When Rx/Tx functions are updated such as in a rte flow
rule creation with VLAN stripping or marking action,
update the fastpath ops table as well.
Fixes: b951c2efcb15 ("net/cnxk: add Rx burst for CN9K")
Fixes: f742a9a66813 ("net/cnxk: add Rx burst for CN10K")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
If multi-segment is enabled and single segment/packet
is received, then mbuf data_len is not updated in
cn9k_nix_cqe_to_mbuf() function.
Also, in case of timestamp is enabled, mbuf data_len
and pkt_len will be updated for all packets including
multi segmented packets.
Fixes: 7c6bee34064f ("net/cnxk: enable PTP processing in vector Rx")
Cc: stable@dpdk.org
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Improve vWQE and CQ Rx performance by tuning perfetches to 64B
cacheline size.
Also, prefetch the vWQE array offsets at cacheline boundaries.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Store and reuse workslot status for TT, GRP and HEAD status
instead of reading from GWC as reading from GWC imposes
additional latency.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Multiple PMDs have dummy/noop Rx/Tx packet burst functions.
These dummy functions are very simple, introduce a common function in
the ethdev and update drivers to use it instead of each driver having
its own functions.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Tx command is prepared based on offloads enabled and stored in
Tx queue structure at tx_queue_setup phase.
In fastpath the command is copied from Tx queue to LMT line for
all the packets.
Since, the command contents are mostly constants we can move the
command preparation to fastpath and avoid accessing Tx queue
memory.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add cn10k segregated Rx and event Tx enqueue template functions,
these help in parallelizing the build.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add cn10k segregated Rx and event dequeue functions to build,
add macros to make future modifications simpler.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add cn10k segregated Rx and event dequeue template functions,
these help in parallelizing the build.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add cn9k segregated Tx and event Tx functions to build,
add macros to make future modifications simpler.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add cn9k segregated Rx and event Tx enqueue template functions,
these help in parallelizing the build.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add cn9k segregated Rx and event dequeue functions to build,
add macros to make future modifications simpler.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Split template functions to multiple files based on the range
of offloads. This allows them to be built in parallel reducing
time spent on compiling single files containing all the template
functions.
The files are added to the build system in later patches modifying
the existing scheme of selecting template lookup with a simple
flat array based lookup.
Add cn9k segregated Rx and event dequeue template functions,
these help in parallelizing the build.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Synchronize inline session create and destroy using spinlock.
Also move security related error prints outside the spinlock.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Improve inbound inline error handling for CN9K in terms of
packet delivered to application for different kinds of errors.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Adding changes to configure switch header type pre_l2 for cnxk.
pre_l2 headers are custom headers placed before the ethernet
header. Along with switch header type, user needs to provide the
offset within the custom header that holds the size of the
custom header and mask for the size within the size offset.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Satheesh Paul <psatheesh@marvell.com>
Patch updates configured meter BPF (Bandwidth profile) ID is in
receive queue context during meter creation.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Provides ethdev callback support of rx_queue_count,
rx_descriptor_status and tx_descriptor_status.
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When multicast promiscuous was being enabled it caused the unicast
promiscuous to be disabled. This fix resolves this by setting
NIX_RX_MODE_PROMISC when eth_dev->data->promiscuous is set, regardless.
Fixes: 325d79c00a5a ("net/cnxk: support all multicast")
Cc: stable@dpdk.org
Signed-off-by: Asaf Ravid <aravid@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds support to configure channel mask which will
be used by rte flow when adding flow rules on SDP interfaces.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As per the deprecation notice, In the view of enabling unified driver
for octeontx2(cn9k)/octeontx3(cn10k), removing drivers/octeontx2
drivers and replace with drivers/cnxk/ which
supports both octeontx2(cn9k) and octeontx3(cn10k) SoCs.
This patch does the following
- Replace drivers/common/octeontx2/ with drivers/common/cnxk/
- Replace drivers/mempool/octeontx2/ with drivers/mempool/cnxk/
- Replace drivers/net/octeontx2/ with drivers/net/cnxk/
- Replace drivers/event/octeontx2/ with drivers/event/cnxk/
- Replace drivers/crypto/octeontx2/ with drivers/crypto/cnxk/
- Rename config/arm/arm64_octeontx2_linux_gcc as
config/arm/arm64_cn9k_linux_gcc
- Update the documentation and MAINTAINERS to reflect the same.
- Change the reference to OCTEONTX2 as OCTEON 9. Old release notes and
the kernel related documentation is not accounted for this change.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Bandwidth profile count is updated in meter capabilities during device
initialization using mbox interface.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Disable drop_re i.e dropping packets with receive errors on
vector enable for few cn10k revisions due to HW errata.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Allow flow control on LBK VF's and enable TM to listen on
backpressure when Rx pause is enabled.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds support to write CPT CTX through microcode op(SET_CTX/WRITE_SA)
for cn10k inline mode.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Enable TM topology to listen on backpressure received when
Rx pause frame is enabled. Only one TM node in Tl3/TL2 per
channel can listen on backpressure on that channel.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP capability bit is zero,
the specified behavior is the same as it had been before
this bit was introduced. Explicitly reset it in all PMDs
supporting rte_flow API in order to attract the attention
of maintainers, who should eventually choose to advertise
the new capability or not. It is already known that
mlx4 and mlx5 will not support this capability.
For RTE_ETH_DEV_CAPA_FLOW_SHARED_OBJECT_KEEP
similar action is not performed,
because no PMD except mlx5 supports indirect actions.
Any PMD that starts doing so will anyway have to consider
all relevant API, including this capability.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
This patch adds support for rte flow action type port_id to
enable directing packets from an input port PF to an output
port which is a VF of the input port PF.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
CNF10KA does not differ it terms of RVU resources from
CN10KA platform hence add it to list of devices respective
drivers support.
Otherwise devices on CNF10KA are not probed even though
compatible drivers exist.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Meters are configured per flow using rte_flow_create API.
Patch adds support for destroy operation for meter action
applied on the flow.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Meters are configured per flow using rte_flow_create API.
Implement support for meter action applied on the flow.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to read and update stats corresponding to
given meter instance for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to update DSCP table for pre-coloring for
incoming packet per nixlf for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to enable or disable meter instance for
CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to delete meter instance for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to create meter instance for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to delete meter policy for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to add meter policy for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to validate meter policy for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to delete meter profile for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to add meter profile for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement ethdev operation to get meter capabilities for
CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
To enable support for ingress meter, supported operations
are exposed for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
