This patch updates Mellanox maintainers mails from
the Mellanox domain to Nvidia domain.
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Removed the documentation maintainers.
The documentation is now, currently, unmaintained.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
There is new link_speed value introduced. It's INT_MAX value which
means that speed is unknown. To simplify processing of the value
in application, new function is added which convert link_speed to
string. Also dpdk examples have many duplicated code which format
entire link status structure to text.
This commit adds two functions:
* rte_eth_link_speed_to_str - format link_speed to string
* rte_eth_link_to_str - convert link status structure to string
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Co-work with Jeff, setting me as new maintainer for igb, igc and ixgbe.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The BPF lib was introduced in 18.05.
There were no changes in its public API since 19.11.
It should be mature enough to remove its 'experimental' tag.
RTE_BPF_XTYPE_NUM is also being dropped from rte_bpf_xtype to
avoid possible ABI problems in the future.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Make is not supported for compiling DPDK, the config files are no
longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Make is no longer supported for compiling DPDK, scripts used with make
are no longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The git trees dpdk-next-qos and dpdk-next-pipeline were created
to share the load of patches merging.
It has been decided in the Technical Board that the load is not big
enough to justify keeping these repositories.
The patches for ethdev TM and MTR will be managed in dpdk-next-net.
The sched and meter libraries will be managed in the main tree.
The packet framework will be managed in the main tree as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Chenbo has done an excellent job in reviewing,
contributing and testing patches.
This patch adds him as co-maintainer for Vhost, Virtio
and vDPA components.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
The script checkpatch.pl (used in checkpatches.sh) can use a dictionary
from the codespell project to check spelling.
There are multiple dictionaries to be used.
The script build-dict.sh concatenate multiple dictionaries and remove
some annoying false positives.
The dictionary built by this script must be saved in a file which
is referenced with the environment variable DPDK_CHECKPATCH_CODESPELL.
The easiest is to export this variable in ~/.config/dpdk/devel.config.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Following the new RegEx class.
There is a need to create a dedicated test application in order to
validate this class and PMD.
Unlike net device this application loads data from a file.
This commit introduces the new RegEx test app.
The basic app flow:
1. Configure the RegEx device to use one queue, and set the rule
database, using precompiled file.
2. Allocate mbufs based on the requested number of jobs, each job will
i get one mbuf.
3. Enqueue as much as possible jobs.
4. Dequeue jobs.
5. if the number of dequeue jobs < requested number of jobs job to step
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
This commit introduce the RegEx poll mode drivers class, and
adds Mellanox RegEx PMD.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
Setting Martin Spinler as new and only maintainer for Netcope
libsze2/nfb drivers
Signed-off-by: Jakub Neruda <neruda@netcope.com>
Acked-by: Martin Spinler <spinler@cesnet.cz>
DPDK allows calling some part of its API from a non-EAL thread but this
has some limitations.
OVS (and other applications) has its own thread management but still
want to avoid such limitations by hacking RTE_PER_LCORE(_lcore_id) and
faking EAL threads potentially unknown of some DPDK component.
Introduce a new API to register non-EAL thread and associate them to a
free lcore with a new NON_EAL role.
This role denotes lcores that do not run DPDK mainloop and as such
prevents use of rte_eal_wait_lcore() and consorts.
Multiprocess is not supported as the need for cohabitation with this new
feature is unclear at the moment.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The experimental tags were removed, but the comment
is still having API classification as EXPERIMENTAL
Fixes: 931cc531aa ("rawdev: remove experimental tag")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
As RegEx usage become more used by DPDK applications, for example:
* Next Generation Firewalls (NGFW)
* Deep Packet and Flow Inspection (DPI)
* Intrusion Prevention Systems (IPS)
* DDoS Mitigation
* Network Monitoring
* Data Loss Prevention (DLP)
* Smart NICs
* Grammar based content processing
* URL, spam and adware filtering
* Advanced auditing and policing of user/application security policies
* Financial data mining - parsing of streamed financial feeds
* Application recognition.
* Dmemory introspection.
* Natural Language Processing (NLP)
* Sentiment Analysis.
* Big data database acceleration.
* Computational storage.
Number of PMD providers started to work on HW implementation,
along side with SW implementations.
This lib adds the support for those kind of devices.
The RegEx Device API is composed of two parts:
- The application-oriented RegEx API that includes functions to setup
a RegEx device (configure it, setup its queue pairs and start it),
update the rule database and so on.
- The driver-oriented RegEx API that exports a function allowing
a RegEx poll Mode Driver (PMD) to simultaneously register itself as
a RegEx device driver.
RegEx device components and definitions:
+-----------------+
| |
| o---------+ rte_regexdev_[en|de]queue_burst()
| PCRE based o------+ | |
| RegEx pattern | | | +--------+ |
| matching engine o------+--+--o | | +------+
| | | | | queue |<==o===>|Core 0|
| o----+ | | | pair 0 | | |
| | | | | +--------+ +------+
+-----------------+ | | |
^ | | | +--------+
| | | | | | +------+
| | +--+--o queue |<======>|Core 1|
Rule|Database | | | pair 1 | | |
+------+----------+ | | +--------+ +------+
| Group 0 | | |
| +-------------+ | | | +--------+ +------+
| | Rules 0..n | | | | | | |Core 2|
| +-------------+ | | +--o queue |<======>| |
| Group 1 | | | pair 2 | +------+
| +-------------+ | | +--------+
| | Rules 0..n | | |
| +-------------+ | | +--------+
| Group 2 | | | | +------+
| +-------------+ | | | queue |<======>|Core n|
| | Rules 0..n | | +-------o pair n | | |
| +-------------+ | +--------+ +------+
| Group n |
| +-------------+ |<-------rte_regexdev_rule_db_update()
| | | |<-------rte_regexdev_rule_db_compile_activate()
| | Rules 0..n | |<-------rte_regexdev_rule_db_import()
| +-------------+ |------->rte_regexdev_rule_db_export()
+-----------------+
RegEx: A regular expression is a concise and flexible means for matching
strings of text, such as particular characters, words, or patterns of
characters. A common abbreviation for this is â~@~\RegExâ~@~].
RegEx device: A hardware or software-based implementation of RegEx
device API for PCRE based pattern matching syntax and semantics.
PCRE RegEx syntax and semantics specification:
http://regexkit.sourceforge.net/Documentation/pcre/pcrepattern.html
RegEx queue pair: Each RegEx device should have one or more queue pair to
transmit a burst of pattern matching request and receive a burst of
receive the pattern matching response. The pattern matching
request/response embedded in *rte_regex_ops* structure.
Rule: A pattern matching rule expressed in PCRE RegEx syntax along with
Match ID and Group ID to identify the rule upon the match.
Rule database: The RegEx device accepts regular expressions and converts
them into a compiled rule database that can then be used to scan data.
Compilation allows the device to analyze the given pattern(s) and
pre-determine how to scan for these patterns in an optimized fashion that
would be far too expensive to compute at run-time. A rule database
contains a set of rules that compiled in device specific binary form.
Match ID or Rule ID: A unique identifier provided at the time of rule
creation for the application to identify the rule upon match.
Group ID: Group of rules can be grouped under one group ID to enable
rule isolation and effective pattern matching. A unique group identifier
provided at the time of rule creation for the application to identify
the rule upon match.
Scan: A pattern matching request through *enqueue* API.
It may possible that a given RegEx device may not support all the
features
of PCRE. The application may probe unsupported features through
struct rte_regexdev_info::pcre_unsup_flags
By default, all the functions of the RegEx Device API exported by a PMD
are lock-free functions which assume to not be invoked in parallel on
different logical cores to work on the same target object. For instance,
the dequeue function of a PMD cannot be invoked in parallel on two logical
cores to operates on same RegEx queue pair. Of course, this function
can be invoked in parallel by different logical core on different queue
pair. It is the responsibility of the upper level application to
enforce this rule.
In all functions of the RegEx API, the RegEx device is
designated by an integer >= 0 named the device identifier *dev_id*
At the RegEx driver level, RegEx devices are represented by a generic
data structure of type *rte_regexdev*.
RegEx devices are dynamically registered during the PCI/SoC device
probing phase performed at EAL initialization time.
When a RegEx device is being probed, a *rte_regexdev* structure and
a new device identifier are allocated for that device. Then, the
regexdev_init() function supplied by the RegEx driver matching the
probed device is invoked to properly initialize the device.
The role of the device init function consists of resetting the hardware
or software RegEx driver implementations.
If the device init operation is successful, the correspondence between
the device identifier assigned to the new device and its associated
*rte_regexdev* structure is effectively registered.
Otherwise, both the *rte_regexdev* structure and the device identifier
are freed.
The functions exported by the application RegEx API to setup a device
designated by its device identifier must be invoked in the following
order:
- rte_regexdev_configure()
- rte_regexdev_queue_pair_setup()
- rte_regexdev_start()
Then, the application can invoke, in any order, the functions
exported by the RegEx API to enqueue pattern matching job, dequeue
pattern matching response, get the stats, update the rule database,
get/set device attributes and so on
If the application wants to change the configuration (i.e. call
rte_regexdev_configure() or rte_regexdev_queue_pair_setup()), it must
call rte_regexdev_stop() first to stop the device and then do the
reconfiguration before calling rte_regexdev_start() again. The enqueue and
dequeue functions should not be invoked when the device is stopped.
Finally, an application can close a RegEx device by invoking the
rte_regexdev_close() function.
Each function of the application RegEx API invokes a specific function
of the PMD that controls the target device designated by its device
identifier.
For this purpose, all device-specific functions of a RegEx driver are
supplied through a set of pointers contained in a generic structure of
type *regexdev_ops*.
The address of the *regexdev_ops* structure is stored in the
*rte_regexdev* structure by the device init function of the RegEx driver,
which is invoked during the PCI/SoC device probing phase, as explained
earlier.
In other words, each function of the RegEx API simply retrieves the
*rte_regexdev* structure associated with the device identifier and
performs an indirect invocation of the corresponding driver function
supplied in the *regexdev_ops* structure of the *rte_regexdev*
structure.
For performance reasons, the address of the fast-path functions of the
RegEx driver is not contained in the *regexdev_ops* structure.
Instead, they are directly stored at the beginning of the *rte_regexdev*
structure to avoid an extra indirect memory access during their
invocation.
RTE RegEx device drivers do not use interrupts for enqueue or dequeue
operation. Instead, RegEx drivers export Poll-Mode enqueue and dequeue
functions to applications.
The *enqueue* operation submits a burst of RegEx pattern matching
request to the RegEx device and the *dequeue* operation gets a burst of
pattern matching response for the ones submitted through *enqueue*
operation.
Typical application utilisation of the RegEx device API will follow the
following programming flow.
- rte_regexdev_configure()
- rte_regexdev_queue_pair_setup()
- rte_regexdev_rule_db_update() Needs to invoke if precompiled rule
database not
provided in rte_regexdev_config::rule_db for rte_regexdev_configure()
and/or application needs to update rule database.
- rte_regexdev_rule_db_compile_activate() Needs to invoke if
rte_regexdev_rule_db_update function was used.
- Create or reuse exiting mempool for *rte_regex_ops* objects.
- rte_regexdev_start()
- rte_regexdev_enqueue_burst()
- rte_regexdev_dequeue_burst()
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
Rather than checking the binutils version number, which can lead to
unnecessary disabling of AVX512 if fixes have been backported to distro
versions, we can instead check the output of "as" from binutils to see if
it is correct.
The check in the script uses the minimal assembly reproduction code posted
to the public bug tracker for gcc/binutils for those issues [1]. If the
binutils bug is present, the instruction parameters - specifically the
displacement parameter - will be different in the disassembled output
compared to the input. Therefore the check involves assembling a single
instruction and disassembling it again, checking that the two match.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90028
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Ahead of changes to rework the file, move the pkg-config file generation to
a new directory under buildtools. This allows the meson code to be
separated out from the main meson.build for simplicity, and also allows any
additional scripts for working with the pkg-config files to be placed there
too.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
I will leave Intel soon and likely won't have dedicated time for
maintainership, so removing my name from all related maintainer roles.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
The MinGW build for Windows has special cases where exported
function contain additional prefix:
__emutls_v.per_lcore__*
To avoid adding those prefixed functions to the version.map file
the map_to_def.py script was modified to create a map file for MinGW
with the needed changed.
The file name was changed to map_to_win.py and lib/meson.build map output
was unified with drivers/meson.build output
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Add test cases for setting bit, clearing bit, testing
and setting bit, testing and clearing bit operation.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Bitwise operation APIs are defined and used in a lot of PMDs,
which caused a huge code duplication. To reduce duplication,
this patch consolidates them into a common API family.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Basic memory management supports core libraries and PMDs operating in
IOVA as PA mode. It uses a kernel-mode driver, virt2phys, to obtain
IOVAs of hugepages allocated from user-mode. Multi-process mode is not
implemented and is forcefully disabled at startup. Assign myself as a
maintainer for Windows file and memory management implementation.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Add hugepages discovery ("large pages" in Windows terminology)
and update documentation for required privilege setup. Only 2MB
hugepages are supported and their number is estimated roughly
due to the lack or unstable status of suitable OS APIs.
Assign myself as maintainer for the implementation file.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Code in Linux EAL that supports dynamic memory allocation (as opposed to
static allocation used by FreeBSD) is not OS-dependent and can be reused
by Windows EAL. Move such code to a file compiled only for the OS that
require it. Keep Anatoly Burakov maintainer of extracted code.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Introduce OS-independent wrappers in order to support common EAL code
on Unix and Windows:
* eal_file_open: open or create a file.
* eal_file_lock: lock or unlock an open file.
* eal_file_truncate: enforce a given size for an open file.
Implementation for Linux and FreeBSD is placed in "unix" subdirectory,
which is intended for common code between the two. These thin wrappers
require no special maintenance.
Common code supporting multi-process doesn't use the new wrappers,
because it is inherently Unix-specific and would impose excessive
requirements on the wrappers.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Adding Xavier as additional maintainer to bonding.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Chas Williams <chas3@att.com>
Since we've moved away from our initial validate-abi.sh script,
in favor of check-abi.sh, which uses libabigail,
remove the old script from the tree, and update the docs accordingly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add new test-case to measure performance of
IPsec data-path functions.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds a python script that can be used with the new telemetry
socket. It connects as a client to the socket, and allows the user send
a command and see the JSON response.
The example usage below shows the script connecting to the new telemetry
socket, and sending three default telemetry commands entered by the user.
The response for each command is shown below the user input.
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 20.05.0-rc0", "pid": 32794, "max_output_len": 16384}
--> /
{"/": ["/", "/help", "/info"]}
--> /info
{"/info": {"version": "DPDK 20.05.0-rc0", "pid": 32794, \
"max_output_len": 16384}}
--> /help,/info
{"/help": {"/info": "Returns DPDK Telemetry information. \
Takes no parameters"}}
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The functions added in this patch will make it easier for telemetry
to convert data to correct JSON responses to telemetry requests.
Tests are also added for these json utility functions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Adding programmer's guide for Graph library and the inbuilt nodes.
This patch also updates the release note for the new libraries.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add graph based l3fwd application skeleton with cmdline
parsing support inline with normal l3fwd.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add log infra for node specific logging.
Also, add null rte_node that just ignores all the objects
directed to it.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Adding the unit test to test the functionality of node and graph APIs.
Testing includes registering a node, cloning a node, creating a graph,
perform graph walk, collecting stats and all node and graph debug APIs.
example command to test:
echo "graph_autotest" | sudo ./build/app/test/dpdk-test -c 0x30
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Graph architecture abstracts the data processing functions as
"node" and "link" them together to create a complex "graph" to enable
reusable/modular data processing functions.
These APIs enables graph framework operations such as create, lookup,
dump and destroy on graph and node operations such as clone,
edge update, and edge shrink, etc. The API also allows creating the
stats cluster to monitor per graph and per node stats.
This patch defines the public API for graph support.
This patch also adds support for the build infrastructure and
update the MAINTAINERS file for the graph subsystem.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Change references to ABI 20.0.1 to use ABI v21, see
https://doc.dpdk.org/guides/contributing/abi_policy.html#general-guidelines
"Major ABI versions are declared no more frequently than yearly.
Compatibility with the major ABI version is mandatory in subsequent
releases until a new major ABI version is declared."
Combined ABI policy and versioning in maintainers, add map files to the
filter to more closely monitor future ABI changes.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
