The version message is double spaced in the log.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This message doesn't need to be at INFO level, it is a normal
situation and only useful for debugging.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Shifting signed 32-bit values by 31-bits has the potential for
unexpected outcomes as compiler can overwrite a bit.
Specified that values are unsigned.
Errors are observed from running cppcheck.
Bugzilla ID: 58
Fixes: 69e209be54 ("net/axgbe: add register map and related macros")
Fixes: b5bf771922 ("bnx2x: driver support routines")
Fixes: ed2ced6fe9 ("net/bnxt: check initialization before accessing stats")
Fixes: 6fda3f0ddd ("net/cxgbe: add API to program hardware MPS table")
Fixes: bdb244b969 ("e1000: whitespace changes")
Fixes: 5a32a257f9 ("e1000: more NICs in base driver")
Fixes: 2fe669f4bc ("net/nfp: support MAC address change")
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Fixes: ec94dbc573 ("qede: add base driver")
Fixes: d2e7d931d0 ("net/qede/base: formatting changes")
Fixes: cdc07e83bb ("net/tap: add eBPF program file")
Cc: stable@dpdk.org
Signed-off-by: Andrius Sirvys <andrius.sirvys@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Set RTE_PCI_DRV_IOVA_AS_VA in drv_flags: this allows initializing bnxt
PMD as non-root also on Linux v4.x, where /proc/self/pagemap can't be
accessed without CAP_SYS_ADMIN privileges.
Cc: stable@dpdk.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
ag_cons is used uninitialized, it is used when DEBUG enabled, remove
debug code.
Fixes: 0958d8b643 ("net/bnxt: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
With the enabling for hotplug on multi-process,
rte_eth_dev_pci_generic_remove can be used to detach the device from
a secondary process also. But we need to take care of the uninit callback
parameter to make sure it handles the secondary case correctly.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
When the firmware version and the driver HWRM version do not match,
we are logging some messages. These messages unnecessarily clutter
the logs and can add to the noise. We are logging the HWRM version
and the firmware version anyway. The difference in version numbers
can be gleaned from that. Removing the remaining log messages.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Firmware sets pf pair in default VNIC cfg. If the VLAN strip
setting is not available at this time, it will not be
configured correctly in the CFA.
Set the desired VLAN strip mode before default VNIC configuration.
Fixes: 7fe5668d2e ("net/bnxt: support VLAN filter and strip")
Cc: stable@dpdk.org
Signed-off-by: Bei Sun <bei.sun@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If a vnic is configured as default and the setting has not changed,
there is no need to issue this setting again to the FW.
Fixes: db678d5c2b ("net/bnxt: add HWRM VNIC configure")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We need to set HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST bit in
L2_FILTER_ALLOC for filtering non-tunnel packets based on outermost MAC.
Fixes: f92735db1e ("net/bnxt: add L2 filter alloc/init/free")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While registering vf's event completion ring to FW, use the wrong
macro, FW doesn't set up the event completion ring successfully,
VF can't receive any async event.
Fixes: 4535cad395 ("net/bnxt: handle VF/PF initialization appropriately")
Cc: stable@dpdk.org
Signed-off-by: Yongping Zhang <yongping.zhang@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In the current model, VFs are not trusted.
So it is not allowed to send many HWRM commands.
Newer firmware has added support to allow VF to be trusted.
Now the VF queries if it is a trusted entity and based on that
it can send HWRM commands to the firmware.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
For hardware having multiple embedded management processors the firmware
has added support to indicate if the comm channel to the processor has
been enabled. If the channel is enabled, switch the CFA NTUPLE and EM
filtering commands to use the kong channel.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support extended port statistics like COS bytes,
packets, XON -> XOFF and XOFF -> XON transitions in Tx and Rx path.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The HW can support maximum frame length of 9600 bytes.
And we are currently capping the max frame size to 9500 bytes.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
bnxt_start_xmit() was attempting to access an uninitialized ptr - txbd1
which would lead to segmentation fault.
Fix to initialize ptr to NULL and check for the same before access.
Fixes: f10258e39e ("net/bnxt: fix HW Tx checksum offload check")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There was no direct association between the rxq's VNIC and the
vnic_info[].
Explicitly associate the two in bnxt_mq_rx_configure().
Fixes: 0a256e4a54 ("net/bnxt: fix Rx ring count limitation")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
The reta_size being indicated in the bnxt_dev_info_get_op was incorrect.
Set it to the value supported by the hardware.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Tested-by: Randy Schacher <stuart.schacher@broadcom.com>
Firmware can restrict access to certain resources in the hardware
depending on various factors. In such cases when the PMD tries to
configure these resources the firmware will return
HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED error. Parse this and return
the standard EACCES error to the applications.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In bnxt_hwrm_flash_nvram, before attempting to allocate a buffer
we are grabbing the rte_spinlock. And if the allocation fails we
are returning before releasing the spinlock. We avoid the situation
by calling HWRM_PREP which grabs the lock after the buffer is
allocated successfully.
Fixes: 19e6af01bb ("net/bnxt: support get/set EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
In some cases we may not be freeing up memory allocated for certain
NVM commands because the code might have bailed out before reaching
rte_free(). This patch moves some code around to ensure the allocated
memory is freed before exiting the function.
Fixes: 19e6af01bb ("net/bnxt: support get/set EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Michael Wildt <michael.wildt@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
bnxt_clear_hwrm_vnic_filters() was removing the created filter from HW,
but not clearing the internal data structures by removing it from the
struct bnxt_vnic_info->filter list.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Setting of VLAN filter cmd was being done with incorrect flag value.
We need to use inner vlan fields instead of outer vlan.
Fixes: 7fe5668d2e ("net/bnxt: support VLAN filter and strip")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fixed size of fw_grp_ids in VNIC is limiting the number of Rx rings
being created. With this patch we are allocating fw_grp_ids dynamically,
allowing us to get over this artificial limit.
Fixes: 9738793f28 ("net/bnxt: add VNIC functions and structs")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If HWRM resource manager is enabled, check VF resources before proceeding.
Make sure there are enough resources allocated and return an error in case
of insufficient error.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While moving a flow to a different destination queue,
the l2_filter_id being passed to the FW command was incorrect.
Fix it by re-using the matching filter's l2_filter_id since
that is supposed to be the same in this case.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
rte_mbuf_data_iova returns a 64-bit address. But we are incorrectly
using only 32-bits of that. Use rte_cpu_to_le_64 instead of
rte_cpu_to_le_32
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is no need to update bnxt_hwrm_vnic_plcmode_cfg if new MTU is
not greater than the max data the mbuf can accommodate.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In bnxt_free_filter_mem(), check the filter type and call the
appropriate HWRM command to clear the filter from HW.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The L2 filter id is needed in many scenarios particularly when
we are repurposing the same ntuple filter with different destination
queues. This patch reverts a commit in which the L2 filter id was being
reset in clear_ntuple_filter().
Fixes: 1383434c90 ("net/bnxt: reset L2 filter id once filter is freed")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
When using multi-mbuf to xmit large packets, we need to use total
packet lengths (sum of all segments) to set txbd->flags_type.
Packets will not be sent when using tx_pkt->data_len(The first
segment of packets).
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Xiaoxin Peng <xiaoxin.peng@broadcom.com>
Reviewed-by: Herry Chen <herry.chen@broadcom.com>
Reviewed-by: Jason He <jason.he@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
update HWRM API to v1.9.2.9
Signed-off-by: Rob Miller <rob.miller@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Passing an invalid fw_vnic_id to the firmware will cause the
bnxt_hwrm_vnic_plcmode_cfg command to fail.
Add a check for VNIC id before sending message to firmware.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In preparation of more rte_flow support it has been decided to
separate out filter and flow into their own files. Functionally the
same.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Move check_zero_bytes into new bnxt_util.h file.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Packets destined to the to-be-stopped queue should not be dropped
(neither in HW nor in the driver), so re-program the RSS Table without
this queue on stop and add it back to the table on start unless it
is a Representor VF.
Since 0th entry is used for default ring, use fw_grp_id + 1 to change
the RSS table population logic by programming valid IDs instead of the
default zeroth entry in case of an invalid fw_grp_id.
Destroy and recreate the trio of Rx rings(compl, Rx, AG) every time in
start so that HW is in sync with software.
Fixes: 9b63c6fd70 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add more checks for checksum calculation offload.
Also check for tunnel frames and select the proper
buffer descriptor size.
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Xiaoxin Peng <xiaoxin.peng@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Jason He <jason.he@broadcom.com>
Reviewed-by: Qingmin Liu <qingmin.liu@broadcom.com>
We are not cleaning up all the memory and also not unregistering
the driver during device close operation. This patch fixes the issue.
Fixes: 8930749513 ("net/bnxt: free memory in close operation")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1) Use nb_rx_pkts instead of checking producer indices of Rx and
aggregator rings to decide if any Rx completions were processed.
2) Post Rx buffers early in Rx processing instead of waiting for
the budgeted burst quota.
3) Ring Rx CQ DB after Rx buffers are posted.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Batch more than one Tx requests such that only one completion
is generarted by the HW. We request a Tx completion for first
and last Tx request in the batch.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
