Change the prototype and the behavior of dev_ops->eth_mac_addr_set(): a
return code is added to notify the caller (librte_ether) if an error
occurred in the PMD.
The new default MAC address is now copied in dev->data->mac_addrs[0]
only if the operation is successful.
The patch also updates all the PMDs accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
If Rx descriptors are not available, pkts are dropped by default.
Fix rx_drop_en setting in bnxt_dev_info_get_op to reflect it.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the license header on bnxt files to be the standard
BSD-3-Clause license used for the rest of DPDK,
bring the files in compliance with the DPDK licensing policy.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When user reissues same flow director cmd with a different queue
update the existing filter to redirect flow to the new desired
queue as destination just like the other filters like 5 tuple and
generic flow.
Fixes: 2d64da097a ("net/bnxt: support FDIR")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
When the vnic_tpa_cfg HWRM command is sent to the FW,
we are not passing the VNIC ID in case of disable.
This can cause the FW to return an error.
Correct VNIC ID needs to be passed for both enable and disable.
Fixes: 0958d8b643 ("net/bnxt: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The hw flags are not read correctly: the defines
RX_PKT_CMPL_FLAGS_ITYPE_* are not bits but values, so the should not be
tested with if (value & X) but with if ((value & MASK) == X).
This was resulting in a wrong packet type.
For instance, an IPv4/ICMP packet was returning a value of 7 for
the layer 4, which is undefined.
This patch rework the way packet types are processed, to ensure
that only valid packet types will be advertised.
Fixes: 3d2a6644eb ("net/bnxt: support getting ptypes")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is no need to return an error if an existing MAC is added.
Fixes: 778b759ba1 ("net/bnxt: add MAC address")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not parsing for 100G speed correctly.
With this patch we should be able to configure 100G link.
Fixes: 90ed2b7229 ("net/bnxt: add 100G speed detection")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When Autoneg is turned off especially on remote side,
link does not come up. This patch fixes that.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix the Rx offload flags when the IP or L4 checksum is seen as incorrect
by the hardware. In this case, the proper value is PKT_RX_IP_CKSUM_BAD.
PKT_RX_IP_CKSUM_NONE means that the checksum may be incorrect in the
packet headers, but the integrity of the IP header is verified. This is
mostly useful for virtual drivers.
Fixes: 7ec39d8c52 ("net/bnxt: update status of Rx IP/L4 CKSUM")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The timestamp flag needs to be set in the offload flags
for the received pkt in case of PTP offload.
Fixes: b11cceb83a ("net/bnxt: support timesync")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
While using RSS, the pool count should be 1.
Fixes: 8103a57ab4 ("net/bnxt: handle Rx multi queue creation properly")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When the driver is loaded on a 100G NIC, the port speed is not
displayed correctly. Parse the 100G speed before displaying it.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently this is implemented entirely in the PMD as there is no
explicit support in the HW. Re-program the RSS Table without this queue
on stop and add it back to the table on start.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In certain cases the MAC address of a port could be all zeros.
Catch it early, log a message and fail the initialization.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Register for async events from the FW.
New events we are registering for include Link speed config changes,
PF driver unload and VF config change. Also log a message when the
async event arrives on the completion ring.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch implements driver specific log type doing away with
usage of RTE_LOG() for logging.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
During Tx ring allocation, the actual ring size configured in the HW
ends up being twice the number of txd parameter specified to the driver.
The power of 2 ring size wrongly adds a +1 while sending the ring
create command to the FW.
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The pointer to the user parameter of the callback registration is
automatically pass to the callback function.
There is no point to allow changing this user parameter by a caller.
That's why this parameter is always set to NULL by PMDs and set only
in ethdev layer before calling the callback function.
The history is that the user parameter was initially used
by the callback implementation to pass some information
between the application and the driver:
c1ceaf3ad0 ("ethdev: add an argument to internal callback function")
Then a new parameter has been added to leave the user parameter
to its standard usage of context given at registration:
d6af1a13d7 ("ethdev: add return values to callback process API")
The NULL parameter in the internal callback processing function
is now removed. It makes clear that the callback parameter is user
managed and opaque from a DPDK point of view.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When allocating a new mbuf for Rx, the value of m->data_off should not
be reset to its default value (RTE_PKTMBUF_HEADROOM), instead of reusing
the previous undefined value, which could cause the packet to have a too
small or too high headroom.
Fixes: 2eb53b134a ("net/bnxt: add initial Rx code")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Replace internal functions to get DMA address them with their generic
IOVA version. Also rename the 'data' variable to 'mbuf' for more
readability.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Check for availability of on-chip resources - like Queue count,
number stat context, number of ring groups before inheriting and
initializing as per application requirements.
Also check before creating a Tx or Rx queue make sure there are
enough resources to complete the request.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
bnxt_free_all_hwrm_rings() was freeing all the Rx Rings including
zero-ing out the memory for the Aggregation rings, but was not issuing
the FW cmd to destroy the AGG ring(s) from HW. This would manifest in
problems when port stop/port start would be issued as there would be a
HW ring leak every time port stop was issued.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When user re-issues same 5 tuple filter pattern cmd with different
destination queue, it would flag it as an existing match.
However, when deletion on this filter was attempted, it would crash
as the 'vnic' from which the filter was being removed from would be
different. Fix by updating the filter in the scenario where there
is a pattern match and only the destination queue varies.
Fixes: b7435d660a ("net/bnxt: add ntuple filtering support")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If the attribute/pattern for a flow is the same, with only the 'action'
i.e the destination queue index changing, allow it by cleaning up
the older ntuple filter and updating the existing flow with
the new filter rule having the new destination queue ID.
Also, clear the L2 filter during flow_destroy after destroying
the ntuple filter, otherwise the flow record is not completely purged
from the HW.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
filter1 which is used to just get the l2 filter FW id and not used
later was unnecessarily being inserted into a list and was not being
freed after it's use was done.
Fix it by not doing the list insertion and releasing it back to the free
filter pool.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
As per documentation, While supporting ethertype_filters matching
ether_types 0x0800 (IPv4) and 0x86DD (IPv6) is invalid.
But we were wrongly doing that. This patch fixes it.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Maintain state of PMD initialization and check it before checking stats.
In certain cases, we might end up accessing stats before the required
HWRM commands are processed by FW.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Certain SKUs of NIC can support features like NPAR, Multi Host PFs per
port. We need to check for such features in order to restrict certain
HWRM commands from being sent to the FW.
For the single PF per port model, allow commands like hwrm_port_phy_cfg
from the PF driver. In NPAR and MH environments with multiple PFs per
port, we should not allow HWRM commands like hwrm_port_phy_cfg to be
sent to the FW.
This patch takes care of that.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If the FW fails bnxt_hwrm_func_reset() with an error status,
instead of returning -1, return a more standard value of -EIO.
Similarly sometimes the status returned by certain FW commands
may not be generic. Return a more standard value of -EIO in
that case as well.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Ring groups is a Rx only attribute. Make sure there are sufficient
ring groups available. Return an error if they are not available.
Fixes: 37d6161a68 ("net/bnxt: add ring group alloc/free")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Parse the Tx checksum offload flags and set the proper bits
in the Tx descriptor.
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are incrementing idx twice while allocating Tx rings.
Since this is passed to the firmware, it may cause unexpected behavior.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not checking for return values of functions like
bnxt_hwrm_queue_qportcfg and bnxt_hwrm_func_qcfg in bnxt_dev_init
thereby preventing a cleanup in case of a HWRM command failure.
This patch fixes that.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Implemented the 'time_sync' related APIs for supporting the PTP
protocol.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Remove a case where we were sending a deprecated field to the FW.
There is no need to send auto_link_speed to the FW.
Also set the auto_mode correctly depending on the setting requested.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not programming the vlan_spoof setting currently owing to
an unnecessary check. This patch fixes that.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In some cases when a VF driver is unloaded after the PF driver,
certain HWRM commands are returned with an error.
Instead the PF can tell the FW to permit these commands in order
to allow a clean unload.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Set the filter_type before we match a new filter against existing
filters. Otherwise we are missing the existing filters.
Fixes: 2d64da097a ("net/bnxt: support FDIR")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are wrongly "OR-ing" the vnic->hash_type instead of assigning
the new hash type thereby wrongly configuring hash settings.
Fixing it.
Fixes: fcc0aa1edc ("net/bnxt: add RSS hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The function rte_mem_virt2phy() is kept and used in functions which
works only with physical addresses.
For all other calls this function is replaced by rte_mem_virt2iova()
which does a direct mapping (no conversion) in the VA case.
Note: the new function rte_mem_virt2iova() function matches the
behaviour implemented in rte_mem_virt2phy() by the commit
680f6c1260 ("mem: honor IOVA mode in virt2phy")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Some devices may not support or fail setting VLAN offload
configuration based on dynamic circumstances so the
vlan_offload_set_t vector is modified to return an int so
the caller can determine success or not.
rte_eth_dev_set_vlan_offload is updated to return the
value provided by the vector when called along with restoring
the original offload configs on failure.
Existing vlan_offload_set_t vectors are modified to return
an int. Majority of cases return 0 but a few that actually
can fail now return their failure codes.
Finally, a vlan_offload_set_t vector is added to virtio
to facilitate dynamically turning VLAN strip on or off.
Signed-off-by: David Harton <dharton@cisco.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Fixes: 75cd6fb1d9 ("net/bnxt: fix the association of a MACVLAN per VNIC")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
return value stored in "rc" but it has been overwritten before use.
Coverity issue: 147216
Fixes: 7a5b087444 ("net/bnxt: support to add a VF MAC address")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are left shifting more bits than we should be doing.
This patch fixes that.
Coverity issue: 127546
Fixes: 778b759ba1 ("net/bnxt: add MAC address")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The case to handle redirect a flow to a VF is not handled.
This patch fixes it.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch removes some redundant code from bnxt_mq_rx_configure().
Fixes: 75cd6fb1d9 ("net/bnxt: fix the association of a MACVLAN per VNIC")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch simplifies logic for RSS queue creation.
1) Do not hardcode number of VNIC pools in case of RSS
2) Log a message if Number of queues is > RTE_ETHDEV_QUEUE_STAT_CNTRS
3) Move the check for allocation of l2_filter inside the for loop.
Fixes: 6133f20797 ("net/bnxt: add Rx queue create/destroy")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not setting the rx_offload capabilities. Fixing that.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not indicating VLAN insert capability of HW. Fixing it.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
We were not associating a MAC+VLAN per VNIC filter correctly.
This patch fixes that. Also set the VLAN type appropriately.
Fixes: f92735db1e ("net/bnxt: add L2 filter alloc/init/free")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Match a flow against existing flows programmed in the HW
and prevent overlapping entries. Also change log level of
some logs to DEBUG.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not checking if a filter allocation succeeded.
And we end up accessing a null pointer after that.
Also invalidate the fw_l2_filter_id to prevent unnecessary
HW access and hence HWRM command failures during exit.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
For gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7),
As of 5ef3b79fdf, compilation of DPDK fails with the following
ERROR MESSAGE:
"bnxt_filter.c:960:117: error: ‘vnic’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]".
Resolve this by initializing 'vnic' to NULL;
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The compilation with gcc-6.3.0 and EXTRA_CFLAGS=-Og gives the following
error:
CC rte_pmd_bnxt.o
rte_pmd_bnxt.c: In function ‘rte_pmd_bnxt_set_all_queues_drop_en’:
rte_pmd_bnxt.c:116:6: error: ‘rc’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
int rc;
^~
This can happen if both bp->nr_vnics and bp->pf.active_vfs are 0.
Fix it by initializing rc to -EINVAL.
Fixes: 49947a13ba ("net/bnxt: support Tx loopback, set VF MAC and queues drop")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
We were hardcoding the max MAC addresses to 32, while the HW
can support more than that. This was restricting the number of VMDQ
pools that we could support. Use the value obtained from FW instead.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for ntuple filtering.
Only RTE_5TUPLE_FLAGS is supported currently.
RTE_2TUPLE_FLAGS is not supported.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for get/set_eeprom, get_eeprom_length dev_ops.
Defined the structures required to get/set the eeprom length/data
in hsi_struct_defs hdr file along with implementation.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In some cases the interrupt handler is accessing cpr, which has
already been freed causing segfaults. This patch avoids such accesses.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While gathering per queue stats, we are overwriting some of the
stats. This causes some of the counters in xstats to be incorrect.
Fixes: 577d3dced0 ("net/bnxt: refactor the query stats")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We were not setting the dev_info.hash_key_size. Setting it now.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not configuring the RSS settings updated by rss_hash_update().
Fixing it.
Fixes: fcc0aa1edc ("net/bnxt: add RSS hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
update ol_flags with the appropriate status of IP/L4 cksum in Rx path.
Fixes: 2eb53b134a ("net/bnxt: add initial Rx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not correctly setting hw checksum offload for all the
offload flags. This patch fixes that.
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Map ETH_VMDQ_ACCEPT_HASH_UC to the promiscuous bit.
Also, set ALLMULTI and MCAST when MCAST is set to ensure multicast traffic
is received regardless of the VF driver list.
Fixes: 4cfe399f65 ("net/bnxt: support to set VF rxmode")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In bnxt_hwrm_cfa_l2_set_rx_mask, we are ignoring the previous
setting of HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST and
setting it again, thereby wrongly enabling Broadcast.
Fixes: 244bc98b0d ("net/bnxt: set L2 Rx mask")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Even when rx buffer allocation fails, we are wrongly updating
the producer index. This patch fixes that.
Also in case of a buffer allocation failure, reattempt buffer
allocation before the rx handler exits.
Fixes: 2eb53b134a ("net/bnxt: add initial Rx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are currently not handling multi queue RX/RSS modes correctly.
If RSS is not requested, create one VNIC per RXQ.
Fixes: 6133f20797 ("net/bnxt: add Rx queue create/destroy")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The calculation for number of pools is wrong.
We are wrongly overwriting the calculated value with ETH_64_POOLS.
Accordingly fix the size of ff_pools array.
Fix the log message as well.
Fixes: 4cfe399f65 ("net/bnxt: support to set VF rxmode")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
start_grp_id is incremented wrongly. Fixing it.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are wrongly using just 16 bits of address from rte_mem_virt2phy
while filling the vlan table address instead of 64-bytes.
Most likely a copy-paste error.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Obtain the spinlock in HWRM_PREP()
Eliminate two unnecessary arguments in HWRM_PREP().
Unlock the spinlock before returning in HWRM_ERROR_CHECK()
Add new HWRM_UNLOCK() macro
Update usage of the thre macros.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The callback arguments to _rte_eth_dev_callback_process() are swapped.
Fix them.
Fixes: d6af1a13d7 ("ethdev: add return values to callback process API")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Only set the vlanonly bit if vlan_nonvlan is clear. Also, allow the
VLAN table to be cleared when vlanonly is set.
Clearing the VLAN table when vlanonly is set will stop all traffic
since it requires all frames to have a VLAN tag, and that tag to be
in the zero-length table. This is still a valid use case though,
and has been seen in the wild.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If the current VLAN anti spoof setting is same as the new value,
the firmware can return an error. Call the HWRM command to update
the new setting if it is different from the current value.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch sends the HWRM command to free a filter in the hardware,
before using it again.
Fixes: f92735db1e ("net/bnxt: add L2 filter alloc/init/free")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are wrongly using a Rx side HWRM command set_rx_mask to configure
VLAN anti-spoof. This being a Tx side feature, this patch
tries to fix it.
Since the HWRM command to do it is available only in
the newer firmware versions, the patch verifies the firmware
version before attempting to send the HWRM command to
the firmware.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch resets the VF stats during initialization
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
remove the unnecessary rte_delay in bnxt_set_hwrm_link_config
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Check if the vnic_id and rss_rule is not invalid before passing it
to the firmware to cleanup the VNIC. Log a message if the vnic_id
is invalid.
Fixes: db678d5c2b ("net/bnxt: add HWRM VNIC configure")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix use of local variable to avoid segfault.
cnt was incorrectly tested and decremented in the loop that removes
a VLAN from the table.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1) handle_async_event is a DEBUG level log message.
2) Log "Unable to get default VNIC for VF %d" at INFO level.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix an error message. Probably a copy/paste error.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
bnxt_hwrm_port_phy_cfg() was not setting enables appropriately.
This was causing undesired issues with link config.
This patch takes care of that.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not passing proper speed mask causing autoneg to not work
properly on 10GBase-T links. Use supported speeds from phy_qcfg
for auto mask to fix this.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch fixes the get link configuration code.
bnxt_get_hwrm_link_config was using wrong macros and wrongly
deriving link speed based on link status which was causing
incorrect link information to be displayed in few scenarios.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add code to avoid automatic clearing of VF stats on a function
reset or a stat context free.
Add rte_pmd_bnxt_set_vf_persist_stats() PMD specific API.
Fixes: dd46c6bbd5 ("net/bnxt: support get and clear VF specific stats")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Previously, no VNICs were allocated as the default VNIC,
even if they were configured as one. This patch fixes that error.
Fixes: db678d5c2b ("net/bnxt: add HWRM VNIC configure")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We used the default as a work-around for the 4-byte MTU VNICs,
but we filter those out now. So fix the calculation of VNICs
accordingly.
Fixes: ff63ebbb67 ("net/bnxt: determine the Rx status of VF")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Set the MTU of the device to MAX size possible.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support for Stratus VF devices.
Other than adding the VF device ID, we also are adding
support for short message format.
The new short firmware message of size 16 bytes points to a location
in host memory that contains the firmware message that the driver
wants the adapter to process. This indirection requires the
firmware to DMA the message into its own memory for processing.
When the firmware receives a Short Command Format, it will DMA the
firmware message from host memory into its internal memory and then
processes the message as it would have if it received the message
directly in the firmware communication channel.
With BCM57454, the number of VFs increase to 1K and so the requirement
for firmware communication channel memory on adapter becomes expensive.
The short firmware message saves the amount of memory required to support
1K VFs on adapter.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Device name resides in two different locations, in rte_device->name and
in ethernet device private data.
For now, the copy in the ethernet device private data is required for
multi process support, the name is the how secondary process finds about
primary process device.
But for drivers there is no reason to use the copy in the ethernet
device private data.
This patch updates PMDs to use only rte_device->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_driver->name has the driver name and all physical and virtual
devices has access to it.
Previously it was not possible for virtual ethernet devices to access
rte_driver->name field (because eth_dev used to keep only pci_dev),
and it was required to save driver name in the device private struct.
After re-works on bus and vdev, it is possible for all bus types to
access rte_driver.
It is able to remove the driver name from ethdev device private data and
use eth_dev->device->driver->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Jan Blunck <jblunck@infradead.org>
This patch fixes incorrect reporting of link status
1) When link is down, set speed to zero. Otherwise a wrong non-zero
speed will be displayed.
2) DAC cables can detect there is a signal, but it necessarily does not
mean link is up. Code previously treated this as link up.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Some HWRM defines are missing from hsi_struct_def_dpdk.h
This patch adds them.
Also remove duplicate HWRM_RING_GRP_ALLOC entry.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to configure the VF L2 Rx settings.
The per VF setting is maintained in bnxt_child_vf_info.l2_rx_mask
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to insert a default VF VLAN.
Also track the current default VLAN per vnic for the VF.
When setting the default VLAN, avoid setting it to the current value.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to allocate a filter and program
it in the hardware for every MAC address added to the specified
function.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to determine the Rx status of a VF.
It adds the rte_pmd_bnxt_get_vf_rx_status call, which calculates
the VNIC count of the function to get the Rx status.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to get and clear VF stats.
It also adds the necessary HWRM structures to send the command
to the firmware.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to
1) enable VF MAC anti spoof.
2) QOS configuration for specified VF.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add functions rte_pmd_bnxt_set_tx_loopback,
rte_pmd_bnxt_set_all_queues_drop_en and
rte_pmd_bnxt_set_vf_mac_addr to configure tx_loopback,
queue_drop and VF MAC address setting in the hardware.
It also adds the necessary functions to send the HWRM commands
to the firmware.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1) Use hwrm_stat_ctx_query command to query statistics
Using hwrm_stat_ctx_query command will allow polling
the statistics from hardware instead of using the current push
model from the hardware which does a DMA of the stats to the host
at fixed intervals.
2) Use the rx_mbuf_alloc_fail to track mbuf alloc failures.
3) We were wrongly incrementing hwrm_cmd_seq in bnxt_hwrm_stat_clear
and bnxt_hwrm_stat_ctx_alloc functions. This patch fixes that.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to enable and disable LRO
To support this feature, the driver creates an aggregator ring.
When the hardware starts doing LRO, it sends a tpa_start completion.
When the driver receives a tpa_end completion, it indicates that the
LRO chaining is complete.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to modify MTU using the set_mtu dev_op.
To support frames > 2k, the PMD creates an aggregator ring.
When a frame greater than 2k is received, it is fragmented
and the resulting fragments are DMA'ed to the aggregator ring.
Now the driver can support jumbo frames upto 9500 bytes.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
