | C DATA ]
While specifying EtherType/TPID is hopefully rarely necessary, the stacking
order in case of QinQ and the lack of documentation remain an issue.
This patch replaces TPID in the VLAN pattern item with an inner
EtherType/TPID as is usually done everywhere else (e.g. struct vlan_hdr),
clarifies documentation and updates all relevant code.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Summary of changes for PMDs that implement ETH, VLAN or E_TAG pattern
items:
- bnxt: EtherType matching is supported with and without VLAN, but TPID
matching is not and triggers an error.
- e1000: EtherType matching is only supported with the ETHERTYPE filter,
which does not support VLAN matching, therefore no impact.
- enic: same as bnxt.
- i40e: same as bnxt with existing FDIR limitations on allowed EtherType
values. The remaining filter types (VXLAN, NVGRE, QINQ) do not support
EtherType matching.
- ixgbe: same as e1000, with additional minor change to rely on the new
E-Tag macro definition.
- mlx4: EtherType/TPID matching is not supported, no impact.
- mlx5: same as bnxt.
- mvpp2: same as bnxt.
- sfc: same as bnxt.
- tap: same as bnxt.
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS hash types (ETH_RSS_* macros defined in rte_ethdev.h) describe the
protocol header fields of a packet that must be taken into account while
computing RSS.
When facing encapsulated (e.g. tunneled) packets, there is an ambiguity as
to whether these should apply to inner or outer packets. Applications need
the ability to tell exactly "where" RSS must be performed.
This is addressed by adding encapsulation level information to the RSS flow
action. Its default value is 0 and stands for the usual unspecified
behavior. Other values provide a specific encapsulation level.
Contrary to the change announced by commit 676b605182 ("doc: announce
ethdev API change for RSS configuration"), this patch does not affect
struct rte_eth_rss_conf but struct rte_flow_action_rss as the former is not
used anymore by the RSS flow action. ABI impact is therefore limited to
rte_flow.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
By definition, RSS involves some kind of hash algorithm, usually Toeplitz.
Until now it could not be modified on a flow rule basis and PMDs had to
always assume RTE_ETH_HASH_FUNCTION_DEFAULT, which remains the default
behavior when unspecified (0).
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since its inception, the rte_flow RSS action has been relying in part on
external struct rte_eth_rss_conf for compatibility with the legacy RSS API.
This structure lacks parameters such as the hash algorithm to use, and more
recently, a method to tell which layer RSS should be performed on [1].
Given struct rte_eth_rss_conf will never be flexible enough to represent a
complete RSS configuration (e.g. RETA table), this patch supersedes it by
extending the rte_flow RSS action directly.
A subsequent patch will add a field to use a non-default RSS hash
algorithm. To that end, a field named "types" replaces the field formerly
known as "rss_hf" and standing for "RSS hash functions" as it was
confusing. Actual RSS hash function types are defined by enum
rte_eth_hash_function.
This patch updates all PMDs and example applications accordingly.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
[1] commit 676b605182 ("doc: announce ethdev API change for RSS
configuration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch replaces C99-style flexible arrays in struct rte_flow_action_rss
and struct rte_flow_item_raw with standard pointers to the same data.
They proved difficult to use in the field (e.g. no possibility of static
initialization) and unsuitable for C++ applications.
Affected PMDs and examples are updated accordingly.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch makes the following changes to flow rule actions:
- List order now matters, they are redefined as performed first to last
instead of "all simultaneously".
- Repeated actions are now supported (e.g. specifying QUEUE multiple times
now duplicates traffic among them). Previously only the last action of
any given kind was taken into account.
- No more distinction between terminating/non-terminating/meta actions.
Flow rules themselves are now defined as always terminating unless a
PASSTHRU action is specified.
These changes alter the behavior of flow rules in corner cases in order to
prepare the flow API for actions that modify traffic contents or properties
(e.g. encapsulation, compression) and for which order matter when combined.
Previously one would have to do so through multiple flow rules by combining
PASSTRHU with priority levels, however this proved overly complex to
implement at the PMD level, hence this simpler approach.
This breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_validate()
PMDs with rte_flow support are modified accordingly:
- bnxt: no change, implementation already forbids multiple actions and does
not support PASSTHRU.
- e1000: no change, same as bnxt.
- enic: modified to forbid redundant actions, no support for default drop.
- failsafe: no change needed.
- i40e: no change, implementation already forbids multiple actions.
- ixgbe: same as i40e.
- mlx4: modified to forbid multiple fate-deciding actions and drop when
unspecified.
- mlx5: same as mlx4, with other redundant actions also forbidden.
- sfc: same as mlx4.
- tap: implementation already complies with the new behavior except for
the default pass-through modified as a default drop.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Upcoming changes in relation to the handling of actions list will make the
DUP action redundant as specifying several QUEUE actions will achieve the
same behavior. Besides, no PMD implements this action.
By removing an entry from enum rte_flow_action_type, this patch breaks ABI
compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This section has become less relevant since the flow API (rte_flow) is now
a mature DPDK API with applications developed directly on top of it instead
of an afterthought.
This patch removes it for the following reasons:
- It has never been updated to track the latest changes in the legacy
filter types and never will.
- Many provided examples are theoretical and misleading since PMDs do not
implement them. Others are obvious.
- Upcoming work on the flow API will alter the behavior of several pattern
items, actions and in some cases, flow rules, which will in turn cause
existing examples to be wrong.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Although pattern items and actions examples end with "and so on", these
lists include all existing definitions and as a result are updated almost
every time new types are added. This is cumbersome and pointless.
This patch also synchronizes Doxygen and external API documentation wording
with a slight clarification regarding meta pattern items.
No fundamental API change.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
These enable more precise reporting of objects responsible for errors.
This breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_destroy()
- rte_flow_error_set()
- rte_flow_flush()
- rte_flow_isolate()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add new callbacks for eth_dev_ops of i40e to get the information
and data of plugin module eeprom.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add new callbacks for eth_dev_ops of e1000 to get the information and
data of plugin module EEPROM.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add new callbacks for eth_dev_ops of ixgbe to get the information
and data of plugin module eeprom.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add a new command "module-eeprom" to get the data of plugin
module EEPROM.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
