The pointer to struct eth_driver is not used and is already set
in struct rte_eth_dev.
It's a small cleanup in PMD API which probably needs more
attention to make clear what is a driver, a PCI driver, an
ethernet driver, etc.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch modifies testpmd behavior when setting:
rx_vlan add all vf_port (enabling all vlanids
to be passed thru rx filter on VF).
Rx_vlan_all_filter_set() function,
checks if the next vlanid can be enabled by the driver.
Number of vlanids is limited by the NIC and thus the NIC
do not allow to enable more vlanids than it can allocate
in VFTA table.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Some checks with rte_eth_dev_is_valid_port() were missed when merging
hotplug and callbacks features.
Fixes: c282abd2a6cd ("ethdev: remove assumption that port will not be detached")
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch fixes following errors with icc.
error #188: enumerated type mixed with another type
return -1;
Fixes: 92d94d3744d7 ("ethdev: attach or detach port")
Reported-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: John McNamara <john.mcnamara@intel.com>
After setting CONFIG_RTE_LIBRTE_EAL_HOTPLUG=n, GCC stop compiling:
rte_ethdev.c:430:1: error: ‘rte_eth_dev_get_device_type’ defined but not used
rte_ethdev.c:438:1: error: ‘rte_eth_dev_save’ defined but not used
rte_ethdev.c:450:1: error: ‘rte_eth_dev_get_changed_port’ defined but not used
rte_ethdev.c:464:1: error: ‘rte_eth_dev_get_addr_by_port’ defined but not used
rte_ethdev.c:481:1: error: ‘rte_eth_dev_get_name_by_port’ defined but not used
rte_ethdev.c:503:1: error: ‘rte_eth_dev_is_detachable’ defined but not used
The hotplug option allows to build in environment (BSD) not yet
supported by this new feature.
It should be removed when BSD will be supported.
Waiting this day, let's fix build with hotplug disabled.
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These functions are used for attaching or detaching a port.
When rte_eth_dev_attach() is called, the function tries to realize the
device name as pci address. If this is done successfully,
rte_eth_dev_attach() will attach physical device port. If not, attaches
virtual devive port.
When rte_eth_dev_detach() is called, the function gets the device type
of this port to know whether the port is come from physical or virtual.
And then specific detaching function will be called.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This new parameter is needed to keep device type like PCI or virtual.
Port detaching processes are different between PCI device and virtual
device.
RTE_ETH_DEV_PCI indicates device type is PCI. RTE_ETH_DEV_VIRTUAL
indicates device is virtual.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
The patch adds function pointer to rte_pci_driver and eth_driver
structure. These function pointers are used when ports are detached.
Also, the patch adds rte_eth_dev_uninit(). So far, it's not called
by anywhere, but it will be called when port hotplug function is
implemented.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This patch adds rte_eth_dev_release_port(). The function is used for
changing an attached status of the device that has specified name.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
To remove assumption, do like followings.
This patch adds "RTE_PCI_DRV_DETACHABLE" to drv_flags of rte_pci_driver
structure. The flags indicate the driver can detach devices at runtime.
Also, remove assumption that port will not be detached.
To remove the assumption.
- Add 'attached' member to rte_eth_dev structure.
This member is used for indicating the port is attached, or not.
DEV_ATTACHED indicates a port is attached.
DEV_DETACHED indicates a port is detached.
- Add rte_eth_dev_allocate_new_port().
This function is used for allocating new port.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add optional support for inline processing of packets inside the RX
or TX call. For an RX callback, what happens is that we get a set of
packets from the NIC and then pass them to a callback function, if
configured, to allow additional processing to be done on them, e.g.
filling in more mbuf fields, before passing back to the application.
On TX, the packets are similarly post-processed before being handed
to the NIC for transmission.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The 'callbacks' member of the rte_eth_dev structure has been renamed
to 'link_intr_cbs' to make it clear that it refers to callbacks from
NIC interrupts. This allows us to add other types of callbacks to
the structure without ambiguity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add an Ethernet type definition for Transparent Ethernet Bridging.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
RSS offload types were defined separately for 1/10G and 40G NICs,
and have no relationship with flow types. The modifications are to
unify all RSS offload types for all PMDs. Unified RSS offload types
have new and common names which can be used for any PMD or
applications, and decouple from specific hardwares.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with fm10k]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Flow types was defined actually for i40e hardware specifically,
and wasn't able to be used for defining RSS offload types of all
PMDs. It removed the enum flow types, and uses macros instead
with new names. The new macros can be used for defining RSS
offload types later. Also modifications are made in i40e and
testpmd accordingly.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with new flow director API]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It wrongly calculates the size of the flow type mask array. The fix
is to align the flow type maximum index ID with the number of
element bit width, and then divide the number of element bit width.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The old ethertype filter API was removed in commit 75db20648,
but was still in (newly integrated) version map for ABI.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Following structures are removed:
- rte_2tuple_filter
- rte_5tuple_filter
Following APIs are removed:
- rte_eth_dev_add_2tuple_filter
- rte_eth_dev_remove_2tuple_filter
- rte_eth_dev_get_2tuple_filter
- rte_eth_dev_add_5tuple_filter
- rte_eth_dev_remove_5tuple_filter
- rte_eth_dev_get_5tuple_filter
It also move macros TCP_*_FLAG to rte_eth_ctrl.h, and removes the macro
TCP_UGR_FLAG which is duplicated with TCP_URG_FLAG.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
[Thomas: remove also from version map]
This patch defines ntuple filter type RTE_ETH_FILTER_NTUPLE and its structure rte_eth_ntuple_filter.
It also corrects the typo TCP_UGR_FLAG to TCP_URG_FLAG
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Structure rte_syn_filter is removed.
Following APIs are removed:
- rte_eth_dev_add_syn_filter
- rte_eth_dev_remove_syn_filter
- rte_eth_dev_get_syn_filter
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove also from version map]
Structure rte_flex_filter is removed.
Following APIs are removed:
- rte_eth_dev_add_flex_filter
- rte_eth_dev_remove_flex_filter
- rte_eth_dev_get_flex_filter
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove also from version map]
This patch removes the flexbytes_offset from rte_fdir_conf, because
the flexible payload setting is done by flex_conf instead of flexbytes_offset.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds RTE_ETH_FLOW_TYPE_RAW and RTE_ETH_RAW_PAYLOAD to support the
flexible payload is started from the beginning of the packet.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Need to have do special things to set default mac address.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Implement VLAN stripping in software. This allows application
to be device independent.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
It is helpful to allow device drivers that don't support hardware
VLAN stripping to emulate this in software. This allows application
to be device independent.
Avoid discarding shared mbufs. Make a copy in rte_vlan_insert() of any
packet to be tagged that has a reference count > 1.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
rte_eth_stats_get is to get physical device statistics. Without
return status, caller does not know whether function fails or not
(i.e. invalid port_id, driver has no stats_get callback). Caller
cannot differiente normal 0 stats or error case. This fix adds
a return status to the function.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Since LSR interrupt is disabled by pmd drivers, link status in rte_eth_device is always down.
Bond slave_configure() enables LSR interrupt on devices to get notification if link status
changes. However, the LSC interrupt at device start time is still lost.
In this fix, call link_update to read link status from hardware
register at device start time.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
If the flag is advertised by a PMD, the NIC supports the outer IP
checksum TX offload of tunneling packets, therefore an application can
set the PKT_TX_OUTER_IP_CKSUM flag in mbufs when transmitting on this
port.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
To differentiate libraries that break ABI, we add a library version number
suffix to the library, which must be incremented when a given libraries ABI is
broken. This patch enforces that addition, sets the initial abi soname
extension to 1 for each library and creates a symlink to the base SONAME so that
the test applications will link properly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add linker version script files to each DPDK library to put a stake in the
ground from which we can start cleaning up API's
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
In order to support hash filter configuration, filter type of hash
is added, also the corresponding structures, macros and definitions
are added.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Structure rte_ethertype_filter is removed.
Following APIs are removed:
- rte_eth_dev_add_ethertype_filter
- rte_eth_dev_remove_ethertype_filter
- rte_eth_dev_get_ethertype_filter
It is replaced by filter_ctrl API.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Check mq mode for VMDq RSS, handle it correctly instead of returning an error;
Also remove the limitation of per pool queue number has max value of 1, because
the per pool queue number could be 2 or 4 if it is VMDq RSS mode;
The number of rxq specified in config will determine the mq mode for VMDq RSS.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Vlad Zolotarov <vladz@cloudius-systems.com>
In commit 59d0ecdbf0e1d6350 ("MTU accessors"),
max_frame_size was replaced with mtu.
Default size is ETHER_MTU = 1500.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The name of the rte_eth_fdir_flow's rte_eth_ipv6_flow attribute,
'ip6_flow', clashes with a macro defined in
/usr/include/netinet/ip6.h, such that when DPDK is linked with an
application that uses the afforementioned header, the macro is
expanded within the DPDK struct, causing a compilation error.
Rename the relevant attribute in DPDK to resolve this.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch set add support for dynamic link aggregation (mode 4) to the
librte_pmd_bond library. This mode provides auto negotiation/configuration
of peers and well as link status changes monitoring using out of band
LACP (link aggregation control protocol) messages. For further details of
LACP specification see the IEEE 802.3ad/802.1AX standards. It is also
described here
https://www.kernel.org/doc/Documentation/networking/bonding.txt.
In this implementation we have an array of mode 4 settings for each slave.
There is also assumption that for every port is one aggregator (it might
be unused if better is found).
Difference in this implementation vs Linux implementation:
- this implementation it is not directly based on state machines but current
state is calculated from actor and partner states (and other things too).
Some implementation details:
- during rx burst every packet Is checked if this is LACP or marker packet.
If it is LACP frame it is passed to mode 4 logic using slaves rx ring and
removed from rx buffer before it is returned
- in tx burst, packets from mode 4 (if any) are injected into each slave.
- there is a timer running in background to process/produce mode 4
frames form rx/to tx functions.
Some requirements for this mode:
- for LACP mode to work rx and tx burst functions must be invoked
at least in 100ms intervals
- provided buffer to rx burst should be at least 2x slave count size. This is
not needed but might increase performance especially during initial
handshake.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
CACHE_LINE_SIZE is a macro defined in machine/param.h in FreeBSD and
conflicts with DPDK macro version.
Adding RTE_ prefix to avoid conflicts.
CACHE_LINE_MASK and CACHE_LINE_ROUNDUP are also prefixed.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: updated on HEAD, including PPC]
A new structure of ethertype filter is defined in rte_eth_ctrl.h
for filter_ctrl api
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
The parameters port_id didn't match with comments about port.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
define structures for getting flow director statistics
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
