Upcoming drivers will need to be able to support other bus types.
This is a transparent change to how struct eth_driver is initialized.
It has not function or ABI layout impact, but makes adding a later
bus type (Xen, Hyper-V, ...) much easier.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Fix trailing whitespace, space before tab and empty lines at end of file.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: fix indent and alignment in test_acl.h and test_sched.c]
Ran this code base through a script which:
- removes trailing whitespace
- removes space before tabs
- removes blank lines at end of file
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Fix spelling errors in strings and comments.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Yong Wang <yongwang@vmware.com>
The combined lib was being created after building the lib root dir.
With the new directory hierarchy, it should be created after the
drivers root dir instead.
Fixes: 980ed498eb ("drivers: create new directory")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Li Wei <lw@cn.fujitsu.com>
It wouldn't check the configured maximum packet length, and then
the scattered receiving function wouldn't be selected at all even
if it wants to receive a jumbo frame. The fix is to select the
correct RX function according to the configurations.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add coding standards document to guides directory. This document
codifies the current DPDK C coding conventions, to make it easier for
contributors to see the format their code should be in.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
As now subtree_id is not used acl_merge_trie() any more,
there is no point to calculate and maintain that information.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reported by Zi Hu:
"
cat test_data/rule1
@192.168.0.0/24 192.168.0.0/24 400 : 500 0 : 52 6/0xff
@192.168.0.0/24 192.168.0.0/24 400 : 500 54 : 65280 6/0xff
@192.168.0.0/24 192.168.0.0/24 400 : 500 0 : 65535 6/0xff
cat test_data/trace1
0xc0a80005 0xc0a80009 450 53 0x06
I run the test by:
sudo ./testacl -n 2 -c 4 -- --rulesf=./test_data/rule1
--tracef=./test_data/trace1
The result shows that the packet matches the second rule, which is wrong.
The dest port of the pkt is 53, so it should match the third rule.
"
Indeed there is problem at ACL build stage.
Sometimes acl_merge_trie() is too aggressive in trying to conserve
space at build time.
So it takes a wrong assumptions and didn't duplicate a node,
even when it should.
The easiest and safest fix seems to always duplicate a left non-root/non-leaf
node first, and let the further code to destroy the node, if it is not needed.
Reported-by: Zi Hu <huzilucky@gmail.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Remove 2 unneeded memset's. The info area is already cleared rte_eth_dev_info_get
and the statistics buffer is cleared by rte_eth_stats_get
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The stats area is already cleared before calling eth_stats_get().
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
eth_stats is already cleared by rte_eth_stats_get
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Using the "physical_package_id" as a fallback for determining the
numa node of a core tends to be unreliable. Fix this by using a
detection routine which reads the numa information from
/sys/devices/system/node and just returns a numa node of 0 on
failure.
Reported-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add a command-line parameter to l3fwd, to allow the user to specify the
destination mac address for each ethernet port used.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
On Fedora 22, with GCC 5.1, errors are reported due to array accesses
being potentially out of bounds. This commit fixes this by adding in an
extra bounds check to the loop counter.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
On Fedora 22, with GCC 5.1, errors are reported due to array accesses
being potentially out of bounds. This commit fixes this by adding in an
extra bounds check to the loop counters, or, in the case of stats reset,
by blindly zeroing the whole array, rather than just the part that is in
use.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
On Fedora 22, with GCC 5.1, errors are reported due to array accesses
being potentially out of bounds. This commit fixes this by adding in an
extra bounds check to the loop counter.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
On Fedora 22, with GCC 5.1, errors are reported due to array accesses
being potentially out of bounds. This commit fixes this by ensuring the
bounds check in the loop takes account of the array size.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The default value of RTE_MAX_QUEUES_PER_PORT is 256, which is too small
for some configurations for i40e. There will return an error when
configured queue number is larger than 256 in rte_eth_dev_configure().
For example, in vHost sample, PF queue number: 64,
configured vmdq pool number: 63, each vmdq pool has 4 queues,
there will be required 316 queues in a port.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
In DPDK, max_vfs means vf numbers created, not the max number vfs
the device supported.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
To get device VMDQ info when only i40e VMDQ feature is enabled.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The file rte_kni.h depends upon a number of other headers, some of which
are missing from the #include lines. The following #includes are added:
* rte_memory.h - for the definition of phys_addr_t
* rte_mempool.h - for the definition of mempool struct and the mempool
create function.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Marc Sune <marc.sune@bisdn.de>
rte_pci.h depends upon stdio.h for the definition of the FILE type. Add
in #include <stdio.h> to the file to satisfy this dependency in cases
where the including C file does not already include stdio.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Marc Sune <marc.sune@bisdn.de>
ICMP echo replies with invalid checksums may be dropped by network nodes or
ignored by the ping utility.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
In the icmpecho forwarding mode, ARP replies from testpmd contain
invalid zero-filled MAC addresses. This is broken since the commit below.
Fixes: 31db4d38de ("net: change arp header struct declaration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
In rte_mempool_obj_iter(), when element boundary coincides with page boundary,
even if a single page is required per object, a loop checks that the next page
is contiguous and drops the first one otherwise.
This commit checks subsequent pages only when several are required per object.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
rte_mempool_xmem_usage()'s return type is ssize_t which has the same
architecture-dependent width as size_t but is signed.
On 64-bit architectures, returning a negative uint32_t value without casting
to ssize_t first does not work as intended, the sign bit is lost and the
returned value is garbage.
This commit fixes an assertion failure in testpmd on 64 bit architectures
when combining --no-huge and --mp-anon outside of Xen Dom0:
PANIC in mempool_anon_create():
line 170 assert "elt_num == mp->size" failed
Fixes: 148f963fb5 ("xen: core library changes")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
A function in cmdline.c has a return that does not free buf properly.
Signed-off-by: Erik Ziegenbalg <eziegenb@brocade.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: John McNamara <john.mcnamara@intel.com>
This change adds automatic table references to the docs. The
table numbers in the generated Html and PDF docs are now
automatically numbered based on section.
Requires Sphinx >= 1.3.1.
This change:
* Adds a RST table:: directive to each table caption.
* Indents the tables to the required directive level.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
This change adds automatic figure references to the docs. The
figure numbers in the generated Html and PDF docs are now
automatically numbered based on section.
Requires Sphinx >= 1.3.1.
The patch makes the following changes.
* Changes image:: tag to figure:: and moves image caption
to the figure.
* Adds captions to figures that didn't previously have any.
* Un-templates the |image-name| substitution definitions
into explicit figure:: tags. They weren't used more
than once anyway and Sphinx doesn't support them
for figure.
* Adds a target to each image that didn't previously
have one so that they can be cross-referenced.
* Renamed existing image target to match the image
name for consistency.
* Replaces the Figures lists with automatic :numref:
:ref: entries to generate automatic numbering
and captions.
* Replaces "Figure" references with automatic :numref:
references.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
This change adds some simple handling for the :numref: directive
for Sphinx versions prior to 1.3.1. This allows the Guides
documentation to be built with older versions of Sphinx and still
produce reasonable results.
The patch replaces the :numref: reference with a link to the
target (for all Sphinx doc types). It doesn't try to label
figures/tables.
Full numref support with automatic figure/table numbering and
links can be obtained by upgrading to Sphinx 1.3.1 or later.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move xenvirt PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move vmxnet3 PMD to drivers/net directory.
As part of the move, rename the "vmxnet3" subdirectory, containing the
original FreeBSD drivers, from "vmxnet3" to the more standard name
"base", to indicate it contains the base drivers used for the
implementation.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move virtio PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move ring PMD to drivers directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move pcap pmd to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move null PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move mlx4 PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move ixgbe PMD to drivers/net directory.
As part of the move, we rename the ixgbe directory, containing the
ixgbe "base driver" code, from "ixgbe" to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move i40e PMD to drivers/net directory.
As part of the move, rename the "i40e" directory, containing the "base
driver" code, from "i40e" to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move fm10k PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move enic PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: move vnic/ to base/]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move e1000 pmd to drivers/net directory
As part of move, rename "e1000" subdirectory, which contains the code
from the "base driver", to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
