When .get_monitor_addr API was introduced, it was implemented in the
ixgbe driver, but only for the physical function; the virtual function
portion of the driver does not support that API.
Add the missing function pointer to VF device structure.
Fixes: 3982b7967b ("net/ixgbe: implement power management API")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Fixes a few different things:
* Remove 'fw_version' NULL checks, it is allowed if the 'fw_size' is
zero, 'fw_version' being NULL but 'fw_size' not zero condition checked
in ethdev layer
* Be sure required buffer size is returned if provided one is not big
enough, instead of returning success (0)
* Document in doxygen comment the '-EINVAL' is a valid return type
* Take into account that 'snprintf' can return negative value
* Cast length to 'size_t' to compare it with 'fw_size'
Fixes: bb42aa9ffe ("net/atlantic: configure device start/stop")
Fixes: ff70acdf42 ("net/axgbe: support reading FW version")
Fixes: e2652b0a20 ("net/bnxt: support get FW version")
Fixes: cf0fab1d2c ("net/dpaa: support firmware version get API")
Fixes: 748eccb97c ("net/dpaa2: add support for firmware version get")
Fixes: b883c0644a ("net/e1000: add firmware version get")
Fixes: 293430677e ("net/enic: add handler to return firmware version")
Fixes: 1f5ca0b460 ("net/hns3: support some device operations")
Fixes: bd5b86732b ("net/hns3: modify format for firmware version")
Fixes: ed0dfdd0e9 ("net/i40e: add firmware version get")
Fixes: e31cb9a362 ("net/ice: support FW version getting")
Fixes: 4f09bc55ac ("net/igc: implement device base operations")
Fixes: eec10fb0ce ("net/ionic: support FW version")
Fixes: 8b0b565742 ("net/ixgbe: add firmware version get")
Fixes: 4d9f5b8adc ("net/octeontx2: add FW version get operation")
Fixes: f97b56f9f1 ("net/qede: support FW version query")
Fixes: 83fef46a22 ("net/sfc: add callback to retrieve FW version")
Fixes: bc84ac0fad ("net/txgbe: support getting FW version")
Fixes: 2191347120 ("ethdev: add firmware version get")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Jiawen Wu <jiawenwu@trustnetic.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Running "./devtools/check-meson.py --fix" on the DPDK repo fixes a
number of issues with whitespace and formatting of files:
* indentation of lists
* missing trailing commas on final list element
* multiple list entries per line when list is not all single-line
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Restrict the "remove l3_l4_xsum_errors from rx_errors" to 82599 only for
hardware errata.
Fixes: 256ff05a9c ("ixgbe: fix Rx errors statistics for UDP checksum")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The validity verification of input parameters should be performed at
API layer, not in the PMD.
Fixes: 3a18c44b45 ("ethdev: add access to EEPROM")
Fixes: 40ff8b305a ("net/e1000: add module EEPROM callbacks for e1000")
Fixes: f2088e785c ("net/i40e: fix dereference before check when getting EEPROM")
Fixes: b74d0cd43e ("net/ixgbe: add module EEPROM callbacks for ixgbe")
Fixes: 8a6a09f853 ("net/mlx5: support reading module EEPROM data")
Fixes: 58f6f93c34 ("net/octeontx2: add module EEPROM dump")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If one calls ‘rte_eth_dev_rss_reta_update’ with ixgbe before starting
the device (but after setting everything else), then RSS RETA
configuration will be zero after starting the device.
This patch gives a notification if the port not started.
Bugzilla ID: 664
Fixes: 249358424e ("ixgbe: RSS RETA configuration")
Cc: stable@dpdk.org
Signed-off-by: Murphy Yang <murphyx.yang@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of getting the struct rte_flow_ops.
The filter type RTE_ETH_FILTER_GENERIC and
the filter operarion RTE_ETH_FILTER_GET are removed.
The new driver callback flow_ops_get replaces filter_ctrl.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
To support more representor type, this patch introduces representor type
enum. The enum is subject to be extended to support new representor in
patches upcoming.
For each devarg structure, only one type supported.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Rename PKT_RX_EIP_CKSUM_BAD to PKT_RX_OUTER_IP_CKSUM_BAD and
deprecate the original name. The new name is better aligned
with existing PKT_RX_OUTER_* flags, which should help reduce
confusion about its use.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is an 82599 errata that UDP frames with a zero checksum are
incorrectly marked as checksum invalid by the hardware. This was
leading to misleading PKT_RX_L4_CKSUM_BAD flag.
To fix it for the NEON path in Arm platform, change the bad UDP checksum to
unknown, and then let software application to recompute the checksum.
NICs: 82599(igb)
Driver: ixgbe(vector)
Architecture: arm64
$:./app/dpdk-testpmd -c 0x3 -w 0002:f9:00.0 -- -i
--port-topology=chained --enable-rx-cksum
test-pmd> set fwd rxonly
test-pmd> set verbose 1
test-pmd> start
1. UDP Test:
Package: (Ether()/IP()/UDP(checksum=0)
ol_flags: PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_GOOD
2. TCP Test:
Package: (Ether()/IP()/TCP(checksum=0)
ol_flags: PKT_RX_L4_CKSUM_BAD PKT_RX_IP_CKSUM_GOOD
Bugzilla ID: 629
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Reported-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
There is an 82599 errata that UDP frames with a zero checksum are
incorrectly marked as checksum invalid by the hardware. This was
leading to misleading PKT_RX_L4_CKSUM_BAD flag.
This patch changes the bad UDP checksum to PKT_RX_L4_CKSUM_UNKNOWN,
so the software application will then have to recompute the checksum
itself if needed.
Bugzilla ID: 629
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Reported-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Paolo Valerio <pvalerio@redhat.com>
Disable NFS header filtering whether NFS packets coalescing are
required or not, in order to make RSS can work on NFS packets.
The code without the patch does follow datasheet, but not consistent
with the ixgbe kernel driver. It causes NFS packets to be filtered
and make them flow into queue 0, before RSS can work on them.
Fixes: b826efba6d ("net/ixgbe: align register setting when RSC is disabled")
Fixes: 8eecb3295a ("ixgbe: add LRO support")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
The `data_sz` name is fine, but it looks out of place because nothing
else has "data" prefix in that structure. Rename it to "size", as well
as add more clarity to the comments around each struct member.
Fixes: 6a17919b0e ("eal: change power intrinsics API")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
For some types of NIC, jumbo frame is not supported in IOV mode,
so if a VF requests to configure the frame size to not bigger
than IXGBE_ETH_MAX_LEN, the kernel driver returns 0, but the DPDK
ixgbe PMD returns -1, this will cause the VF to fail to start
when the PF driven by DPDK ixgbe PMD.
This patch keeps ixgbe PMD's handling mode consistent with kernel
driver in above situation.
In addition, the value set by the command IXGBE_VF_SET_LPE
represents the max frame size, not the mtu.
Fixes: 1b9ea09c06 ("ixgbe: support X550")
Fixes: 95a27b3ba5 ("net/ixgbe: enable jumbo frame for VF")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition.
If the Ether overhead is larger than 18 when it supports VLAN tag,
that will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will normalize the boundary condition with 'RTE_ETHER_MTU'
and overhead even though current overhead is 18.
Fixes: 59d0ecdbf0 ("ethdev: MTU accessors")
Fixes: 95a27b3ba5 ("net/ixgbe: enable jumbo frame for VF")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Implement support for the power management API by implementing a
`get_monitor_addr` function that will return an address of an RX ring's
status bit.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Allows i40e and mlx5 PMDs to compile on Windows and disable other drivers.
Disable few i40e warnings with Clang such as comparison of integers of
different signs and macro redefinitions.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
ixgbe devices support up to 8 Rx and Tx queues per virtual function.
Currently, the registers of only seven queues are set to default when
resetting a VF.
Signed-off-by: Simon Ellmann <simon.ellmann@tum.de>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
When a flexbytes flow director rule is created, the FDIRCTRL.FLEX_OFFSET
register is set, and it keeps its affect even after the flow director
flexbytes rule is destroyed, causing packets to be transferred to the
wrong place.
It is because setting FDIRCTRL shall only be permitted on Flow Director
initialization flow or clearing the Flow Director table according to the
datasheet, otherwise device may behave unexpectedly.
In order to evade this limitation, simulate the Flow Director
initialization flow or clearing the Flow Director table by setting
FDIRCMD.CLEARHT to 0x1B and then clear it back to 0x0B.
Fixes: f35fec63dd ("net/ixgbe: enable flex bytes for generic flow API")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Tested-by: Jun W Zhou <junx.w.zhou@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
If a VF request to set a invalid maximum packet length value,
The PF kernel driver may disable its reception.
This patch add codes to output information and return the error status.
Fixes: 12cd0cccc3 ("ixgbevf: allow to set MTU")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
IXGBE NEON vector PMD now supports checksum offloading, hence can be
used when DEV_RX_OFFLOAD_CHECKSUM is set.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Add CKSUM_GOOD flag to distinguish a good checksum from an unknown one
in neon vector RX function.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Updated desc_to_olflags_v() to support PKT_RX_IP_CKSUM_BAD and
PKT_RX_L4_CKSUM_BAD in the ol_flags of the mbuf.
And then the NEON vector RX function can be called with hw_ip_checksum
enabled.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
For NEON vector of IXGBE PMD, introduce new flag PKT_RX_VLAN_STRIPPED to
show the case that the VLAN is stripped from the VLAN tagged packet.
This is because that the old flag PKT_RX_VLAN_PKT only indicates that
the packet is VLAN tagged, but cannot show whether VLAN is in
m->vlan_tci or in the packet at present. So add new flag to show the
vlan has been stripped by the hardware and its tci is saved in
m->vlan_tci when vlan stripping is enabled in the RX configuration of
the IXGBE PMD.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The flag of RTE_ETHTYPE_FLAGS_MAC has been checked twice, so remove the
first error message "Not supported by ethertype filter" which is not so
specific, and keep the error message "mac compare is unsupported" which
aligns to the definition of RTE_ETHTYPE_FLAGS_MAC.
Fixes: eb3539fc85 ("net/ixgbe: parse ethertype filter")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
net/ixgbe driver is the only user of the struct rte_eth_l2_tunnel_conf.
Move it to the driver and use ixgbe_ prefix instead of rte_eth_.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of FDIR filters RTE flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of L2 tunnel filter RTE flow API should be used.
Preserve RTE_ETH_FILTER_L2_TUNNEL since it is used in drivers
internally in RTE flow API support.
rte_eth_l2_tunnel_conf structure is used in other ethdev API
functions.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of N-tuple filter RTE flow API should be used.
Preserve struct rte_eth_ntuple_filter in ethdev API since
the structure and related defines are used in flow classify
library and a number of drivers.
Preserve RTE_ETH_FILTER_NTUPLE because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of SYN filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_SYN because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of EtherType filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_ETHERTYPE because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The limitation of burst size in vector rx was removed, since it should
retrieve as much received packets as possible. And also the scattered
receive path should use a wrapper function to achieve the goal of
burst maximizing.
Bugzilla ID: 516
Fixes: b20971b6cc ("net/ixgbe: implement vector driver for ARM")
Fixes: 0e51f9dc48 ("net/ixgbe: rename x86 vector driver file")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Remove the usage of rte_panic() within ixgbe_pf_host_init()
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The return value of rte_eth_switch_domain_alloc() was not being checked
within ixgbe_pf_host_init() which caused a coverity issue. If the call
fails a warning is logged using PMD_INIT_LOG() and *vfinfo is free'd.
ixgbe_pf_host_init() now has a return value which is checked in
eth_ixgbe_dev_init()
Coverity issue: 362795
Fixes: cf80ba6e20 ("net/ixgbe: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The device-specific metadata was stored in the deprecated field udata64.
It is moved to a dynamic mbuf field in order to allow removal of udata64.
The name rte_security_dynfield is not very descriptive
but it should be replaced later by separate fields for each type of data
that drivers pass to the upper layer.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The config options CONFIG_RTE_* are simple RTE_* defines with meson.
Now that make support is dropped, update the names in logs and comments.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
A lot of drivers export headers, reproduce the same facility than for
libraries.
Note: this change fixes an issue with the crypto scheduler headers which
were not installed properly. A separate backport will be sent to stable
branches.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Use the newer macros defined by meson in all DPDK source code, to ensure
there are no errors when the old non-standard macros are removed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function rte_eth_dev_release_port() is partially resetting
the struct rte_eth_dev. The drivers were completing this reset
with more pointers set to NULL in the close or remove operations.
More pointers are reset at ethdev level,
and some redundant assignments are removed from PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When closing a port, it is supposed to be already stopped,
and marked as such with "dev_started" state zeroed by the stop API.
Resetting "dev_started" before calling the driver close operation
was hiding the case of not properly stopped port being closed.
The flag "dev_started" is not changed anymore in "rte_eth_dev_close()".
In case the "dev_stop" function is called from "dev_close",
bypassing "rte_eth_dev_stop()" API,
the "dev_started" state must be explicitly reset in the PMD
in order to keep the same behaviour.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
