Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes a few different things:
* Remove 'fw_version' NULL checks, it is allowed if the 'fw_size' is
zero, 'fw_version' being NULL but 'fw_size' not zero condition checked
in ethdev layer
* Be sure required buffer size is returned if provided one is not big
enough, instead of returning success (0)
* Document in doxygen comment the '-EINVAL' is a valid return type
* Take into account that 'snprintf' can return negative value
* Cast length to 'size_t' to compare it with 'fw_size'
Fixes: bb42aa9ffe ("net/atlantic: configure device start/stop")
Fixes: ff70acdf42 ("net/axgbe: support reading FW version")
Fixes: e2652b0a20 ("net/bnxt: support get FW version")
Fixes: cf0fab1d2c ("net/dpaa: support firmware version get API")
Fixes: 748eccb97c ("net/dpaa2: add support for firmware version get")
Fixes: b883c0644a ("net/e1000: add firmware version get")
Fixes: 293430677e ("net/enic: add handler to return firmware version")
Fixes: 1f5ca0b460 ("net/hns3: support some device operations")
Fixes: bd5b86732b ("net/hns3: modify format for firmware version")
Fixes: ed0dfdd0e9 ("net/i40e: add firmware version get")
Fixes: e31cb9a362 ("net/ice: support FW version getting")
Fixes: 4f09bc55ac ("net/igc: implement device base operations")
Fixes: eec10fb0ce ("net/ionic: support FW version")
Fixes: 8b0b565742 ("net/ixgbe: add firmware version get")
Fixes: 4d9f5b8adc ("net/octeontx2: add FW version get operation")
Fixes: f97b56f9f1 ("net/qede: support FW version query")
Fixes: 83fef46a22 ("net/sfc: add callback to retrieve FW version")
Fixes: bc84ac0fad ("net/txgbe: support getting FW version")
Fixes: 2191347120 ("ethdev: add firmware version get")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Jiawen Wu <jiawenwu@trustnetic.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
RSS distribution field is U64, while the DPAA2 code
was using integer value, which is causing a issue
for MPLS having bit position 33.
This patch fixes the code to use unsigned long long.
Fixes: 1832bc8ee8 ("net/dpaa2: support MPLS distribution")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of getting the struct rte_flow_ops.
The filter type RTE_ETH_FILTER_GENERIC and
the filter operarion RTE_ETH_FILTER_GET are removed.
The new driver callback flow_ops_get replaces filter_ctrl.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change the Tx queue congestion notification to
the ratio of current queue size instead of fixed.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In case error packets are received by the Ethernet interface,
this patch enables receiving packets on the error queue,
printing the error and the error packet.
To enable, use the dev_arg as : fslmc:dpni.1,drv_error_queue=1
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add support for dev arg ``fslmc:dpni.1,drv_tx_conf=1``
It is optional for dpaa2 to use TX confirmation. DPAA2
can free the transmitted packets. However some use-case
requires the TX confirmation to be explicit.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPDMUX should not drop parse error packets. They shall
be left to the decision of the connected DPNI interfaces
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This is require as the interface is shared with Linux and we do not want
the dpdmux to be reset. Rather the default interface to kernel shall
continue.
command dpdmux_set_resetable is used to skip DPDMUX reset.
By default the DPDMUX_RESET command will reset the DPDMUX completely,
dpdmux_set_resetable command will be ignored in old MC firmware.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Added support for flow raw pattern and check that the call
for dpdmux_set_custom_key() which should be called
only once for a particular DPDMUX as all previous rules
will be erased with this call.
Hence calling it for the first time only.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch introduce a new PMD API, which can help the applications
to configure the max frame length for a given dpdmux interface
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add basic support for scheduling and shaping on dpaa2
platform.
HW supports 2 level of scheduling and shaping.
However the current patch only support single level.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch enables support to use the first segment
headroom to build the HW required Scatter Gather
Table. (if space is available).
This will avoid 1 less buffer for SG buffer creation.
Signed-off-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
According to DPDK Documentation, rte_eth_link_get API can wait up to 9
seconds for auto-negotiation to finish and then returns link status.
In current implementation of rte_eth_link_get API in DPAA2 drivers, it
was not waiting for auto negotiation to finish and was returning link
status DOWN
It can cause issues with DPDK applications which relies on
rte_eth_link_get API for link status and does not support link status
interrupt.
Similar kind of issue was seen in TRex Application.
This patch fixes this bug by adding wait for up to 9 seconds for auto
negotiation to finish.
Fixes: c56c86ff87 ("net/dpaa2: update link status")
Cc: stable@dpdk.org
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
add support for MPLS based distribution is supported.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports VLAN tag.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: e164084994 ("net/dpaa2: configure jumbo frames")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reasons for building not supported generally start with lowercase
because printed as the second part of a line.
Other changes:
- "linux" should be "Linux" with a capital letter.
- ARCH_X86_64 may be simply x86_64.
- aarch64 is preferred over arm64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The legacy filter API, including rte_eth_dev_filter_supported() and
rte_eth_dev_filter_ctrl() is removed. Flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The dpaa2 drivers have been hacking the deprecated field seqn for
internal features.
It is moved to a dynamic mbuf field in order to allow removal of seqn.
Signed-off-by: David Marchand <david.marchand@redhat.com>
A lot of drivers export headers, reproduce the same facility than for
libraries.
Note: this change fixes an issue with the crypto scheduler headers which
were not installed properly. A separate backport will be sent to stable
branches.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function rte_eth_dev_release_port() is partially resetting
the struct rte_eth_dev. The drivers were completing this reset
with more pointers set to NULL in the close or remove operations.
More pointers are reset at ethdev level,
and some redundant assignments are removed from PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Some timesync related source files are built only when
'RTE_LIBRTE_IEEE1588' config is set, which is missing in meson.
Building with '-DRTE_LIBRTE_IEEE1588' cflag will enable timesync
functionality in the files that are build, but it won't build files
that require 'RTE_LIBRTE_IEEE1588' config.
This causes the build error.
Fixing by removing config check in meson file and build all .c files by
default, but wrap relevant code part with 'RTE_LIBRTE_IEEE1588' macro.
Also removing 'RTE_LIBRTE_IEEE1588' ifdef around some fields of the data
structures, to not require finer grained macro wraps on the functions
using them.
Since the registration of the function disabled with macro check, having
functions compiled shouldn't affect the functionality.
Fixes: 184c39d165 ("net/dpaa2: add DPRTC sub-module")
Cc: stable@dpdk.org
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
DPAA2 has support for raw flow classification, which can
be used for any protocol rules. This change fixes flow key
pattern length match boundary condition with spec length.
Fixes: 3f881f8d6e ("net/dpaa2: support raw flow classification")
Cc: stable@dpdk.org
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
With removal of old close behavior, the private
port resources must be released in the .dev_close callback.
Freeing of port private resources is moved from
the ".remove(device)" to the ".dev_close(port)" operation
Signed-off-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Dpaa2 pmd has no need to bound host interface
for which we require if_index field.
Setting it to 0 as unused.
Fixes: 3e5a335d3f ("net/dpaa2: add basic operations")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
This patch is a preparation to hide the 'struct eth_dev_ops' from
applications by moving some device operations from 'struct eth_dev_ops'
to 'struct rte_eth_dev'.
Mentioned ethdev APIs are in the data path and implemented as inline
because of performance reasons.
Exposing 'struct eth_dev_ops' to applications is bad because it is a
contract between ethdev and PMDs, not really needs to be known by
applications, also changes in the struct causing ABI breakages which
shouldn't.
To be able to both keep APIs inline and hide the 'struct eth_dev_ops',
moving device operations used in ethdev inline APIs to 'struct
rte_eth_dev' to the same level with Rx/Tx burst functions.
The list of dev_ops moved:
eth_rx_queue_count_t rx_queue_count;
eth_rx_descriptor_done_t rx_descriptor_done;
eth_rx_descriptor_status_t rx_descriptor_status;
eth_tx_descriptor_status_t tx_descriptor_status;
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
DEV_RX_OFFLOAD_TIMESTAMP is per port, so the internal implementation
shall enable it on per port basis only.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This experimental API is no longer required as the same
purpose can be solved with standard DEV_RX_OFFLOAD_TIMESTAMP
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Currently, there is a potential problem that calling the API function
rte_eth_dev_set_vlan_offload to start VLAN hardware offloads which the
driver does not support. If the PMD driver does not support certain VLAN
hardware offloads and does not check for it, the hardware setting will
not change, but the VLAN offloads in dev->data->dev_conf.rxmode.offloads
will be turned on.
It is supposed to check the hardware capabilities to decide whether the
relative callback needs to be called just like the behavior in the API
function named rte_eth_dev_configure. And it is also needed to cleanup
duplicated checks which are done in some PMDs. Also, note that it is
behaviour change for some PMDs which simply ignore (with error/warning
log message) unsupported VLAN offloads, but now it will fail.
Fixes: a4996bd89c ("ethdev: new Rx/Tx offloads API")
Fixes: 0ebce6129b ("net/dpaa2: support new ethdev offload APIs")
Fixes: f9416bbafd ("net/enic: remove VLAN filter handler")
Fixes: 4f7d9e383e ("fm10k: update vlan offload features")
Fixes: fdba3bf15c ("net/hinic: add VLAN filter and offload")
Fixes: b96fb2f0d2 ("net/i40e: handle QinQ strip")
Fixes: d4a27a3b09 ("nfp: add basic features")
Fixes: 56139e85ab ("net/octeontx: support VLAN filter offload")
Fixes: ba1b3b081e ("net/octeontx2: support VLAN offloads")
Fixes: d87246a437 ("net/qede: enable and disable VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Avoids recalculation of DPAA2_IOVA_TO_VADDR, since this is somewhat
costly function on no-IOMMU setups.
Brings about 0.5 Gbps improvement at 19 Gbps speeds on LX2160 with 512b
packets.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Reviewed-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add support for raw flow, which can be used for any
protocol rules.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
TC distribution size is set with dist_queues or
nb_rx_queues % dist_queues in order of TC priority.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
1) dpni_set_rx_hash_dist and dpni_set_rx_fs_dist used for TC
configuration instead of dpni_set_rx_tc_dist. Otherwise,
re-configuration of default TC of QoS fails.
2) Default miss action is to drop. "export
DPAA2_FLOW_CONTROL_MISS_FLOW=flow_id" is used receive the missed
packets from flow with flow ID specified.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In HW/MC logical, QoS setup should follow FS setup.
In addition, Skip QoS setup if MAX TC number of DPNI is set 1.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
