Change the vm2vm data path to batch enqueue for better performance.
Support latest async vhost API, refactor vhost async data path,
replace rte_atomicNN_xxx to __atomic_XXX and clean some codes.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add ioat ring space count and check, if ioat ring space is not enough
for the next async vhost packet enqueue, then just return to prevent
enqueue failure. Add rte_ioat_completed_ops() fail handler.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Move eth stop code from "signal_handler" function to the end of "main"
function. There are two reasons for this:
First, this improves code maintenance and makes code look simple and
clear. Based on this change, after receiving the interrupt signal,
"fdata->done" is set as 1. Then the main thread will wait all worker
lcores to jump out of the loop. Finally, the main thread will stop and
then close eth dev port.
Second, for older version, the main thread first stops eth dev port and
then waits the end of worker lcore. This may cause errors because it may
stop the eth dev port which worker lcores are using. This moving change
can fix this by waiting all worker threads to exit and then stop the
eth dev port.
In the meanwhile, remove wmb in signal_handler.
This is because when the main lcore receive the stop signal, it stores 1
into fdata->done. And then the worker lcores load "fdata->done" and jump
out of the loop to stop running. Nothing should be stored after updating
fdata->done, so the wmb is unnecessary.
Fixes: 085edac2ca ("examples/eventdev_pipeline: support Tx adapter")
Cc: stable@dpdk.org
Suggested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
When the main core is set as tx/rx/sched/worker core, it also needs to
print some information to show this. Thus, add info output for the main
core, and add a "dump" function to print core information for the sake
of code simplicity and easy maintenance.
In the meanwhile, fix the count error. For the variable "worker_idx", it
should be incremented when the core is set as worker core. However, when
the main core is set as rx/tx/sched core, the worker_idx is also
incremented. Though this error may not have a substantial impact due to
that the main core is the last launched core, but it should be corrected
from the perspective of code correctness.
Fixes: 1094ca9668 ("doc: add SW eventdev pipeline to sample app guide")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
In the case that the cores are isolated, if "-l" or "-c" parameter is not
added, the cores will not be enabled and can not launch worker function
correctly. In the meanwhile, no error information is reported.
For example:
totally CPUs:16
isolated CPUs:1-8
command: sudo gdb -args ./dpdk-eventdev_pipeline --vdev event_sw0 \
-- -r1 -t1 -e4 -w F00 -s4 -n0 -c32 -W1000 -D
cores information:
rte_config->lcore_role = {ROLE_RTE, ROLE_OFF, ROLE_OFF, ROLE_OFF,
ROLE_OFF, ROLE_OFF, ROLE_OFF, ROLE_OFF,
ROLE_OFF, ROLE_RTE, ROLE_RTE, ROLE_RTE,
ROLE_RTE, ROLE_RTE, ROLE_RTE, ROLE_RTE}
output information:
...
[main()] lcore 9 executing worker, using eventdev port 0
[main()] lcore 10 executing worker, using eventdev port 1
[main()] lcore 11 executing worker, using eventdev port 2
This is because "RTE_LCORE_FOREACH_WORKER" chooses the enabled core. In
the case that the cores are isolated, "the lcore_role" flag of isolated
cores are set as "ROLE_OFF" by default(not enabled). So if we choose
these isolated cores as workers, "RTE_LCORE_FOREACH_WORKER" will ignore
these cores and not launch worker functions on them.
To fix this, add "-l" parameters to doc and add lcore enabled check.
Fixes: 1094ca9668 ("doc: add SW eventdev pipeline to sample app guide")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Add PMD power management feature support to l3fwd-power sample app.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
re-organise the including of the new public header file and
remove un-needed includes
Fixes: 210c383e24 ("power: packet format for vm power management")
Fixes: cd0d5547e8 ("power: vm communication channels in guest")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Rename the #defines to have an RTE_POWER_ prefix
Fixes: 210c383e24 ("power: packet format for vm power management")
Fixes: cd0d5547e8 ("power: vm communication channels in guest")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Rename the public structs to have an rte_power_ prefix.
Fixes: 210c383e24 ("power: packet format for vm power management")
Fixes: cd0d5547e8 ("power: vm communication channels in guest")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In preparation for making the header file public, we first rename
channel_commands.h as rte_power_guest_channel.h.
Fixes: 210c383e24 ("power: packet format for vm power management")
Fixes: cd0d5547e8 ("power: vm communication channels in guest")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
When vm_power_manager is started, it takes over power management on
all cores. This should be limited to cores defined in the core mask.
When initialising, if a core is not on the coremask, skip it.
Applies to both initialisation and exit.
Signed-off-by: David Hunt <david.hunt@intel.com>
Meson can use cmake as a fallback for detecting packages, and this can
lead to picking up 64-libs for 32-bit builds. To work around this, force
the use of pkg-config only for detecting libcrypto, zlib, jansson and
other package dependencies.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Liron Himi <lironh@marvell.com>
Tested-by: Lee Daly <lee.daly@intel.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Martin Spinler <spinler@cesnet.cz>
This python script provides a shebang that only makes sense if the
script has the executable bit set.
Fixes: fde7a77270 ("examples/pipeline: add VXLAN encapsulation example")
Cc: stable@dpdk.org
Reported-by: Timothy Redaelli <tredaelli@redhat.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
In l3fwd no of transmit queues is calculated based on no of
lcores with which it is launched. Hence maximum no of tx
queues possible per port should depend on RTE_MAX_LCORE value.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Async enqueue offloads large copies to DMA devices, and small copies
are still performed by the CPU. However, it requires users to get
enqueue completed packets by rte_vhost_poll_enqueue_completed(), even
if they are completed by the CPU when rte_vhost_submit_enqueue_burst()
returns. This design incurs extra overheads of tracking completed
pktmbufs and function calls, thus degrading performance on small packets.
This patch enhances async enqueue for small packets by enabling
rte_vhost_submit_enqueue_burst() to return completed packets.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The --export-dynamic linker option is only applicable to ELF.
On Windows, where COFF is used, it causes warnings:
x86_64-w64-mingw32-ld: warning: --export-dynamic is not supported
for PE+ targets, did you mean --export-all-symbols? (MinGW)
LINK : warning LNK4044: unrecognized option '/-export-dynamic';
ignored (clang)
Don't add --export-dynamic on Windows anywhere.
Fixes: b031e13d7f ("build: fix plugin load on static build")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Simply replace the rte_smp_mb barriers with SEQ_CST atomic thread fence,
if there is no load/store operations.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Use C11 atomic APIs with one-way barriers to replace two-way
barriers when operating enqueue/dequeue. Used->idx and avail->idx
are the synchronization points for split vring.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When dpdk is compiled as static libraries, it is not possible
to load a plugin from an application. We get the following error:
EAL: librte_pmd_xxxx.so: undefined symbol: per_lcore__rte_errno
This happens because the dpdk symbols are not exported. Add them to the
dynamic symbol table by using '-Wl,--export-dynamic'. This option was
previously present when compiled with Makefiles, it was introduced in
commit f9a08f6502 ("eal: add support for shared object drivers")
Also add it to the pkg-config file.
Fixes: 16ade738fd ("app/testpmd: build with meson")
Fixes: 89f0711f9d ("examples: build some samples with meson")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
l3fwd-power uses `--parse-ptype' parameter to query egress packets
type. Before that feature is enabled l3fwd-power verifies PMD ability
to advertise supported packet types with
rte_eth_dev_get_supported_ptypes().
The above ethdev function API contains this note:
"
Better to invoke this API after the device is already started or rx burst
function is decided, to obtain correct supported ptypes.
"
The patch updates code for PMDs that register supported types after
dev_start.
Fixes: 82bea46616 ("examples/l3fwd-power: add --parse-ptype option")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
The makefiles for some of the multi_process example files were missing
SPDX license headers, so add them. These Makefiles completely replaced
the older makefiles and were written from scratch, not based on previous
versions, so add a new copyright year on them.
Fixes: 13abe17c3c ("examples/multi_process: convert to pkg-config-based build")
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Replace -w / --pci-whitelist with -a / --allow options
and --pci-blacklist with --block.
The -b short option remains unchanged.
Allow the old options for now, but print a nag
warning since old options are deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Before make removal, those examples were built with experimental flag
for tracepoints to be compiled in but the pkg-config part of those
makefiles were missed.
Fixes: 78d44153de ("ethdev: add tracepoints")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This example is missing the experimental flag since it uses an
experimental API.
Fixes: cd1dadeb9b ("examples/rxtx_callbacks: support HW timestamp")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
vhost_blk.c: In function ‘ctrlr_worker’:
vhost_blk.c:543:2: warning: implicit declaration of function ‘CPU_ZERO’
[-Wimplicit-function-declaration]
543 | CPU_ZERO(&cpuset);
| ^~~~~~~~
vhost_blk.c:544:2: warning: implicit declaration of function ‘CPU_SET’
[-Wimplicit-function-declaration]
544 | CPU_SET(0, &cpuset);
| ^~~~~~~
vhost_blk.c:545:2: warning: implicit declaration of function
‘pthread_setaffinity_np’ [-Wimplicit-function-declaration]
545 | pthread_setaffinity_np(thread, sizeof(cpu_set_t), &cpuset);
| ^~~~~~~~~~~~~~~~~~~~~~
/usr/bin/ld: /tmp/cczpiMWH.o: in function `ctrlr_worker':
vhost_blk.c:(.text+0x1076): undefined reference to `CPU_ZERO'
/usr/bin/ld: vhost_blk.c:(.text+0x1082): undefined reference to
`CPU_SET'
collect2: error: ld returned 1 exit status
gmake: *** [Makefile:34: build/vhost-blk-shared] Error 1
Explicitly pass _GNU_SOURCE and include missing headers (rather than
rely on automagic inclusion from other system headers).
Fixes: c19beb3f38 ("examples/vhost_blk: introduce vhost storage sample")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
main.c: In function ‘lthread_tx’:
main.c:2091:25: error: implicit declaration of function ‘sched_getcpu’;
did you mean ‘sched_getparam’? [-Werror=implicit-function-declaration]
2091 | tx_conf->conf.cpu_id = sched_getcpu();
| ^~~~~~~~~~~~
| sched_getparam
cc1: all warnings being treated as errors
Explicitly pass _GNU_SOURCE and include missing header (rather than
rely on automagic inclusion from other system headers).
Fixes: d48415e1fe ("examples/performance-thread: add l3fwd-thread app")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
When introducing this example, the cleanup from commit 7e9562a107
("examples: fix make clean when using pkg-config") was missed.
Fixes: c5eebf85ba ("examples/ntb: add example for NTB")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This example missed the fixes from commit 69b1bb49ed
("examples: hide error for missing pkg-config path flag") and
commit 12a652a02b ("examples: fix build with old pkg-config").
Fixes: 08bd1a1744 ("examples/l3fwd-graph: add graph-based l3fwd skeleton")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
This example missed the rework from commit 8549295db0
("build/pkg-config: improve static linking flags").
Fixes: 08bd1a1744 ("examples/l3fwd-graph: add graph-based l3fwd skeleton")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Two issues fixed here.
First add the experimental flag.
Then fix a link issue with the crypto scheduler driver:
/usr/bin/ld: /tmp/cchr7aHA.o: in function `main':
main.c:(.text.startup+0x1673): undefined reference to
`rte_cryptodev_scheduler_workers_get'
collect2: error: ld returned 1 exit status
Fixes: e3bcb99a5e ("examples/l2fwd-crypto: limit number of sessions")
Fixes: 261bbff75e ("examples: use separate crypto session mempools")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
rm -f build/kni build/kni-static build/kni-shared
test -d build && rmdir -p build || true
[...]
/usr/bin/ld: /tmp/cc72ssnK.o: undefined reference to symbol
'pthread_join@@GLIBC_2.2.5'
This example explicitly call pthread API and should be linked against
the pthread library.
Fixes: 724beb913b ("examples/kni: monitor and update link state continually")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
flow.c: In function ‘parse_flow_tokens’:
flow.c:153:23: error: taking address of packed member of ‘struct
rte_ipv4_hdr’ may result in an unaligned pointer value
[-Werror=address-of-packed-member]
153 | if (ipv4_addr_cpy(&rule->ipv4.spec.hdr.src_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
flow.c:154:9: error: taking address of packed member of ‘struct
rte_ipv4_hdr’ may result in an unaligned pointer value
[-Werror=address-of-packed-member]
154 | &rule->ipv4.mask.hdr.src_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
flow.c:170:23: error: taking address of packed member of ‘struct
rte_ipv4_hdr’ may result in an unaligned pointer value
[-Werror=address-of-packed-member]
170 | if (ipv4_addr_cpy(&rule->ipv4.spec.hdr.dst_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
flow.c:171:9: error: taking address of packed member of ‘struct
rte_ipv4_hdr’ may result in an unaligned pointer value
[-Werror=address-of-packed-member]
171 | &rule->ipv4.mask.hdr.dst_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Meson build is fine since we waive those warnings.
Replicate it for make.
Fixes: 8e693616fc ("examples/ipsec-secgw: enable flow based distribution")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When this example started using rte_cryptodev_sym_session_pool_create,
the part for pkg-config builds was not updated.
Fixes: 261bbff75e ("examples: use separate crypto session mempools")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fix vhost-switch compiling issue when ioat dependency is missing.
Change 'RTE_x86' check into 'RTE_RAW_IOAT' check in meson build file.
Use 'RTE_RAW_IOAT' to control conditional compiling in source file.
Clean some codes.
Fixes: abec60e711 ("examples/vhost: support vhost async data path")
Fixes: 3a04ecb214 ("examples/vhost: add async vhost args parsing")
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Add new line character(\n) in the usage of vhost_crypto example for
better readability
Fixes: 709521f4c2 ("examples/vhost_crypto: support multi-core")
Cc: stable@dpdk.org
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The short option written for interactive mode is --i in usage of
this qos_sched example. Actually, it is -i.
Fixes: cfd5c971e5 ("examples/qos_sched: add stats")
Cc: stable@dpdk.org
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Once it has been determined that an example cannot be built, there is
little point in continuing to process the meson.build file for that
example, so we can use subdir_done() to return to the calling file.
This can potentially prevent problems where later statement in the file
may cause an error on systems where the app cannot be built, e.g. on
Windows or FreeBSD.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When librt is not present on a system, processing the meson.build file
for this example application causes an error. Make the library
non-mandatory and just mark the example as unbuildable if it is
not present.
Fixes: 89f0711f9d ("examples: build some samples with meson")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
By installing the examples one-by-one in a loop in the examples
meson.build file we effectively flattened out the structure of the examples
folder and omitted some common and shared subfolders that were never
directly built. Instead, we can remove the loop and just have the whole
"examples" folder installed as-is in a single statement, preserving its
directory structure, and thereby fixing the build of a number of the
examples.
Fixes: 2daf565f91 ("examples: install as part of ninja install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
cmdline_numtype member names clash with Windows system identifiers.
Add RTE_ prefix to cmdline constants to avoid this and possible
future conflicts.
Suggested-by: Ranjit Menon <ranjit.menon@intel.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Tested-by: Jie Zhou <jizh@microsoft.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch is to implement vhost DMA operation callbacks for CBDMA
PMD and add vhost async data-path in vhost sample. With providing
callback implementation for CBDMA, vswitch can leverage IOAT to
accelerate vhost async data-path.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch is to add async vhost driver arguments parsing function
for CBDMA channel, DMA initiation function and args description.
The meson build file is changed to fix dependency problem. With
these arguments vhost device can be set to use CBDMA or CPU for
enqueue operation and bind vhost device with specific CBDMA channel
to accelerate data copy.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Creation of a session mempool may fail in the case of a single lcore
and a low number of SA.
In case when there is only one lcore and number of configures SA less
then (0.5 * CDEV_MP_CACHE_SZ) then creation of the mempool fails with
EINVAL. This is because the number of requested items is less than
(cache size * CDEV_MP_CACHE_MULTIPLIER).
Hence, the number of elements in mempool is increased in such cases.
Fixes: e30b2833c4 ("security: update session create API")
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch fixes FIPS GCM test of the redundant plaintext string
write and insufficient test case support check for some corner
cases.
Fixes: d09abf2d10 ("examples/fips_validation: update GCM test")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch fixes the missing version line in the response file.
Fixes: 7936501840 ("examples/fips_validation: fix version compatibility")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
