Start a new release cycle with empty release notes.
The ABI version becomes 23.0.
The map files are updated to the new ABI major number (23).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Special handling of removed drivers is also dropped in check-abi.sh and
a note has been added in libabigail.abignore as a reminder.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Enable printing of the outer VLAN if flags indicate it is present.
Cc: stable@dpdk.org
Signed-off-by: Ben Magistro <koncept1@gmail.com>
Reviewed-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Hardware IP reassembly may be incomplete for multiple reasons like
reassembly timeout reached, duplicate fragments, etc.
To save application cycles to process these packets again, a new
mbuf dynflag is added to show that the mbuf received is not
reassembled properly.
Now if this dynflag is set, application can retrieve corresponding
chain of mbufs using mbuf dynfield set by the PMD. Now, it will be
up to application to either drop those fragments or wait for more time.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
The dump of dynamic fields and flags fails if the shm is already
allocated. Add a check to fix the issue.
Fixes: d4902ed31c ("mbuf: check shared memory before dumping dynamic space")
Cc: stable@dpdk.org
Signed-off-by: Alexander Bechikov <asb.tyum@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In rte_pktmbuf_mtod_offset macro, there is a casting from char * to type
't', which may cause cast-align warning when using strict cast align
flag with supporting gcc:
gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0
CFLAGS="-Wcast-align=strict" make V=1 -C examples/l2fwd clean static
main.c: In function 'l2fwd_mac_updating':
/dpdk/build/include/rte_mbuf_core.h:719:3: warning: cast increases
required alignment of target type [-Wcast-align]
719 | ((t)((char *)(m)->buf_addr + (m)->data_off + (o)))
| ^
/dpdk/build/include/rte_mbuf_core.h:733:32: note: in expansion of macro
'rte_pktmbuf_mtod_offset'
733 | #define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
| ^~~~~~~~~~~~~~~~~~~~~~~
As the code assumes correct alignment, add first a (void *) casting, to
avoid the warning.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Eli Britstein <elibr@nvidia.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
The flags PKT_TX_VLAN_PKT and PKT_TX_QINQ_PKT are
marked as deprecated since commit 380a7aab1a ("mbuf: rename deprecated
VLAN flags") (2017). But they were not using the RTE_DEPRECATED
macro, because it did not exist at this time. Add it, and replace
usage of these flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The flags PKT_RX_L4_CKSUM_BAD and PKT_RX_IP_CKSUM_BAD are defined
twice with the same value. Remove one of the occurrence, which was
marked as "deprecated".
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
m->nb_seg must be reset on mbuf free whatever the value of m->next,
because it can happen that m->nb_seg is != 1. For instance in this
case:
m1 = rte_pktmbuf_alloc(mp);
rte_pktmbuf_append(m1, 500);
m2 = rte_pktmbuf_alloc(mp);
rte_pktmbuf_append(m2, 500);
rte_pktmbuf_chain(m1, m2);
m0 = rte_pktmbuf_alloc(mp);
rte_pktmbuf_append(m0, 500);
rte_pktmbuf_chain(m0, m1);
As rte_pktmbuf_chain() does not reset nb_seg in the initial m1
segment (this is not required), after this code the mbuf chain
have 3 segments:
- m0: next=m1, nb_seg=3
- m1: next=m2, nb_seg=2
- m2: next=NULL, nb_seg=1
Then split this chain between m1 and m2, it would result in 2 packets:
- first packet
- m0: next=m1, nb_seg=2
- m1: next=NULL, nb_seg=2
- second packet
- m2: next=NULL, nb_seg=1
Freeing the first packet will not restore nb_seg=1 in the second
segment. This is an issue because it is expected that mbufs stored
in pool have their nb_seg field set to 1.
Fixes: 8f094a9ac5 ("mbuf: set mbuf fields while in pool")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
Add ESP tunnel type to the tunnel types list that can be specified
for TSO or checksum on the inner part of tunnel packets.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
As stated in the API, dynamic field and flags should be created with no
additional flag (simply in the API for future changes).
Fix the dynamic flag register helper which was not enforcing it and add
unit tests.
Fixes: 4958ca3a44 ("mbuf: support dynamic fields and flags")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Removed offload flag PKT_RX_EIP_CKSUM_BAD. PKT_RX_OUTER_IP_CKSUM_BAD
should be used as a replacement.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This function should be made stable now.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This one has been in for required time period.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
These functions to register dynamic fields were added in 19.11
and should be promoted to stable.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
These two functions were added in 19.11 as experimental.
Time to promote the to stable status.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Those accessors have been introduced more than two years ago
(rte_mbuf_to_priv in v18.08, rte_mbuf_*_addr* in v19.02).
Time to mark them stable.
rte_mbuf_to_baddr() could be removed, but since we lack a deprecation
notice, keep it as a simple wrapper.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Not all net PMD's/HW can parse packet and identify L2 header and
L3 header locations on Tx. This is inline with other Tx offloads
requirements such as L3 checksum, L4 checksum offload, etc,
where mbuf.l2_len, mbuf.l3_len etc, needs to be set for HW to be
able to generate checksum. Since Inline IPsec is also such a Tx
offload, some PMD's at least need mbuf.l2_len to be valid to
find L3 header and perform Outbound IPSec processing.
Hence, this patch updates documentation to enforce setting
mbuf.l2_len while setting PKT_TX_SEC_OFFLOAD in mbuf.ol_flags
for Inline IPsec Crypto / Protocol offload processing to
work on Tx.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Clarify that the mempool private initializer and object initializer used
for packet pools require that the mempool private size is large enough.
Also add an assert (only enabled when -DRTE_ENABLE_ASSERT is passed) to
check this constraint.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Because mbuf dyn shared memory was allocated runtime, so it's
necessary to check validity when dump mbuf dyn info.
Also this patch adds an error logging when init shared memory fail.
Fixes: 4958ca3a44 ("mbuf: support dynamic fields and flags")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Running "./devtools/check-meson.py --fix" on the DPDK repo fixes a
number of issues with whitespace and formatting of files:
* indentation of lists
* missing trailing commas on final list element
* multiple list entries per line when list is not all single-line
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
PKT_RX_EIP_CKSUM_BAD has been declared deprecated but there was no
warning to applications still using it.
Fix this by marking as deprecated with the newly introduced
RTE_DEPRECATED.
Fixes: e8a419d6de ("mbuf: rename outer IP checksum macro")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
There is no reason for the DPDK libraries to all have 'librte_' prefix on
the directory names. This prefix makes the directory names longer and also
makes it awkward to add features referring to individual libraries in the
build - should the lib names be specified with or without the prefix.
Therefore, we can just remove the library prefix and use the library's
unique name as the directory name, i.e. 'eal' rather than 'librte_eal'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
