Add FIB (Forwarding Information Base) library. This library
implements a dataplane structures and algorithms designed for
fast longest prefix match.
Internally it consists of two parts - RIB (control plane ops) and
implementation for the dataplane tasks.
Initial version provides two implementations for both IPv4 and IPv6:
dummy (uses RIB as a dataplane) and DIR24_8 (same as current LPM)
Due to proposed design it allows to extend FIB with new algorithms
in future (for example DXR, poptrie, etc).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Add RIB (Routing Information Base) library. This library
implements an IPv4 routing table optimized for control plane
operations. It implements a control plane struct containing routes
in a tree and provides fast add/del operations for routes.
Also it allows to perform fast subtree traversals
(i.e. retrieve existing subroutes for a given prefix).
This structure will be used as a control plane helper structure
for FIB implementation. Also it might be used standalone in other
different places such as bitmaps for example.
Internal implementation is level compressed binary trie.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Any file with ABI versioned functions needs different macros for shared and
static builds, so we need to accommodate that. Rather than building
everything twice, we just flag to the build system which libraries need
that handling, by setting use_function_versioning in the meson.build files.
To ensure we don't get silent errors at build time due to this meson flag
being missed, we add an explicit error to the function versioning header
file if a known C macro is not defined. Since "make" builds always only
build one of shared or static libraries, this define can be always set, and
so is added to the global CFLAGS. For meson, the build flag - and therefore
the C define - is set for the three libraries that need the function
versioning: "distributor", "lpm" and "timer".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Andrzej Ostruszka <amo@semihalf.com>
Reviewed-by: Andrzej Ostruszka <amo@semihalf.com>
If we want to add support for turning off components because of missing
dependencies, then we need to check for those dependencies before we
make a determination as to whether a component should be built or not,
assuming that the component says it should be built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
To help developers to get the correct dependency name e.g. when creating a
new example that depends on a specific component, print out the dependency
name for each lib/driver as it is processed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Now that there is a version of ether_aton in rte_ether, it can
be used by the cmdline ethernet address parser.
Note: ether_aton_r can not be used in cmdline because
the old code would accept either bytes XX:XX:XX:XX:XX:XX
or words XXXX:XXXX:XXXX and we need to keep compatibility.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Reconstructing IPv6 header after encryption or decryption requires
updating 'next header' value in the preceding protocol header, which
is determined by parsing IPv6 header and iteratively looking for
next IPv6 header extension.
It is required that 'l3_len' in the mbuf metadata contains a total
length of the IPv6 header with header extensions up to ESP header.
Fixes: 4d7ea3e145 ("ipsec: implement SA data-path API")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When configuring with meson we print out a list of enabled components, but
it is also useful to list out the disabled components and the reasons why.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
When a component uses either XOPEN_SOURCE or POSIX_C_SOURCE macro
explicitly in its build recipe, it restricts visibility of a non POSIX
features subset, such as IANA protocol numbers (IPPROTO_* macros).
Non standard features are enabled by default for DPDK both for Linux
thanks to _GNU_SOURCE and for FreeBSD thanks to __BSD_VISIBLE. However
using XOPEN_SOURCE or POSIX_(C_)SOURCE in a component causes
__BSD_VISIBLE to be defined to 0 for FreeBSD, causing different feature
sets visibility for Linux and FreeBSD. It restricts from using IPPROTO
macros in public headers, such as rte_ip.h, despite the fact they are
already widely used in sources.
Add __BSD_VISIBLE macro specified unconditionally for FreeBSD targets
which enforces feature sets visibility unification between Linux and
FreeBSD.
Add single -D_GNU_SOURCE to config/meson.build as a project argument
instead of adding separate directive for each project subtree.
This patch solves the problem of build breaks for [1] on FreeBSD [2]
following the discussion [3].
[1] https://mails.dpdk.org/archives/dev/2019-May/131885.html
[2] http://mails.dpdk.org/archives/test-report/2019-May/082263.html
[3] https://mails.dpdk.org/archives/dev/2019-May/132110.html
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Rather than having a separate version.map file for linux/BSD and an
exports definition file for windows for each library, generate the
latter from the former automatically at build time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add RCU library supporting quiescent state based memory reclamation method.
This library helps identify the quiescent state of the reader threads so
that the writers can free the memory associated with the lock less data
structures.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The rte_stack library provides an API for configuration and use of a
bounded stack of pointers. Push and pop operations are MT-safe, allowing
concurrent access, and the interface supports pushing and popping multiple
pointers at a time.
The library's interface is modeled after another DPDK data structure,
rte_ring, and its lock-based implementation is derived from the stack
mempool handler. An upcoming commit will migrate the stack mempool handler
to rte_stack.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Added meson workarounds to build helloworld on Windows.
Windows currently only supports kvargs and eal libraries.
This change restricts the build flow to supported libraries
only.
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
Updated lib/meson.build to create shared libraries on Windows.
Added DEF files to list the exports for the eal and kvargs libraries.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Reviewed-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
Most libraries and PMDs depend on eal, and eal depends only on kvargs,
so reorder the list in Meson to reflect this and take advantage of this
dependency chain.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since compat library is only a single header, we can easily move it into
the EAL common headers instead of tracking it separately. The downside of
this is that it becomes a little more difficult to have any libs that are
built before EAL depend on it. Thankfully, this is not a major problem as
the only library which uses rte_compat.h and is built before EAL (kvargs)
already has the path to the compat.h header file explicitly called out as
an include path.
However, to ensure that we don't hit problems later with this, we can add
EAL common headers folder to the global include list in the meson build
which means that all common headers can be safely used by all libraries, no
matter what their build order.
As a side-effect, this patch also fixes an issue with building on BSD using
meson, due to compat lib no longer needing to be listed as a dependency.
Fixes: a8499f65a1 ("log: add missing experimental tag")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The variable name in the error message had an extra '_' which caused
an actual meson error when the message would otherwise be printed to
give meaningful information about what was going wrong.
Fixes: 203b61dc5e ("build: improve error message for missing dependency")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Introduce librte_ipsec library.
The library is supposed to utilize existing DPDK crypto-dev and
security API to provide application with transparent IPsec processing API.
That initial commit provides some base API to manage
IPsec Security Association (SA) object.
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Added new rte_color definition in librte_meter to
consolidate color definition which is currently replicated
in various places such as rte_meter.h, rte_tm.h and rte_mtr.h
Created aliases for rte_tm_color, rte_mtr_color and rte_meter_color
to use new rte_color values.
The definitions of rte_tm_color, rte_mtr_color and rte_meter_color
will be deprecated in future.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
As part of the effort of consolidating the DPDK installation bits and
pieces across distros, set the default directory of lib/ where PMDs get
installed to dpdk/pmds-XX.YY. It's necessary to have a versioned
subdirectory as multiple ABI revisions might be installed at the same
time, so having a fixed name will cause trouble with the autoload
feature.
Small refactor with parsing and saving the major version to a variable,
since it's now used in 3 different places.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Timothy Redaelli <tredaelli@redhat.com>
This patch adds telemetry as a dependecy to all applications. Without these
changes, the --telemetry flag will not be recognised and applications will
fail to run if they want to enable telemetry.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds the infrastructure and initial code for the telemetry
library.
The telemetry init is registered with eal_init(). We can then check to see
if --telemetry was passed as an eal option. If --telemetry was parsed, then
we call telemetry init at the end of eal init.
Control threads are used to get CPU cycles for telemetry, which are
configured in this patch also.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Brian Archbold <brian.archbold@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The MAC addresses of a port can be matched with devargs.
As the conflict between rte_ether.h and netinet/ether.h is not resolved,
the MAC parsing is done with a rte_cmdline function.
As a result, cmdline library becomes a dependency of ethdev.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
We use _GNU_SOURCE all over the place, but often times we miss
defining it, resulting in broken builds on musl. Rather than
fixing every library's and driver's and application's makefile,
fix it by simply defining _GNU_SOURCE by default for all
builds.
Remove all usages of _GNU_SOURCE in source files and makefiles,
and also fixup a couple of instances of using __USE_GNU instead
of _GNU_SOURCE.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
After running meson to configure a DPDK build, it can be useful to know
what was automatically enabled or disabled. Therefore, print out by way of
summary a categorised list of libraries and drivers to be built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
EAL is a standard dependency of all libraries, except for those built
before it. We can therefore simplify the logic by just checking if EAL
has been processed, and make it a standard dependency if so.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
There is no need to check for each library, driver and example whether
certain cflags are supported. Instead of checking inside the loop, do
so outside and reuse the value.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When building a driver or library and a required internal dependency
is missing, the error message printed was:
Tried to get unknown variable "shared_rte_<libname>".
However, a better way to handle this is to catch the missing variable
earlier and convert it into a proper message, informing the user
that the required dependency is missing, and most importantly, what
library or driver wanted that dependency.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The following error hits if host cc compiler is clang(default one in most
linux distributions) and the cross compiler is gcc.
The root cause is: the hybride compilers add the warning options to the
meson project as project arguments, which apply for both host compiling and
cross compiling. But some options such as '-Wno-format-truncation' are not
supported nor recognized by clang, so they have to be removed from the
project arguments for the host compiler to run smoothily and added back as
cflags for the cross compiler to compile for cross source files.
The fix is remove unrecognized warning options from the meson project
arguments shared by gcc and clang, as add them specifically for gcc or
clang as cflags.
[265/893] Compiling C object
'buildtools/pmdinfogen/pmdinfogen@exe/pmdinfogen.c.o'. warning: unknown
warning option '-Wno-format-truncation' [-Wunknown-warning-option]
Fixes: a55277a788 ("devtools: add test script for meson builds")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Song Zhu <song.zhu@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Meson 0.46 fixed a bug where "extract_all_objects" would not recursively
extract objects not compiled from source for a target. To keep backward
compatibility, a "recursive" keyword-arg was added to make this optional.
The value is "false" by default for now, but will change to "true" in
future, so we hard-code it to "false" in our code to ensure future
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
librte_bpf provides a framework to load and execute eBPF bytecode
inside user-space dpdk based applications.
It supports basic set of features from eBPF spec
(https://www.kernel.org/doc/Documentation/networking/filter.txt).
Not currently supported features:
- JIT
- cBPF
- tail-pointer call
- eBPF MAP
- skb
- function calls for 32-bit apps
- mbuf pointer as input parameter for 32-bit apps
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add basic functions to manage compress devices,
including driver and device allocation, and the basic
interface with compressdev PMDs.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Library folder name and output library name are same except a few flaws
including librte_ether.
This library is network device abstraction layer, the name "ethdev" fits
better than "ether", and library & header files already named as ethdev.
Also there is a rte_ether.h in the net library which can cause confusion.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Introduces a new structure, rte_eth_devargs, to support generic
ethdev arguments common across NET PMDs, with a new API
rte_eth_devargs_parse API to support PMD parsing these arguments. The
patch add support for a representor argument passed with passed with
the EAL -w option. The representor parameter allows the user to specify
which representor ports to initialise on a device.
The argument supports passing a single representor port, a list of
port values or a range of port values.
-w BDF,representor=1 # create representor port 1 on pci device BDF
-w BDF,representor=[1,2,5,6,10] # create representor ports in list
-w BDF,representor=[0-31] # create representor ports in range
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add librte_rawdev to the meson build of DPDK.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The introduction of the event timer adapter library adds a dependency
on the rte_timer library from the rte_eventdev library. Update the
order so that the timer library comes after the eventdev library in the
linker command when statically linking applications.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Any flags added to the project args are automatically added to all builds,
both native and cross-compiled. This is not what we want for the -march
flag as a valid -march for the cross-compile is not valid for pmdinfogen
which is a native-build tool.
Instead we store the march flag as a variable, and add it to the default
cflags for all libs, drivers, examples, etc. This will allow pmdinfogen to
compile successfully in a cross-compilation environment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch changes the build process to group all .o files for a driver or
library into a static archive first, and then link the .o files together
into a shared library. This eliminates the need for separate static or
shared object builds when packaging, for instance.
The "default_library" configuration option now only affects the apps and
examples, which are either linked against the static or shared library
versions depending on the value of the option.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The EAL and compat libraries were special-cases in the library build
process, the former because of it's complexity, and the latter because
it only consists of a single header file.
By reworking the EAL meson.build files, we can eliminate the need for it to
be a special case, by having it build up and return the list of sources,
headers, and objects and return those to the higher level build file. This
should also simplify the building of EAL, as we can eliminate a number of
meson.build files that would no longer be needed, and have fewer, but
larger meson.build files (9 now vs 14 previous) - thereby making the logic
easier to follow and items easier to find.
Once done, we can pull eal into the main library loop, with some
modifications to support it. Compat can also be pulled it once we add in a
check to handle the case of an empty sources list.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Normally, each library has it's own version number based on the ABI.
Add an option to have all libs just use the DPDK version number as the
.so version.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Add non-EAL libraries to DPDK build. The compat lib is a special case,
along with the previously-added EAL, but all other libs can be build using
the same set of commands, where the individual meson.build files only need
to specify their dependencies, source files, header files and ABI versions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Support building the EAL with meson and ninja. This involves a number of
different meson.build files for iterating through all the different
subdirectories in the EAL. The library itself will be compiled on build but
the header files are only copied from their initial location once "ninja
install" is run. Instead, we use meson dependency tracking to ensure that
other libraries which use the EAL headers can find them in their original
locations.
Note: this does not include building kernel modules on either BSD or Linux
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
