This patch adds the NXP dpaa2 architecture and pmd details
in the Network interfaces section.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
DPAA2 Hardware Mempool handlers allow enqueue/dequeue from NXP's
QBMAN hardware block.
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS is set to 'dpaa2', if the pool
is enabled.
This memory pool currently supports packet mbuf type blocks only.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Enable Arkville on supported configurations
Add overview documentation
Minimum driver support for valid compile
Arkville PMD is not supported on ARM or PowerPC at this time
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Signed-off-by: John Miller <john.miller@atomicrules.com>
These tests are not suited for the rte_bus PCI implementation anymore.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The name of company is listed for other drivers.
Use the company name also for szedata2 driver.
Cards are available from Netcope rather than Cesnet.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Remove DPDK QAT sample app, in favour of the newer applications
that use the cryptodev library: ipsec-gw and l2fwd-crypto,
which has support for Intel QuickAssist devices.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Pascal has added many features to the Tap PMD and the code
is now mostly his code. We talked and he suggested I send
the patch to change ownership.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
This patch provides a set of tests for verifying the functional
correctness of 16-bit and 32-bit CRC APIs.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
APIs for selecting the architecure specific implementation and computing
the crc (16-bit and 32-bit CRCs) are added. For CRCs calculation, scalar
as well as x86 intrinsic(sse4.2) versions are implemented.
The scalar version is based on generic Look-Up Table(LUT) algorithm,
while x86 intrinsic version uses carry-less multiplication for
fast CRC computation.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add a library designed to calculate latency statistics and report them
to the application when queried. The library measures minimum, average and
maximum latencies, and jitter in nano seconds. The current implementation
supports global latency stats, i.e. per application stats.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds a library that calculates peak and average data-rate
statistics. For ethernet devices. These statistics are reported using
the metrics library.
Signed-off-by: Remy Horton <remy.horton@intel.com>
This patch adds a new information metrics library. This Metrics
library implements a mechanism by which producers can publish
numeric information for later querying by consumers. Metrics
themselves are statistics that are not generated by PMDs, and
hence are not reported via ethdev extended statistics.
Metric information is populated using a push model, where
producers update the values contained within the metric
library by calling an update function on the relevant metrics.
Consumers receive metric information by querying the central
metric data, which is held in shared memory.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add a section for the eventdev PMDs, and note the next-tree.
Claim maintainership of the software eventdev PMD.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds basic unit tests for the eventdev API.
commands to run the test app:
./build/app/test -c 2
RTE>>eventdev_common_autotest
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The skeleton driver facilitates, bootstrapping the new
eventdev driver and creates a platform to verify
the northbound eventdev common code.
The driver supports both VDEV and PCI based eventdev
devices.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In a polling model, lcores poll ethdev ports and associated
rx queues directly to look for packet. In an event driven model,
by contrast, lcores call the scheduler that selects packets for
them based on programmer-specified criteria. Eventdev library
adds support for event driven programming model, which offer
applications automatic multicore scaling, dynamic load balancing,
pipelining, packet ingress order maintenance and
synchronization services to simplify application packet processing.
By introducing event driven programming model, DPDK can support
both polling and event driven programming models for packet processing,
and applications are free to choose whatever model
(or combination of the two) that best suits their needs.
This patch adds the eventdev specification header file.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Updates the documentation and feature lists for the AVP PMD device.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
This commit introduces the AVP PMD file structure without adding any actual
driver functionality. Functional blocks will be added in later patches.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
This patch enables i40e driver in PowerPC along with its altivec
intrinsic support.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Add KNI PMD which wraps librte_kni for ease of use.
KNI PMD can be used as any regular PMD to send / receive packets to the
Linux networking stack.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Yong Wang <yongwang@vmware.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Wang <yongwang@vmware.com>
This commit adds the basic infrastructure for the cfgfile library unit
tests. It includes success path tests for the most commonly used APIs.
More unit tests will be added later.
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Moved from lib/librte_mempool, stack mempool handler is an independent
driver.
Shared builds would now require to link in librte_mempool_stack for
"stack" mempool handler.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Moved from lib/librte_mempool, ring mempool is now an independent
driver.
Shared builds would now need to add librte_mempool_ring for:
* ring_mp_mc
* ring_sp_sc
* ring_sp_mc
* ring_mp_sc
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
I have been a little too busy these past months and could not really
do any real maintainer stuff for dpdk for a while now.
I have no clear idea when I could dedicate more time to dpdk.
So the best thing for the dpdk community would be to move the eal
maintenance to more involved people.
Signed-off-by: David Marchand <david.marchand@6wind.com>
This is to logically group unit tests into their own folder,
separating them from "app" folder.
Hopefully this will make the unit test in DPDK more visible.
Following binaries moved to "test" folder:
cmdline-test
test-acl
test-pipeline
test <-- various DPDK unit tests
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The directory scripts does not exist anymore.
The files have been moved but some paths were not updated
in the maintainers list.
Fixes: 9a98f50e89 ("scripts: move to devtools")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add myself as co-maintainer for vhost/virtio drivers
and vhost-user library.
Suggested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Huawei has left DPDK team for months, and he hasn't showed up since
then. Remove him.
Cc: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add documentation to describe using the new performance test application.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
This patchset introduce new application which allows measuring
performance parameters of PMDs available in crypto tree. The goal of
this application is to replace existing performance tests in app/test.
Parameters available are: throughput (--ptest throughput) and latency
(--ptest latency). User can use multiply cores to run tests on but only
one type of crypto PMD can be measured during single application
execution. Cipher parameters, type of device, type of operation and
chain mode have to be specified in the command line as application
parameters. These parameters are checked using device capabilities
structure.
Couple of new library functions in librte_cryptodev are introduced for
application use.
To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set
(it is set by default).
Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 --
--ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth
--cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo
sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12
--total-ops 10000000 --burst-sz 32 --buffer-sz 64
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Adds the description of the cryptodev scheduler PMD overview,
limitations, build, instructions, modes, etc.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds APIs and function prototypes for the scheduler PMD to perform extra
operations other than standard cryptodev APIs.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
To avoid confusion with distributor app, this commit
renames the flow-distributor sample app to server_node_efd,
since it shows how to use the EFD library and it is based
on a server/nodes model.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add documentation about the driver and update
release notes.
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch introduces crypto poll mode driver
using ARMv8 cryptographic extensions.
CPU compatibility with this driver is detected in
run-time and virtual crypto device will not be
created if CPU doesn't provide:
AES, SHA1, SHA2 and NEON.
This PMD is optimized to provide performance boost
for chained crypto operations processing,
such as encryption + HMAC generation,
decryption + HMAC validation. In particular,
cipher only or hash only operations are
not provided.
The driver currently supports AES-128-CBC
in combination with: SHA256 HMAC and SHA1 HMAC
and relies on the external armv8_crypto library:
https://github.com/caviumnetworks/armv8_crypto
Build ARMv8 crypto PMD if compiling for ARM64
and CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO option
is enable in the configuration file.
ARMV8_CRYPTO_LIB_PATH environment variable will
point to the appropriate library directory.
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Sameh Gobriel <sameh.gobriel@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
This new sample app, based on the client/server sample app,
shows the user an scenario using the EFD library.
It consists of:
- A front-end server which has an EFD table that stores the
node id for each flow key, which will distribute the incoming
packets to the different nodes
- A back-end node, which has a hash table where node checks,
after reading packets coming from the server, whether the packet
is meant to be used in such node, in which case it will be TXed,
or not, in which case, packet will be dropped.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
