Use the functions introduced in the previous commit to dump the offload
flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In addition to the packet type returned by the PMD, also display the
packet type calculated by parsing the packet in software. This is
particularly useful to compare the 2 values.
Note: it does not mean that both hw and sw always have to provide the
same value, since it depends on what hardware supports.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add a new command "tunnel_tso set <tso_segsz> <port>" to enable
segmentation offload and set MSS to tso_segsz. Another command,
"tunnel_tso show <port>" is added to show tunneled packet MSS.
Result 0 means tunnel_tso is disabled.
The original commands, "tso set <tso_segsz> <port>" and "tso show
<port>" are only reponsible for non-tunneled packets. And the new
commands are for tunneled packets.
Below conditions are needed to make it work:
a. tunnel TSO is supported by the NIC;
b. "csum parse_tunnel" must be set so that tunneled pkts are
recognized;
c. for tunneled pkts with outer L3 is IPv4, "csum set outer-ip"
must be set to hw, because after tso, total_len of outer IP
header is changed, and the checksum of outer IP header calculated
by sw should be wrong; that is not necessary for IPv6 tunneled
pkts because there's no checksum field to be filled anymore.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
ts_params->conf.nb_queue_pairs should not be hard coded with device
specific number. It should be retrieved from the device info.
Any test which changes it should restore it to orig value.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Removed obsolete comments re inability to free and re-allocate
queue memory and obsolete workaround for it
which used to create maximum size queues first, then later
create smaller queues.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
This patch contains unit tests for libcrypto PMD. User can
use app/test application to check how to use this pmd and to
verify crypto processing.
Test name is cryptodev_libcrypto_autotest.
For performance test cryptodev_libcrypto_perftest can be used.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch rework AES tests .
In general - rename AES-named functions to blockcipher functions pattern.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Before adding the new ZUC tests, since they will use
the existing common functions for SNOW3G and KASUMI,
these functions are renamed to *_wireless_algo_*,
instead of *_snow3g_kasumi_*, as they are common
functions for all the three wireless algorithms.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Improve error message if crypto PMD build is not enabled in config file
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds AES Galois Counter Mode performance test case
for cryptodev QAT and AESNI GCM. Test is performed with different
buffer sizes, burst size of 32 and 128b key. Test vectors
are placed in app/test/test_cryptodev_perf_vectors.h file.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Regardless the result of the conditional, the true and false
statements were the same, so the conditional can be removed.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch moves computing of pre-counter block into the AESNI-GCM
driver so it can be moved from test files.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
SNOW 3G algorithm has all uppercase letters in its name
and a space between SNOW and 3G, but some references of it
had some lowercase letters or no space.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch adds KASUMI tests in the QAT testsuite.
Alg-Chaining tests have also been added in the KASUMI
SW PMD.
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch fixes txonly raw packets allocations by resetting the
available headroom.
Indeed, some PMDs such as Virtio might prepend some data to the
packet, resulting in mbuf's data_off field to be decremented each
time the mbuf gets re-allocated.
For Virtio PMD, it means that we use only single descriptors for the
first times mbufs get allocated, as at some point there is not
enough headroom to store the header.
Other alternative would be use standard API to allocate the packets,
which does reset the headroom, but the impact on performance is too
big to consider this an option.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Now that rte_device is available, drivers can start using its members
(numa, name) as well as link themselves into another rte_device list.
As of now no one is using this list, but can be used for moving over all
devices (pdev/vdev/Xdev) and perform bulk actions (like cleanup).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Shreyansh: Reword commit log for extra rte_device list]
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Remove the 'name' member from rte_pci_driver and move to generic
rte_driver.
Most of the PMD drivers were initially using DRIVER_REGISTER_PCI(<name>..)
as well as assigning a name to eth_driver.pci_drv.name member.
In this patch, only the original DRIVER_REGISTER_PCI(<name>..) name has
been populated into the rte_driver.name member - assignments through
eth_driver has been removed.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Shreyansh: Rebase and expand changes to newly added files]
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Now that hotplug has been moved to eal, there is no reason to keep the
device type in this layer.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Probe and Remove are more appropriate names for PCI init and uninint
operations. This is a cosmetic change.
Only MLX* uses the PCI direct registration, bypassing PMD_* macro.
The callbacks for this too have been updated.
VDEV are left out. For them, init/uninit are more appropriate.
Suggested-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
When running single-core, some drivers tend to call rte_delay_us for a
long time, and that is causing packet drops.
To avoid this, rte_delay_us can be replaced with user-defined delay
function with:
void rte_delay_us_callback_register(void(*userfunc)(unsigned));
When userfunc==rte_delay_us_block build-in blocking delay function is
restored.
Signed-off-by: Jozef Martiniak <jozmarti@cisco.com>
Add a check to see if the primary process is running and exit gracefully
if it is not.
Suggested-by: Patrick Kutch <patrick.g.kutch@intel.com>
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
When testpmd is run, the application would hang on the second time
that "start" is executed. This is because the timer limit would get
multiplied to an unreachably high number.
At the start of flush_fwd_rx_queues(), the timer limit now resets
to stop it from getting to this high number.
The timer has been made local for this function.
Fixes: f487715f36f5 ("app/testpmd: add timeout in Rx queue flushing")
Signed-off-by: James Poole <james.g.poole@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Avoid access to mempool pointer if it is NULL.
Coverity issue: 127553
Fixes: b19a0c75a0d4 ("app/testpmd: remove anonymous mempool code")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
macro ‘APP_METADATA_OFFSET’ was not used to initialize
‘signature_offset’ and ‘key_offset’ part of struct
rte_table_hash_lru_params.
Instead integer offset values were directly used.
with this fix 'hash-8-lru', 'hash-16-lru', 'hash-32-lru' table types are
able to forward traffic as expected.
Fixes: 48f31ca50cc4 ("app/pipeline: packet framework benchmark")
Signed-off-by: Sankar Chokkalingam <sankarx.chokkalingam@intel.com>
Signed-off-by: Guruprasad Rao <guruprasadx.rao@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The pipeline object is not freed when a particular test-case of the
unit-test finishes. Using rte_pipeline_free() before returning the
outcome for each test-case fixes the issue.
Fixes: 5205954791cb ("app/test: packet framework unit tests")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The sched test consumes 35MB memory. When memory is too fragmented (with
2M hugepages), the test can fail.
To reduce this risk, decrease it to 4.5MB by modifying
n_pipes_per_subport and qsize.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
In hash autotest, the size of tables that should be successfully created
is 32K entries (256KB), except for the table called "different_name",
which is 1M entries (8MB). When memory is too fragmented (with 2M
hugepages), the test can fail.
To avoid allocation failures due to memory fragmentation, decrease the
size of the table to 32K.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds port for ACL library in ppc64le.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds ppc64le port for LPM library in DPDK.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Following discussions on the mailing list [1] and since nobody stood up to
implement the necessary cleanups, here is the ivshmem integration removal.
There is not much to say about this patch, a lot of code is being removed.
The default configuration file for packet_ordering example is replaced with
the "native" x86 file.
The only tricky part is in eal_memory with the memseg index stuff.
More cleanups can be done after this but will come in subsequent patchsets.
[1]: http://dpdk.org/ml/archives/dev/2016-June/040844.html
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The log history feature was deprecated in 16.07.
The remaining empty functions are removed in 16.11.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
There is a dependency on librt with old glibc.
The -lrt option was added everywhere it is needed but was also
added in some applications makefiles as the first link option.
The problem is this option is really useful only if added after
the objects or libraries using it (except if using --whole-archive).
And the -lrt options put after were removed to avoid duplicates.
It was resulting in errors linking test application:
eal_timer.c:(.text+0x128): undefined reference to `clock_gettime'
eal_timer.c:(.text+0x166): undefined reference to `clock_gettime'
eal_alarm.c:(.text+0xda): undefined reference to `clock_gettime'
eal_alarm.c:(.text+0x211): undefined reference to `clock_gettime'
It is fixed by removing superfluous -lrt in app makefiles.
Fixes: 281948b4753e ("mk: fix missing librt dependencies")
Fixes: 2f6414f4baf1 ("mk: fix static link with glibc < 2.17")
Reported-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The following tools may be installed system-wide.
It may be cleaner and more convenient to find them with the same
dpdk- prefix (especially for autocompletion).
Moreover, the script dpdk_nic_bind.py deserves a new name because it is
not restricted to NICs and can be used for e.g. crypto.
These files are renamed:
pmdinfogen -> dpdk-pmdinfogen
pmdinfo.py -> dpdk-pmdinfo.py
dpdk_pdump -> dpdk-pdump
dpdk_proc_info -> dpdk-procinfo
dpdk_nic_bind.py -> dpdk-devbind.py
setup.sh -> dpdk-setup.sh
The tools pmdinfogen, pmdinfo.py and dpdk_pdump are new in 16.07.
The scripts dpdk_nic_bind.py and setup.sh may have been used with
previous releases by end users. That's why a symbolic link still
provide the old name in the installed tools directory.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Function create_mp_ring_vdev() for failure cases exits without
freeing the created rte rings, because of this, pdump tool cannot be
rerun successfully. Added rte ring cleanup logic upon failures.
Fixes: caa7028276b8 ("app/pdump: add tool for packet capturing")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The autotest lists, requirements and distribution needs a big rework
to reduce the amount of cores and memory required.
The root cause is not addressed yet.
This patch just increase some memory allocation for some greedy tests
which often fail because of memory fragmentation:
LPM6 and reentrancy tests in groups 3 and 6 respectively.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Olivier Matz <olivier.matz@6wind.com>
The unavailable tests are filtered out by autotest by looking for
the symbols in the binary:
PCI autotest: Skipped [Not Available] [00m 00s]
Malloc autotest: Success [00m 00s]
It results to skip everything if the binary has no symbol (stripped):
PCI autotest: Skipped [Not Available] [00m 00s]
Malloc autotest: Skipped [Not Available] [00m 00s]
This case is handled by getting back to the old behaviour if the binary
has no symbol information:
PCI autotest: Fail [Not found] [00m 00s]
Malloc autotest: Success [00m 00s]
Fixes: d553c8f2b1a2 ("app/test: filter out unavailable tests")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Olivier Matz <olivier.matz@6wind.com>
