During probe, driver issues HWRM_CFA_ADV_FLOW_MGNT_QCAPS command.
But it is not using the command response anywhere which makes the
fw call redundant.
Remove the unnecessary HWRM_CFA_ADV_FLOW_MGNT_QCAPS call to fw.
Remove the redundant flow_flags in bnxt struct.
Fixes: afef822b2e ("net/bnxt: support creating SMAC and inner DMAC filters")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
"enum bnxt_hw_context" is defined in the header file, but is not
used anywhere.
Fixes: 9738793f28 ("net/bnxt: add VNIC functions and structs")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Inorder to offload flows on the vfrep device, it must be
populated with rte_flow_ops.
This patch enables the same.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Invoked 3 new APIs for the default flow create/destroy and to get
the action ptr for a default flow.
Changed ulp_intf_update() to accept rte_eth_dev as input and invoke
the same from the VF rep start function.
ULP Mark Manager will indicate if the cfa_code returned in the
Rx completion descriptor was for one of the default flow rules
created for the VF representor conduit. The mark_id returned
in such a case would be the VF rep's DPDK Port id, which can be
used to get the corresponding rte_eth_dev struct in bnxt_vf_recv
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Add "enum bnxt_ulp_intf_type” as the second parameter for the
port & func helper functions
2. Return vfrep related port & func information in the helper functions
3. Allocate phy_port_list dynamically based on port count
4. Introduce ulp_func_id_tbl array for book keeping func related
information indexed by func_id
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Select EEM Host or System memory via config parameter
- Add EEM system memory support for kernel memory
- Dependent on DPDK changes that add support for the HWRM_OEM_CMD.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Issue HWRM_PORT_PHY_QCAPS to the firmware to get the physical
port count of the device.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
add helper functions to get port & function related information
like parif, physical port id & vport id.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support to query parent PF information (MAC address,
function ID, port ID and default VNIC) from firmware.
Current firmware returns zero for parent default vnic,
a temporary Wh+-specific workaround is included until
that can be fixed.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use 'first_vf_id' and the 'vf_id' that is input as part of adding
a representor to obtain the PCI function ID(FID) of the VF(VFR endpoint).
Use the FID as an input to FUNC_QCFG HWRM cmd to obtain the default
vnic ID of the VF.
Along with getting the default vNIC ID by supplying the FW FID of
the VF-rep endpoint to HWRM_FUNC_QCFG, obtain and store it's
function svif.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added code to support Tx/Rx from a VF representor port.
The VF-reps use the RX/TX rings of the Trusted VF/PF.
For each VF-rep, the Trusted VF/PF driver issues a VFR_ALLOC FW cmd that
returns "cfa_code" and "cfa_action" values.
The FW sets up the filter tables in such a way that VF traffic by
default (in absence of other rules) gets punted to the parent function
i.e. either the Trusted VF or the PF.
The cfa_code value in the RX-compl informs the driver of the source VF.
For traffic being transmitted from the VF-rep, the TX BD is tagged with
a cfa_action value that informs the HW to punt it to the corresponding
VF.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Defines data structures and code to init/uninit
VF representors during pci_probe and pci_remove
respectively.
Most of the dev_ops for the VF representor are just
stubs for now and will be will be filled out in next patch.
To create a representor using testpmd:
testpmd -c 0xff -wB:D.F,representor=1 -- -i
testpmd -c 0xff -w05:02.0,representor=[1] -- -i
To create a representor using ovs-dpdk:
1. First add the trusted VF port to a bridge
ovs-vsctl add-port ovsbr0 vf_rep1 -- set Interface vf_rep1 type=dpdk
options:dpdk-devargs=0000:06:02.0
2. Add the representor port to the bridge
ovs-vsctl add-port ovsbr0 vf_rep1 -- set Interface vf_rep1 type=dpdk
options:dpdk-devargs=0000:06:02.0,representor=1
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support of internal exact match flows and the action
mark is supported for these flows.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
User could set max flow count by passing a devarg
"-w 0000:0d:00.0,max_num_kflows=64" to a DPDK application;
The value must be not less than 32K and be power-of-2;
the default value is 32K.
Signed-off-by: Shuanglin Wang <shuanglin.wang@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
bnxt PMD uses the macro BNXT_SUPPORTED_SPEEDS to validate
the user requested speed. But this has all the speed values
supported by the PMD and is not chip specific.
The check against this macro returns success when the user
tries set the speed to 100G on a port even if the chip does
not support 100G speed.
Fixed it to use bnxt_get_speed_capabilities() to check the
supported speeds by the chip.
Fixes: 1d0704f4d7 ("net/bnxt: add device configure operation")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix to allocate bnxt ulp context when TRUFLOW is enabled.
This patch reduces the size of struct bnxt.
Fixes: 313ac35ac7 ("net/bnxt: support ULP session manager init")
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are maintaining MAC address twice which is unnecessary.
This patch removes the copy which helps reduce size of bnxt structure.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is no need to maintain local copy.
This helps reduce the size of the bnxt structure.
Fixes: fcc0aa1edc ("net/bnxt: add RSS hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Consolidate flow stat related structs for performance improvement.
The intention of this patch is to reduce the size struct bnxt which
had grown because of recent changes and was impacting performance.
Fixes: 02a95625fe ("net/bnxt: add flow stats in extended stats")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Newer firmware advertises the number of TQM rings to allocate
context memory for. Use the firmware specified value and fall back
to the old value derived from "bp->max_q" if it is not available.
Fixes: f8168ca0e6 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Max Rx Ring count could be < Max stat contexts. While accounting
for stat contexts, this should be also considered and
the max ring count adjusted accordingly.
Fixes: f03e66cb64 ("net/bnxt: limit queue count for NS3/Stingray devices")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Firmware reports any fatal error (either ASIC or Firmware related) via a
new status register. This status register can provide more detailed
information about the firmware errors, especially if error occurs before
HWRM_VER_GET is issued. Attempt to map this register if it is present
and check for firmware status when VER_GET command fails.
Refactored the code to allocate the "bp->recovery_info" structure
in bnxt_init_fw() instead of doing in bnxt_hwrm_error_recovery_qcfg().
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
FW returns HWRM_ERR_CODE_HOT_RESET_PROGRESS(0xa) when it is
unable to process a specific cmd while hot reset is in progress.
Host driver is expected to keep retrying the cmd for 2s with
a gap of 50ms between each retrial.
Also, fixed to fail port start if the HWRM_FUNC_DRV_IF_CHANGE
still returns error after 2 seconds.
Fixes: 0b53359123 ("net/bnxt: inform firmware about IF state changes")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The ulp flow flush has been extended to support session flow
flush and function flow flush. The session flow flush is called when
there the device is sole owner of the session and it deletes all the
flows associated with that session. The function flow flush is
called if the device function is not the sole owner of the session,
it deletes all the flows that are associated with that device
function.
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
This patch allows to display flow stats in extended stats.
To do this, DMA-able memory is registered with the FW during device
initialization. Then the driver uses an alarm thread to query the
per flow stats using the HWRM_CFA_COUNTER_QSTATS HWRM command at
regular intervals and stores it locally which will be displayed
when the application queries the xstats.
The DMA-able memory is unregistered during driver cleanup.
This functionality can be enabled using the flow-xstat devarg and
will be disabled by default. The intention behind this is to allow
stats to be displayed for all the flows in one shot instead of
querying one at a time.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
A ULP session will contain all the resources needed to support
rte flow offloads. A session is initialized as part of rte_eth_device
start. A DPDK application can have multiple interfaces which
means rte_eth_device start will be called for each of these devices.
ULP session manager will make sure that a single ULP session is only
initialized once. Apart from this, it also initializes MARK database,
EEM table & flow database. ULP session manager also manages a list of
all opened ULP sessions.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This feature can be enabled by passing
"-w 0000:0d:00.0,host-based-truflow=1” to the DPDK application.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
VNIC is needed for the driver to program the action record for rx
flows. VNIC determines what receive rings to use to place the received
packets. This patch introduces a routine that will convert a given
dpdk port to VNIC.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
SVIF (source virtual interface) is used to represent a physical port,
physical function, or a virtual function. SVIF is compared during L2
context and exact match lookups in TX direction. SVIF is masked for
port information during L2 context and exact match lookup in RX direction.
Hence, driver needs this SVIF information to program L2 context and Exact
match tables.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Change HWRM_PREP to use pointer and use the full
HWRM enum
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
bnxt_rss_ctxts() function is declared in header file bnxt.h,
implemented in bnxt_ethdev.c, and called only in bnxt_ethdev.c.
Also many functions are declared in header file bnxt_hwrm.h,
implemented in bnxt_hwrm.c, and called only in bnxt_hwrm.c.
This patch moves these function declarations into bnxt_ethdev.c
and bnxt_hwrm.c, as static functions.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Initially when driver is loading, there is no HWRM timeout configured
by FW, the VER_GET command needs use default timeout as 500ms and
while recovering from fatal/non-fatal FW error, it should use timeout
as 50ms.
Fixes: 458f0360e8 ("net/bnxt: get default HWRM command timeout from FW")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Certain applications(Ex: OVS-DPDK) can issue rte_flow_create with mark
id set to 0. The mark table entry creation in the driver was assuming
non-zero mark ids. Fix it to have a valid flag for each entry.
Also, it is possible that both RSS flags and cfa_code/ mark id are set
as part of the Rx packet completion descriptor if the 'action' for a
flow is MARK + RSS.
Fix Rx completion processing to look for both fields as opposed to only
either.
Fixes: 94eb699bc8 ("net/bnxt: support flow mark action")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use "dev->data->dev_started" state, instead of local "dev_stopped"
to check whether port has been started or not.
Fixes: 316e412299 ("net/bnxt: fix crash when closing")
Cc: stable@dpdk.org
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
This change could help in reducing the size of bnxt PMD private
data structure by converting a uint8_t variable to use bit map flag.
Fixes: 5cd0e2889c ("net/bnxt: support NIC Partitioning")
Cc: stable@dpdk.org
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Use "dev->data->dev_started" state, instead of local BNXT_FLAG_INIT_DONE
to check whether device has been initialised or not.
Fixes: ed2ced6fe9 ("net/bnxt: check initialization before accessing stats")
Cc: stable@dpdk.org
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Allow RSS action with group ID 0. The RSS match check will ensure if
requested RSS action configuration parameters should be allowed as per
the VNIC's RSS configuration or not and if it does match as it is
by design in OVS-DPDK use case, the default vnic can be used to create
the filter. As part of this ensure that rx_queue_cnt for the default
vnic is setup during init as this field was being set only for non-zero
vnics while handling RSS action for flow create.
Check for out of bounds error while accessing the vnic array.
Fixes: adc0f81c65 ("net/bnxt: support RSS action")
Cc: stable@dpdk.org
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Max Tx rings count could be lesser than max Rx rings in some
cases, so take this into account as well.
Account for stat contexts available(one for each ring) along with
no: of completion rings(one for each ring) to cap the max no: of
Tx /Rx rings that can be possibly created.
Fixes: f03e66cb64 ("net/bnxt: limit queue count for NS3/Stingray devices")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In FreeBSD environment, nic_uio driver does not support interrupts
and rte_intr_callback_register() will fail to register interrupts
which in turn causes bnxt driver probe failure.
Fixed driver to ignore interrupt callback failures in FreeBSD.
Also fixed to not use a dedicated completion ring for async events
from FW and process these events on RXQ0 in FreeBSD.
Fixes: 6de4c538b3 ("net/bnxt: fix error handling in port start")
Fixes: 43f78b380f ("net/bnxt: retry IRQ callback deregistration")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Add support for RTE_FLOW_ACTION_TYPE_MARK.
Use the flow_id provided by FW during flow creation to lookup the
mark id provided by the application.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
We need to wait for up to 500ms to receive async event notification
after forcing link down. Similarly we need to wait for up to 10s for
link to come up after configuring the hardware for link up.
Fixes: c09f57b49c ("net/bnxt: add start/stop/link update operations")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
The purpose of this patch is used to add a new field "fw_cap"
in bnxt structure. The new "fw_cap" field store all the capabilities
reported by the FW. This information will help us to determine
the device capabilities when registering feature support with FW.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
During the registration process, the drivers must publish
"HOT_RESET_SUPPORTED" capability to the core firmware only
if core firmware is capable of Hot Reset.
Fixes: df6cd7c1f7 ("net/bnxt: handle reset notify async event from FW")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
