If for some reason vhost_driver_setup() fails, the list
element for the device may be freed without being removed
from the internal list of devices.
This patch fixes all the error paths, by unregistering the
device from Vhost library it has been registered, remove
the device from the list, reset device vring_state pointer
from the global table and only free vring state if it had
been allocated.
Fixes: 3d01b759d2 ("net/vhost: delay driver setup")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The mlx5 vDPA driver manages QP and CQ in order to forward the HW event
to the guest by the callfd file descriptor for each virtq.
The driver arms the CQ for the next CQE index that should be
completed by the HW in order to create completion event.
In the SW completion event handler, the driver arms the CQ again for the
next index,
The CQE index in the CQ doorbell and in the CQ doorbell record was
masked incorrectly with the CQ size mask while it should be masked only
with 0xFFFFFF mask.
Remove the CQ size mask, stay only with 0xFFFFFF mask.
Fixes: 8395927cdf ("vdpa/mlx5: prepare HW queues")
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When the port restarts, the flow ctrl register will be reset,
we need to make sure it can be configured the same as previous setting,
otherwise a register read error would occur. This patch fixes this
issue.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Tested-by: Tomasz Konieczny <tomaszx.konieczny@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Interrupt mapping should be 1:n queue(s).This patch fixes the
logic of interrupt bind by code reconstruction.
Fixes: 6a6cf5f88b ("net/i40e: enable multi-queue Rx interrupt for VF")
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If a function is added to the eth_dev_ops struct before
tx_descriptor_status function, this will cause ABI breakage. This is due
to static inline functions using this function, and some other functions
above it in the struct, so they cannot change position. A comment is
added to inform developers of this possible breakage.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The hardware can recognize and mark the layer 4 protocol type for TCP,
UDP and IPSec non-fragmented packets. For all the fragmented packets,
L4 type will be considered as None. This can be used when creating a
flow with L4 matching, then hops number will be reduced and a better
performance could be gained.
But for ICMP packets, it cannot be recognized correctly because it is
not a L4 protocol in the stack, even if the packet format is similar.
All the fragmented and non-fragmented ICMP will have the None L4 type.
Fragmented packets with incomplete headers could not hit the flow,
even for the first fragment. Because then it will make it complex to
defragment for both HW and SW. For other types, the implicit rules
could be used directly and all the fragments will miss the flow.
For ICMP packets, this should be done explicitly because all packets
have None type. The first fragment will still hit the flow if there is
no explicit rule.
All ICMP fragments will still hit the rules like ETH, ETH + IP, and
ETH + IP + "ICMP protocol" only since they are wildcard rules, and
there is no next layer protocol specified field in such rules.
Fixes: d53aa89aea ("net/mlx5: support matching on ICMP/ICMP6")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This adds new device id to the list of Mellanox devices
that runs mlx5 PMD.
- BlueField-2 integrated ConnectX-6 Dx network controller
This device is not ready yet, it is in development stage.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The PMD manages internally the priority of the flows in addition to the
user configured priority.
So, 2 flows with the same user priority may get different priority.
The method:
As much as the flow is more specific it gets higher priority
(higher means first to be matched).
In addition, When the user creates a RSS flow the PMD splits the flows
according to the flow RSS layers as the HW requests for RSS TIR.
The internal priority for each flow is decided by the flow last layer.
L2, L3 and L4 (L2 low and L4 high).
The tunnel layer was wrongly decided to be L4 all the time, even when
the flow is configured with inner-RSS.
Hence, the first RSS split which takes the tunnel layer priority all the
time will be matched before the more specific splits.
Change the priority of tunnel layer to be L2 when inner-RSS is
configured.
Fixes: d4a405186b ("net/mlx5: support tunnel RSS level")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Add tested Intel platforms with Intel NICs to v20.02 release note.
Signed-off-by: Bo Chen <box.c.chen@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Update driver/firmware version mapping table for new driver/firmware
supported in 20.02 release.
Signed-off-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
For ixgbe, there is restriction that data buffers of any transmitted
packet must include at least 12 bytes of the src/dst Ethernet MAC
addresses as well as 2 bytes of the Type/Len field, otherwise, tx hang
would happen.
This patch adds check for those illegal packets and protects TX from
hanging.
Fixes: 7829b8d52b ("net/ixgbe: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
PTP functionality has been broken after a change in kernel
where enum npc_kpu_lc_ltype is change to allow adjustment of
LTYPE_MASK to detect all types of IP headers.
Syncing the required changes in DPDK to fix the issue.
The kernel side changes available in marvell SDK version SDK-10.3.2.x.
Fixes: b5dc314044 ("net/octeontx2: support base PTP")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Stopping an already disabled vport leads to firmware
assert. Stop the vport only if it was started.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
On ungraceful termination of DPDK application, PMD VF driver
fails to re-load due to PF seeing the VF in unexpected state
during VF acquisition handshake.
This patch fixes it by allowing VF to request the PF for soft
FLR during the load in such cases so that it can get cleanly
re-loaded.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
IXGBE link status task uses rte alarm thread in old implementation.
Sometime ixgbe link status task takes up to 9 seconds. This will
severely affect the rte-alarm-thread dependent tasks in the
system, like interrupt or hotplug event. So replace with an
independent thread which has the same thread affinity settings
as rte interrupt.
Fixes: 0408f47ba4 ("net/ixgbe: fix busy polling while fiber link update")
Cc: stable@dpdk.org
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The NIST test vectors use the string 'PTlen' to denote text lengths
in case of encrypt & decrypt operations. So the same string needs to be
used while parsing PT and CT.
Fixes: 2adb3b4e7e ("examples/fips_validation: fix AES-GCM cipher length parsing")
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch extends creation of inline session to all the algorithms.
Previously the inline session was enabled only for AES-GCM cipher.
Fixes: 3a690d5a65 ("examples/ipsec-secgw: fix first packet with inline crypto")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Defects reported by coverity scan
uninit_use_in_call: Using uninitialized element of array clen when
calling cpu_crypto_bulk.
Coverity issue: 354233, 354234
Fixes: 957394f726 ("ipsec: support CPU crypto mode")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The name of the static function check_cryptodev_capablity()
is fixed for the word "capability".
There is no functional change.
The same typo is fixed in a comment in ip_fragmentation example.
Fixes: 05fe65eb66 ("test/ipsec: introduce functional test")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The macros RTE_MIN and RTE_MAX can be used in DPDK applications.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The Travis compilation is missing some dependencies to build all PMDs.
More PMDs are enabled in Travis which runs Ubuntu Bionic Beaver (18.04):
- ipn3ke (libfdt)
- mlx (libibverbs)
The next Ubuntu LTS, Focal Fossa (20.04) will allow to support more:
- af_xdp (libbpf)
- Intel crypto (libipsec-mb 0.53)
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The kernel modules are not built by default since below commit.
The Travis CI matrix can be simplified
by removing the redundant option enable_kmods=false,
and by removing some jobs which are redundant.
Note: there is no benefit in checking kmods in Travis Ubuntu.
Anyway different kernel versions and distributions are needed,
and the Technical Board is looking at moving the Linux kmods
out of this repository.
Fixes: 91a861e541 ("config: disable Linux kernel modules by default")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Change the definition of C99 style to C90 style.
compile log as below:
otx2_mempool_ops.c: In function ‘otx2_npa_populate’:
drivers/mempool/octeontx2/otx2_mempool_ops.c:790:2: error:
‘for’ loop initial declarations are only allowed in C99 mode
for (int i = 0; i < OTX2_L1D_NB_SETS; i++)
^
drivers/mempool/octeontx2/otx2_mempool_ops.c:790:2:
note: use option -std=c99 or -std=gnu99 to compile your code
Fixes: 9ed8e95c ("mempool/octeontx2: optimize for L1D cache architecture")
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
The client script for use with the telemetry library did not support
Python3, as the data being sent over the socket was in string format.
Python3 requires the data be explicitly converted to bytes before being
sent. Similarly, the received bytes need to be decoded into string
format.
Fixes: 53f293c9a7 ("usertools: replace unsafe input function")
Fixes: fe35622659 ("usertools: fix telemetry client with python 3")
Fixes: d1b94da4a4 ("usertools: add client script for telemetry")
Fixes: 4080e46c80 ("telemetry: support global metrics")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
Silent the following warning when running script with python 3.8:
> /usr/bin/dpdk-pmdinfo:542: SyntaxWarning: "is" with a literal.
> Did you mean "=="?
> if (autoload_path is None or autoload_path is ""):
As autoload_path can only be None or a string, directly check its bool
value.
Fixes: c67c9a5c64 ("tools: query binaries for HW and other support information")
Cc: stable@dpdk.org
Signed-off-by: Thomas Faivre <thomas.faivre@6wind.com>
OCTEON TX2 has 8 sets, 41 ways L1D cache, VA<9:7> bits dictate
the set selection.
Add additional padding to ensure that the element size always
occupies odd number of cachelines to ensure even distribution
of elements among L1D cache sets.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
The functions to lookup IPv4 and IPv6 were both using opaque
pointers (void *) when they should use a typed pointer instead.
The IP headers are not modified during lookup.
Get rid of unnecessary cast on the return from the function.
Replace complex trigraph expression with simple if to improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The initial route setup array is unmodified by the lpm code
and can be made constant. This depends on earlier patch to
fix the rte_lpm6 to use const.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Both the table setup and lookup do no modify their arguments.
Therefore the parameter should be constant.
This is not actually an API breakage since programs can be
recompiled without change. This is not an ABI breakage because
old programs will still run.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Introduce new application to provide user to evaluate and perform
custom functional and performance tests for FIB library.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Some unit tests has dependency on RING PMD,
so this patch is trying to fix those and other
closely related issues.
1)pdump, latency, bitrate, ring PMD and test_event_eth_tx_adapter
unit tests are dependent on ring PMD, so compile those
tests only when ring PMD is enabled else ignore.
2)get rid of make file error which was added by bond unit test
for ring PMD disabled case which is not necessary.
3)Tx adapter UT is dependent on RING PMD, but it was
observed that it was missing from the run in meson
build, so added it. TX adapter UT uses 'sw event and
'null' pmd drivers, so for shared builds the drivers .so
path has to be passed to the test args of meson UT run.
Fixes: 086eb64db3 ("test/pdump: add unit test for pdump library")
Fixes: fdeb30fa71 ("test/bitrate: add unit tests for bitrate library")
Fixes: 1e3676a06e ("test/latency: add unit tests for latencystats library")
Fixes: 46cf97e4bb ("eventdev: add test for eth Tx adapter")
Fixes: d23e09e0ef ("app/test: link with ring pmd when needed")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Tested-by: Nikhil Rao <nikhil.rao@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
The tree dpdk-next-tm does not exist anymore.
Traffic management and metering APIs, which are part of ethdev,
can be merged in the existing tree dpdk-next-qos.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add a programmer's guide section for meson ut
Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Michael Santana <msantana@redhat.com>
Update the documentation on building and running apps on FreeBSD, taking
account of having used meson for building. We can also update the section
on the command-line parameters, rather than claiming to be a complete list
of parameters, it should describe how to get the complete list and only
cover a few important ones.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The kernel modules are now installed in the correct system location on
install when using meson and ninja, so update the documentation to remove
any references to the "kmod" directory. Also, make a few additional updates
to improve clarity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Update the FreeBSD GSG doc with instructions for installing
using meson and ninja rather than make.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Update the FreeBSD GSG to cover installing from the pre-built package as
well as installing from a port.
Also, since the port is now based on meson, update the instructions for
compiling and running the example applications.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Update the introduction section note, to add in the fact that DPDK is now
packaged in FreeBSD, i.e. available as a pre-built binary package, as well
as being in the ports collection for manual building.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Generate a dependency file for the header files used in the API guide
so that the docs can be rebuilt if a header changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
For the doxygen API for the examples folder, we can generate a build
dependency file when we generate the examples.dox file. This allows
correct rebuilds if the files in examples change.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Changed the rte_ring chapter in programmer's guide to reflect
the addition of rte_ring_xxx_elem APIs. References to pointers
as ring elements is changed to generic term 'objects'.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Correct the documentation for obj_table in rte_ring_xxx_elem APIs.
Fixes: cc4b218790 ("ring: support configurable element size")
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Added introduction of rte_ring_xxx_elem APIs to release notes.
Fixes: cc4b218790 ("ring: support configurable element size")
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Skip master lcore when assigning cores to rx_queues as it is only used
to print stats.
Fixes: 4ff457986f ("examples/l2fwd-event: add default poll mode routines")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
