If the dependency common/mlx5 is explicitly disabled,
but net/mlx5 is not explicitly disabled,
Meson will read the full recipe of net/mlx5
and will fail when accessing a variable from common/mlx5:
drivers/net/mlx5/meson.build:76:4: ERROR: Unknown variable "mlx5_config".
The solution is to stop parsing net/mlx5 if common/mlx5 is disabled.
The deps array must be defined before stopping, in order to automatically
disable the build of net/mlx5 and print the reason.
The same protection is applied to other mlx5 drivers,
so it will allow using the variable mlx5_config in future.
Fixes: 22681deead ("net/mlx5/hws: enable hardware steering")
Reported-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Alex Vesker <valex@nvidia.com>
Insert internal list element to internal list before
register vdpa device, in order to call vdpa ops during
vdpa device registration.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Add new internal API "find_internal_resource_by_rte_dev"
to get device.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Change internal function name "find_internal_resource_by_dev"
to "find_internal_resource_by_pci_dev".
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Support dynamic enable or disable queue.
For front end, like QEMU, user can use ethtool to configure queue.
For example, "ethtool -L eth0 combined 3" to enable 3 queues pairs.
Signed-off-by: Huang Wei <wei.huang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
When configuring the hardware queue, we only configure queues which
have been enabled by vhost.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Signed-off-by: Huang Wei <wei.huang@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Set max_queues according to virtio spec.
For virtio BLK device, set max_queues to the value of num_queues
in struct virtio_blk_config.
For virtio NET device, read num_queues from struct ifcvf_pci_common_cfg,
get the queue pair number using num_queues and set max_queues to it.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Signed-off-by: Huang Wei <wei.huang@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Add new device id to support IFCVF_NET_TRANSITIONAL_DEVICE_ID (0x1000).
Rename macro from "IFCVF_BLK_DEVICE_ID" to "IFCVF_SUBSYS_BLK_DEVICE_ID".
Signed-off-by: Huang Wei <wei.huang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Increase the number of default Rx/Tx queue pairs to 8,
and add MQ feature flag to vDPA protocol features.
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Change cidx and pidx definition to mean used queue and avail
queue index respectively.
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The pci bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.
While at it, cleanup the code:
- fix indentation,
- remove unneeded reference to bus specific singleton object,
- remove unneeded list head structure type,
- reorder the definitions and macro manipulating the bus singleton object,
- remove inclusion of rte_bus.h and fix the code that relied on implicit
inclusion,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 23.0.
The map files are updated to the new ABI major number (23).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Special handling of removed drivers is also dropped in check-abi.sh and
a note has been added in libabigail.abignore as a reminder.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
libvhost calls dev_conf() before prosessing the
VHOST_USER_SET_VRING_CALL message for the last VQ. So
this message is processed after dev_conf() returns.
However, the dev_conf() function spawns a thread to set
rte_vhost_host_notifier_ctrl() before returning control to
libvhost. This parallel thread in turn invokes get_notify_area().
To get the notify_area, the vdpa driver needs to query the HW and
for this query it needs an enabled VQ.
But at the same time libvhost is processing the last
VHOST_USER_SET_VRING_CALL, and to do that it disables the last VQ.
Hence there is a race b/w the libvhost and the vdpa driver.
To resolve this race condition, query the HW and cache notify_area
inside dev_conf() instead of doing it the parallel thread.
Fixes: 630be406dc ("vdpa/sfc: get queue notify area info")
Cc: stable@dpdk.org
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fix null pointer dereference reported in coverity scan.
Output some log information when lm_cfg is null.
Make sure lm_cfg is not null before operate on lm_cfg.
Coverity issue: 378882
Fixes: d7fe5a2861 ("net/ifc: support live migration")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
As stated in the manual, pthread_attr_init return value should be
checked.
Besides, a pthread_attr_t should be destroyed once unused.
In practice, we may have no leak (from what I read in glibc current code),
but this may change in the future.
Stick to a correct use of the API.
Fixes: 5cf3fd3af4 ("vdpa/mlx5: add CPU core parameter to bind polling thread")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When DPDK app is running in the VF, it sometimes rings the doorbell
before dev_config has had a chance to complete and hence it misses
the event. As workaround, ring the doorbell when vDPA reports the
notify_area to QEMU.
Fixes: 630be406dc ("vdpa/sfc: get queue notify area info")
Cc: stable@dpdk.org
Signed-off-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This adds ConnectX-6 LX to the list of supported
Mellanox devices that run the MLX5 vdpa PMD.
Signed-off-by: Wisam Jaddo <wisamm@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
For vhost message VHOST_USER_GET_CONFIG, we do not check
payload size in vhost lib, we check payload size in driver
specific ops.
For ifc vdpa driver, we just need to make sure payload size
is not smaller than sizeof(struct virtio_blk_config).
Fixes: 856d03bcdc ("vdpa/ifc: add block operations")
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Found by nullfree.cocci.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[David: for lpm parts:]
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
[David: for vdpa/mlx5 parts:]
Acked-by: Matan Azrad <matan@nvidia.com>
[David: for dma/dpaa2, raw/ifpga, vdpa/mlx5:]
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
[David: reran cocci.sh and updated common/mlx5 and cryptodev asym test]
Signed-off-by: David Marchand <david.marchand@redhat.com>
Split the virtqs virt-queue resource between
the configuration threads.
Also need pre-created virt-queue resource
after virtq destruction.
This accelerates the LM process and reduces its time by 30%.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
pre-created virt-queue sub-resource in device probe stage
and then modify virtqueue in device config stage.
Steer table also need to support dummy virt-queue.
This accelerates the LM process and reduces its time by 40%.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Split the virtqs device close tasks after
stopping virt-queue between the configuration threads.
This accelerates the LM process and
reduces its time by 50%.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Split the virtqs LM log between the configuration threads.
This accelerates the LM process and reduces its time by 20%.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The virtq object and all its sub-resources use a lot of
FW commands and can be accelerated by the MT management.
Split the virtqs creation between the configuration threads.
This accelerates the LM process and reduces its time by 20%.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The driver creates a direct MR object of
the HW for each VM memory region,
which maps the VM physical address to
the actual physical address.
Later, after all the MRs are ready,
the driver creates an indirect MR to group all the direct MRs
into one virtual space from the HW perspective.
Create direct MRs in parallel using the MT mechanism.
After completion, the primary thread creates the indirect MR
needed for the following virtqs configurations.
This optimization accelerrate the LM process and
reduce its time by 5%.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The configuration threads tasks need a container to
support multiple tasks assigned to a thread in parallel.
Use rte_ring container per thread to manage
the thread tasks without locks.
The caller thread from the user context opens a task to
a thread and enqueue it to the thread ring.
The thread polls its ring and dequeue tasks.
That’s why the ring should be in multi-producer
and single consumer mode.
Anatomic counter manages the tasks completion notification.
The threads report errors to the caller by
a dedicated error counter per task.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The LM process includes a lot of objects creations and
destructions in the source and the destination servers.
As much as LM time increases, the packet drop of the VM increases.
To improve LM time need to parallel the configurations for mlx5 FW.
Add internal multi-thread management in the driver for it.
A new devarg defines the number of threads and their CPU.
The management is shared between all the devices of the driver.
Since the event_core also affects the datapath events thread,
reduce the priority of the datapath event thread to
allow fast configuration of the devices doing the LM.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The driver used a single global lock for any synchronization
needed for the datapath and control path.
It is better to group the critical sections with
the other ones that should be synchronized.
Replace the global lock with the following locks:
1.virtq locks(per virtq) synchronize datapath polling and
parallel configurations on the same virtq.
2.A doorbell lock synchronizes doorbell update,
which is shared for all the virtqs in the device.
3.A steering lock for the shared steering objects updates.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
dev_config operation is called in LM progress.
LM time is very critical because all
the VM packets are dropped directly at that time.
Move the virtq creation to probe time and
only modify the configuration later in
the dev_config stage using the new ability
to modify virtq.
This optimization accelerates the LM process and
reduces its time by 70%.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
To speed up queue creation time, event QP and CQ will create only once.
Each virtq creation will reuse same event QP and CQ.
Because FW will set event QP to error state during virtq destroy,
need modify event QP to RESET state, then modify QP to RTS state as
usual. This can save about 1.5ms for each virtq creation.
After SW QP reset, QP pi/ci all become 0 while CQ pi/ci keep as
previous. Add new variable qp_ci to save SW QP ci. Move QP pi
independently with CQ ci.
Add new function mlx5_vdpa_drain_cq to drain CQ CQE after virtq
release.
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The motivation of this change is to reduce vDPA device queue creation
time by creating some queue resource in vDPA device probe stage.
In VM live migration scenario, this can reduce 0.8ms for each queue
creation, thus reduce LM network downtime.
To create queue resource(umem/counter) in advance, we need to know
virtio queue depth and max number of queue VM will use.
Introduce two new devargs: queues(max queue pair number) and queue_size
(queue depth). Two args must be both provided, if only one argument
provided, the argument will be ignored and no pre-creation.
The queues and queue_size must also be identical to vhost configuration
driver later receive. Otherwise either the pre-create resource is wasted
or missing or the resource need destroy and recreate(in case queue_size
mismatch).
Pre-create umem/counter will keep alive until vDPA device removal.
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The driver wrongly takes the capability value for
the number of virtq pairs instead of just the number of virtqs.
Adjust all the usages of it to be the number of virtqs.
Fixes: c2eb33aaf9 ("vdpa/mlx5: manage virtqs by array")
Cc: stable@dpdk.org
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
vDPA driver first uses kernel driver to allocate doorbell (VAR) area for
each device. Then uses var->mmap_off and var->length to mmap uverbs device
file as doorbell userspace virtual address.
Current kernel driver provides var->mmap_off equal to page start of VAR.
It's fine with x86 4K page server, because VAR physical address is only 4K
aligned thus locate in 4K page start.
But with aarch64 64K page server, the actual VAR physical address has
offset within page (not located in 64K page start).
So the vDPA driver needs to add this within page offset
(caps.doorbell_bar_offset) to get the right VAR virtual address.
Fixes: 62c813706e ("vdpa/mlx5: map doorbell")
Cc: stable@dpdk.org
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
GCC 12 raises the following warning:
../drivers/vdpa/ifc/ifcvf_vdpa.c: In function ‘vdpa_enable_vfio_intr’:
../drivers/vdpa/ifc/ifcvf_vdpa.c:383:62: error: writing 4 bytes into a
region of size 0 [-Werror=stringop-overflow=]
383 | fd_ptr[RTE_INTR_VEC_RXTX_OFFSET + i] = fd;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
../drivers/vdpa/ifc/ifcvf_vdpa.c:348:14: note: at offset 32 into
destination object ‘irq_set_buf’ of size 32
348 | char irq_set_buf[MSIX_IRQ_SET_BUF_LEN];
| ^~~~~~~~~~~
Validate number of vrings to avoid out of bound access.
Bugzilla ID: 855
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Register address is different between net and blk device.
We are re-using most of the code, when register address is
different, we have to check net and blk device go through
different code.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Create a thread to poll and relay config space change interrupt.
Use VHOST_USER_SLAVE_CONFIG_CHANGE_MSG to inform QEMU.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Add some log of virtio blk device config space information
at vDPA launch before QEMU connects.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Add SW live-migration support to block device.
For block device, it is critical that no packet
should be dropped. So when virtio blk device is
paused, make sure hardware last_avail_idx and
last_used_idx are the same. This indicates all
requests have received acks, and no inflight IO.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
For the net device type, only interrupt of rxq needed to be relayed.
But for block, since all the queues are used for both read and write
requests. Interrupt of all queues needed to be relayed.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
For virtio blk device, re-use part of ifc driver ops.
Implement ifcvf_blk_get_config for virtio blk device.
Support VHOST_USER_PROTOCOL_F_CONFIG feature for virtio
blk device.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Re-use the vdpa/ifc code, distinguish blk and net device by pci_device_id.
Blk and net device are implemented with proper feature and ops.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
In order to speed-up the device suspend and resume, make the statistics
counters persistent in reconfiguration until the device gets removed.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch supports device cleanup callback API which is called when
the device is disconnected from the VM. Cached resources like VM MR and
VQ memory are released.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
During device suspend and resume, resources are not changed normally.
When huge resources were allocated to VM, like huge memory size or lots
of queues, time spent on release and recreate became significant.
To speed up, this patch reuses resources like VM MR and VirtQ memory if
not changed.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
To speed up device resume, create reuseable resources during device
probe state, release when device is removed. Reused resources includes
TIS,
TD, VAR Doorbell mmap, error handling event channel and interrupt
handler, UAR, Rx event channel, NULL MR, steer domain and table.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
