The mlx5_xstats_reset clears the device extended statistics.
In this function the driver may reinitialize the structures
that are used to read device counters.
In case of reinitialization, the number of counters may
change, which wouldn't be taken into account by the
reset API callback and can cause a segmentation fault.
This issue is fixed by allocating the counters size after
the reinitialization.
Fixes: a4193ae3bc ("net/mlx5: support extended statistics")
Cc: stable@dpdk.org
Reported-by: Ralf Hoffmann <ralf.hoffmann@allegro-packets.com>
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The mlx5 PMD exposes the following new introduced
extended statistics counter to report the errors
of packet send scheduling on timestamps:
- txpp_err_miss_int - rearm queue interrupt was not handled
was not handled in time and service routine might miss
the completions
- txpp_err_rearm_queue - reports errors in rearm queue
- txpp_err_clock_queue - reports errors in clock queue
- txpp_err_ts_past - timestamps in the packet being sent
were found in the past, timestamps were ignored
- txpp_err_ts_future - timestamps in the packet being sent
were found in the too distant future (beyond HW/clock queue
capabilities to schedule, typically it is about 16M of
tx_pp devarg periods)
- txpp_jitter - estimated jitter in device clocks between
8K completions of Clock Queue.
- txpp_wander - estimated wander in device clocks between
16M completions of Clock Queue.
- txpp_sync_lost - error flag, the Clock Queue completions
synchronization is lost, accurate packet scheduling can
not be handled, timestamps are being ignored, the restart
of all ports using scheduling must be performed.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
mlx5 statistics are calculated by several methods:
1. In software when packets go through datapath.
2. Calling ioctl with ETHTOOL command (Linux specific).
3. Reading counters from SYSFS device path (Linux specific).
The Linux related functions are moved to file linux/mlx5_os.c.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
fgets(3)/fread(3)/fscanf(3) etc. use mmap(2)/munmap(2) which leads
to TLB shutdown interrupts to all DPDK app cores including RX cores.
This can cause packet drops. Use read(2)/write(2) instead.
Bugzilla ID: 440
Cc: stable@dpdk.org
Signed-off-by: Mohsin Shaikh <mohsinshaikh@niometrics.com>
Reviewed-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The Hw counters is defined as 32bit unsigned value and read from
the sysfs. Firstly read the base value while application start,
then fetch the new value while do query and minus the base value.
If the new value is less than base value, will result in a
negative value and convert to the big value as unsigned 64bit.
PMD add xstats field to store the last successfully read counter,
use it if failed to read hw counter from sysfs.
PMD also record the last output value to handle the wrap around case,
if overflow happened, increase the wrap count by 1 and save into the
higher 32bit, and update the new value into lower 32bit, finally
return the 64bit counter value.
Fixes: ce9494d76c ("net/mlx5: report imissed statistics")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Use the MLX5_ASSERT macros instead of the standard assert clause.
Depends on the RTE_LIBRTE_MLX5_DEBUG configuration option to define it.
If RTE_LIBRTE_MLX5_DEBUG is enabled MLX5_ASSERT is equal to RTE_VERIFY
to bypass the global CONFIG_RTE_ENABLE_ASSERT option.
If RTE_LIBRTE_MLX5_DEBUG is disabled, the global CONFIG_RTE_ENABLE_ASSERT
can still make this assert active by calling RTE_VERIFY inside RTE_ASSERT.
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Move PCI detection by IB device from mlx5 PMD to the common code.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
A new Mellanox vdpa PMD will be added to support vdpa operations by
Mellanox adapters.
This vdpa PMD design includes mlx5_glue and mlx5_devx operations and
large parts of them are shared with the net/mlx5 PMD.
Create a new common library in drivers/common for mlx5 PMDs.
Move mlx5_glue, mlx5_devx_cmds and their dependencies to the new mlx5
common library in drivers/common.
The files mlx5_devx_cmds.c, mlx5_devx_cmds.h, mlx5_glue.c,
mlx5_glue.h and mlx5_prm.h are moved as is from drivers/net/mlx5 to
drivers/common/mlx5.
Share the log mechanism macros.
Separate also the log mechanism to allow different log level control to
the common library.
Build files and version files are adjusted accordingly.
Include lines are adjusted accordingly.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Transmit errors must not be reported in q_errors[] which is for
reception.
Fixes: 87011737b7 ("mlx5: add software counters")
Fixes: 9f9a48eb29 ("net/mlx5: fix Tx stats error counter definition")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Queue index is redundantly stored for both Rx and Tx structures.
E.g. txq_ctrl->idx and txq->stats.idx. Both are consolidated to single
storage - rxq->idx and txq->idx.
Also, rxq and txq are moved to the beginning of its control structure
(rxq_ctrl and txq_ctrl) for cacheline alignment.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The IB device names are moved from device private data
to the shared context, code involving the names is updated.
The IB port index treatment is added where it is relevant.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The private structure stored in rte_eth_dev->data->dev_private
was named "struct priv".
In order to ease code browsing, the structure is renamed
"struct mlx[45]_priv".
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The imissed counters (number of packets dropped because the queues were
full) were actually reported through xstats as "rx_out_of_buffer"
but was not reported through stats.
Following a recent discussion on the ML, as there is no way to tell the
user if a counter is implemented or not, this should be considered a
bug. For example, user looking at imissed will think the packets are
lost before reaching the device.
Signed-off-by: Tom Barbette <barbette@kth.se>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch fixes compilation errors with meson and the clang
compiler caused by some of the struct members not being
initialized.
```
../drivers/net/mlx5/mlx5_mr.c:345:37: error: missing field 'end'
initializer [-Werror,-Wmissing-field-initializers]
struct mlx5_mr_cache entry = { 0, };
^
../drivers/net/mlx5/mlx5_mr.c:389:36: error: missing field 'end'
initializer [-Werror,-Wmissing-field-initializers]
struct mlx5_mr_cache ret = { 0, };
^
../drivers/net/mlx5/mlx5_mr.c:691:35: error: missing field 'end'
initializer [-Werror,-Wmissing-field-initializers]
struct mlx5_mr_cache ret = { 0, };
^
```
The compilation errors reproduce with
clang version 3.4.2 (tags/RELEASE_34/dot2-final) on RHEL.
Fixes: e1114ff6a5 ("net/mlx5: support e-switch flow count action")
Fixes: db48f9db5d ("net/mlx5: support new flow counter API")
Fixes: 974f1e7ef1 ("net/mlx5: add new memory region support")
Fixes: 65c9d24170 ("net/mlx5: enable loopback by configured mode")
Fixes: 87011737b7 ("mlx5: add software counters")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
In the current code, on some cases the representor ethdev is using the
PF interface to query some link status information or pause parameters.
It was done because in previous kernel versions there was no support
from the kernel for the representor info.
Using the PF i/f for such ioctl is error prone and not always working
because:
* On some cases there is no PF at all, only representors (e.g Bluefield
with host representors)
* Query the up/down status from representor and link status from PF
is in-consist
* PF link is down doesn't necessarily means representor is down.
* setting different pause configuration for the PF and the
representors will result on undefined behaviour
Making the code cleaner and more robust by using only the representor
i/f for the ioctl. whatever the kernel will provide on this query will
be used. No need to do W.A. for kernel missing functionality.
Note:
1. Setting pause parameters will obviously won't work on representors
2. Old kernel will not report all the possible representor info
Fixes: 2b73026388 ("net/mlx5: probe all port representors")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Representor ports has a different set of extended statistics (as those are
logical ports which cannot count all that the PF can).
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
The current code would fail if one of the counters DPDK counters was not
found on the device counters.
As representors and PF port has different counters the both cannot work
together.
Addressing this issue by making the counter init more flexible to
contain all the counter found and skipping the error.
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
This patch fixes the issue that representor port shows xstats of PF.
Fixes: 2b73026388 ("net/mlx5: probe all port representors")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Probe existing port representors in addition to their master device and
associate them automatically.
To avoid collision between Ethernet devices, they are named as follows:
- "{DBDF}" for master/switch devices.
- "{DBDF}_representor_{rep}" with "rep" starting from 0 for port
representors.
(Patch based on prior work from Yuanhan Liu)
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
With the commit af4f09f282 ("net/mlx5: prefix all functions with mlx5"),
mlx5_xstats_get() is not compliant any longer with the api.
It always returns the caller max entries count while it should return how
many entries it wrote/wanted to write.
Fixes: af4f09f282 ("net/mlx5: prefix all functions with mlx5")
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Aligning Mellanox SPDX copyrights to a single format.
In addition replace to SPDX licence files which were missed.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This change removes the need to distinguish unlocked priv_*() functions
which are therefore renamed using a mlx5_*() prefix for consistency.
At the same time, all functions from mlx5 uses a pointer to the ETH device
instead of the one to the PMD private data.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
In priv struct only the memory region needs to be protected against
concurrent access between the control plane and the data plane.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Replaces all (void)foo; by __rte_unused macro except when variables are
under #if statements.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Several control operations implemented by these PMDs affect netdevices
through sysfs, itself subject to file system permission checks enforced by
the kernel, which limits their use for most purposes to applications
running with root privileges.
Since performing the same operations through ioctl() requires fewer
capabilities (only CAP_NET_ADMIN) and given the remaining operations are
already implemented this way, this patch standardizes on ioctl() and gets
rid of redundant code.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Extend the PMD extended statistics with more counters on the physical
port.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
mlx5_get_priv() is barely use across the driver. To avoid mixing access,
this function is definitely removed.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Simplify the computation for the needed size:
- exact size for the structure header,
- exact size for a number of 64-bit counters.
Fixes: a4193ae3bc ("net/mlx5: support extended statistics")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The current Tx error counter counts, according to its description,
the total number of packets not sent when TX ring full. It is reported
to application as part of oerrors field.
The drop due to full ring is not the statistic that should be set on
oerrors field. Such number can be counted by the application using the
return value of the Tx burst function.
The number that should be set there is the number of packets the device
could not transmit in any way, even when it has resources.
Therefore, replace this counter to count the total number of failed
transmitted packets.
Fixes: 87011737b7 ("mlx5: add software counters")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The corrupted code didn't unlock the spinlock in xstats
get and reset functions error flow.
Hence, if these errors happened, the device spinlock was
left locked and many mlx5 device functionalities were blocked.
The fix unlocks the spinlock in the missed places.
Fixes: e62bc9e706 ("net/mlx5: fix extended statistics")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Those are useless since DPDK headers have been cleaned up.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Checking whether the counter is IB counter was performed with the
wrong index.
Fixes: 859081d3fb ("net/mlx5: add out of buffer counter to extended statistic")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The number of extended statistics counters is queried through ETHTOOL.
ETHTOOL provides a different number when the link is up or down.
Since extended statistics query occurs at device start,
segmentation fault might happen when changing the link state before and
after the device start.
this commit address this issue, and query the number of statistics
before every call to ETHTOOL.
Fixes: a4193ae3bc ("net/mlx5: support extended statistics")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Interface name is queried, however never used.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This commit adds RX out of buffer counter to xstats report.
The counter counts the number of dropped occurred due to lack of buffers
on device RX queues.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
With recent gcc versions, e.g. gcc 6.1, compilation of mlx drivers with
debug enabled produces lots of errors complaining that "pedantic" is
not a warning level that can be ignored.
error: ‘-pedantic’ is not an option that controls warnings [-Werror=pragmas]
#pragma GCC diagnostic ignored "-pedantic"
^~~~~~~~~~~
These errors can be removed by changing the "-pedantic" to "-Wpedantic".
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Fixes: 771fa900b7 ("mlx5: introduce new driver for Mellanox ConnectX-4 adapters")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Secondary processes are expected to use queues and other resources
allocated by the primary, however Verbs resources can only be shared
between processes when inherited through fork().
This limitation can be worked around for TX by configuring separate queues
from secondary processes.
Signed-off-by: Or Ami <ora@mellanox.com>
A typo causes TX stats indices to be retrieved from RX queues.
Fixes: 87011737b7 ("mlx5: add software counters")
Reported-by: Nicolas Harnois <nicolas.harnois@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
