Add virtual PMD which communicates with COMBO cards through sze2
layer using libsze2 library.
Since link_speed is uint16_t, there can not be used number for 100G
speed, therefore link_speed is set to ETH_LINK_SPEED_10G until the
type of link_speed is solved.
Signed-off-by: Matej Vido <matejvido@gmail.com>
Increase max_rx_pktlen to accommodate jumbo frame size. Perform sanity
checks and enable jumbo mode in rx queue setup. Set link mtu based on
max_rx_pktlen.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
The RX_OLFLAGS option was renamed from DISABLE to ENABLE in driver code
and linux config.
It is now renamed also in bsd config and documentation.
Fixes: 359f106a69 ("ixgbe: prefer enabling olflags rather than not disabling")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
librte_pmd_mlx4.so needs to be linked with libibverbs otherwise, the PMD is
not able to open Mellanox devices and the following message is printed by
testpmd at startup
"librte_pmd_mlx4: cannot access device, is mlx4_ib loaded?".
Applications dependency on libibverbs are moved to be only valid in static
mode, in shared mode, applications do not depend on it anymore,
librte_pmd_mlx4.so keeps this dependency and thus is linked with libibverbs.
MLX4 cannot be supported in combined shared library because there is no clean
way of adding -libverbs to the combined library.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC config option is not really
necessary, as bulk alloc rx function can be used anyway, as long as the
necessary conditions are satisfied, which are checked already
in the library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Update cxgbe documentation to include support for FreeBSD:
1. Add instructions on how to compile CXGBE PMD in FreeBSD.
2. Add instructions on how to flash firmware image on Chelsio T5 cards in
FreeBSD.
3. Add sample application usage for FreeBSD.
4. Add an extra step to reload kernel module in Linux in order for the new
firmware to be loaded.
5. Typo fixes.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fix spelling and grammar errors. Re-organize sections for better explanation
in the documentation. Add a section describing compilation of CXGBE with DPDK.
Add a note describing that CXGBE currently only supports binding to PF4.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Update cxgbe documentation with the following:
1. Add instructions on how to flash firmware and config file on Chelsio T5
devices.
2. Add a list of supported devices.
3. Add instructions on how to enable and disable flow control via testpmd.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Adds cxgbe poll mode driver documentation under the usual doc/guides/nics/
directory with the rest of the drivers. The documentation covers cxgbe
implementation details, features and limitations, prerequisites,
configuration, and a sample application usage.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This change adds automatic figure references to the docs. The
figure numbers in the generated Html and PDF docs are now
automatically numbered based on section.
Requires Sphinx >= 1.3.1.
The patch makes the following changes.
* Changes image:: tag to figure:: and moves image caption
to the figure.
* Adds captions to figures that didn't previously have any.
* Un-templates the |image-name| substitution definitions
into explicit figure:: tags. They weren't used more
than once anyway and Sphinx doesn't support them
for figure.
* Adds a target to each image that didn't previously
have one so that they can be cross-referenced.
* Renamed existing image target to match the image
name for consistency.
* Replaces the Figures lists with automatic :numref:
:ref: entries to generate automatic numbering
and captions.
* Replaces "Figure" references with automatic :numref:
references.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
CONFIG_RTE_MBUF_SCATTER_GATHER was renamed into CONFIG_RTE_MBUF_REFCNT
by commit 62814bc2e9 and removed by commit 4769bc5a27.
Some traces remain because of delayed patches.
It can also be removed from doxygen config.
It is now poisoned in rte_mbuf.h to warn any misuse.
Fixes: d0dff9ba44 ("doc: sample application user guide")
Fixes: fc1f2750a3 ("doc: programmers guide")
Fixes: 4769bc5a27 ("mbuf: remove build option to disable refcnt")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
- libmlx4 and libibverbs dependencies distributed with Mellanox OFED are now
also available on DPDK.org to make installation easier.
- Document Mellanox OFED and firmware versions to use.
- Add links to Mellanox and its community websites.
- Add kernel modules parameters section.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Create nics guide by moving chapters about Intel and Mellanox NICs.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
