This 2.5s delay doesn't seem to serve any purpose other than a being a
pause after logging the device configuration.
Fixes: 540a211084 ("bnx2x: driver core")
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Harish Patil <harish.patil@qlogic.com>
ELINK_INCLUDE_EMUL and ELINK_INCLUDE_FPGA are never defined. Remove them
along with enumeration constants dependent on their inclusion.
Fixes: 540a211084 ("bnx2x: driver core")
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Harish Patil <harish.patil@qlogic.com>
Correctly hint the cache line size. Remove unused macros associated
with the cache line size.
Fixes: 540a211084 ("bnx2x: driver core")
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Harish Patil <harish.patil@qlogic.com>
mlx5_rx_queue_setup() was setting the Rx function by itself instead of
using priv_select_rx_function() written for that purpose.
Fixes: cdab90cb5c ("net/mlx5: add Tx/Rx burst function selection wrapper")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Enic is capable of recognizing packets to be delivered to the
app with single VLAN tags. Advertise this with the ptype
RTE_PTYPE_L2_ETHER_VLAN and set the ptype for VLAN packets.
Signed-off-by: John Daley <johndale@cisco.com>
Some(?) compilers will treat the unmarked constant 1 as a 32-bit
integer, but the shift operation is in a loop that could run up to
63 times -- undefined behavior!
Coverity issue: 127546
Fixes: 778b759ba1 ("net/bnxt: add MAC address")
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Otherwise, the inherent cast when multiplying entry_length by max_vnics
in the call to rte_memzone_reserve could promote max_vnics to a signed
value, causing hilarity to ensue...
Coverity issue: 127557
Fixes: 9738793f28 ("net/bnxt: add VNIC functions and structs")
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use sizeof dest rather than sizeof src for limiting copy length,
and replace strncpy with snprintf to ensure NULL termination.
Coverity issue: 127795
Fixes: 372c1af5ed ("net/ena: add dedicated memory area for extra device info")
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When the DMA allocation routine is invoked in the context of a non-EAL
thread, the API rte_lcore_id() returns -1 and indexing on that in
rte_lcore_to_socket_id() leads to segfault. The fix is to use
SOCKET_ID_ANY as the socket_id for all slowpath memory allocation.
Fixes: 540a211084 ("bnx2x: driver core")
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Fix the max number of PF rx/tx queues. Set the value based
on BNX2X_MAX_RSS_COUNT() rather than hard coding it to 128.
Fixes: 540a211084 ("bnx2x: driver core")
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Acked-by: Chas Williams <3chas3@gmail.com>
1300 series Cisco adapter firmware version 2.0(13) for UCS
C-series servers and 3.1(2) for blade servers supports more
filtering capabilities. The feature can be enabled via Cisco
CIMC or USCM with the 'advanced filters' radio button. When
enabled, the these additional flow director modes are available:
RTE_ETH_FLOW_NONFRAG_IPV4_OTHER
RTE_ETH_FLOW_NONFRAG_IPV4_SCTP
RTE_ETH_FLOW_NONFRAG_IPV6_UDP
RTE_ETH_FLOW_NONFRAG_IPV6_TCP
RTE_ETH_FLOW_NONFRAG_IPV6_SCTP
RTE_ETH_FLOW_NONFRAG_IPV6_OTHER
Changes:
- Detect and set an 'advanced filters' flag dependent on the adapter
capability.
- Implement RTE_ETH_FILTER_INFO filter op to return the flow types
available dependent on whether advanced filters are enabled.
- Use a function pointer to select how filters are added to the adapter:
copy_fltr_v1() for older firmware/adapters or copy_fltr_v2() for
adapters which support advanced filters.
- Apply fdir global masks to filters when in advanced filter mode.
- Update documentation.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Update the VIC adapter file which is common with the firmware and
other VIC drivers. This is needed to support new capabilities
for 1300 adapters, including advanced filtering, which is available
in VIC firmware version 2.0(13) for UCS rack and 3.1(2).
Signed-off-by: John Daley <johndale@cisco.com>
When flow director filters where removed when an enic device is
stopped, the filters were freed but the pointer was not set to
NULL so the next stop would try to free them again.
Fixes: fefed3d1e6 ("enic: new driver")
Signed-off-by: John Daley <johndale@cisco.com>
The wrong queue id was being used in the enic
flow director code after the scattered Rx feature
was added.
Fixes: 856d7ba7ed ("net/enic: support scattered Rx")
Signed-off-by: John Daley <johndale@cisco.com>
Update the enic guide to better explain how to setup vNIC parameters
on the Cisco VIC since the introduction of rx scatter, and print an
error message for the case of having 1 RQ configured in the vNIC,
referring to the documentation for more information.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Summary:
- add secondary qset support in device stats
- add support for releasing mbufs from RBDR for >8 queues
- add support for releasing mbufs from RX queues for >8 queues
- support >8 queues in tx_queue_setup
- support >8 queues in rx_queue_setup
- support up to 96 queues per device (dev_info->max_rx_queues)
- add secondary qset support in rbdr_rte_mempool_get
- support >8 queues in multiprocess mode (do not reconfigure VFs)
- setup periodic alarm accordingly for type of VFs:
* primary VF - handle events on queues and link status
* secondary VF - handle events on queues
- initialize hardware capabilities in secondary qsets
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
In case of the multiprocess mode a shared nicvf struct between processes
cannot point with the eth_dev pointer to master device, therefore remove it
along with references to it refactoring the code where needed.
This change fixes multiprocess issues detected in stats.
Fixes: 7413feee66 ("net/thunderx: add device start/stop and close")
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Changes:
- add new message sqs_alloc in mailbox
- add a queue container to hold secondary qsets.
- add nicvf_mbox_request_sqs
- handle new mailbox messages for secondary queue set support
- register secondary queue sets for further reuse
- register the number secondary queue sets in MSG_QS_CFG
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This interface (nicvf_bsvf) will be used for secondary queue set support.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The symbols PKT_TX_TCP_CKSUM and PKT_TX_UDP_CKSUM are not bits on a
bitmask. Set l3_offset always for TX offloads, not just for PKT_TX_IP_CKSUM
being true.
Fixes: 1c421f18e0 ("net/thunderx: add single and multi-segment Tx")
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Decode the checksum flags from the Rx descriptor, setting
the appropriate bit in the mbuf ol_flags field when the flag
indicates a bad checksum.
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The ptype is decoded from the Rx descriptor and stored
in the packet type field in the mbuf using the same function
in the non-vector driver.
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
SR-IOV virtual functions cannot rely on promiscuous mode for the reception
of VLAN tagged frames. Program the VLAN filter for each slave when a
VLAN is configured for the bonding master.
Signed-off-by: Eric Kinzie <ehkinzie@gmail.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
It's possible for the bonding driver to mistakenly reject an interface
based in it's, as yet, unnegotiated link speed and duplex. Always allow
the interface to be added to the bonding interface but require link
properties validation to succeed before slave is activated.
Fixes: 2efb58cbab ("bond: new link bonding library")
Signed-off-by: Eric Kinzie <ehkinzie@gmail.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add the ability to reset the virtio device in the configure callback
if the features flag changed since previous reset. This will be possible
with the introduction of offload support in next commits.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Move the configuration of control queue in the configure callback.
This is needed by next commit, which introduces the reinitialization
of the device in the configure callback to change the feature flags.
Therefore, the control queue will have to be restarted at the same
place.
As virtio_dev_cq_queue_setup() is called from a place where
config->max_virtqueue_pairs is not available, we need to store this in
the private structure. It replaces max_rx_queues and max_tx_queues which
have the same value. The log showing the value of max_rx_queues and
max_tx_queues is also removed since config->max_virtqueue_pairs is
already displayed above.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Move all code related to device initialization in a new function
virtio_init_device().
This commit brings no functional change, it prepares the next commits
that will add the offload support. For that, it will be needed to
reinitialize the device from ethdev->configure(), using this new
function.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add an option, dequeue-zero-copy, to enable this feature in vhost-pmd.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Negotiate VIRTIO_F_IOMMU_PLATFORM to have IOMMU support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add modern device id and rename VIRTIO_PCI_DEVICEID_MIN to
VIRTIO_PCI_LEGACY_DEVICEID_NET. While at it, remove unused macros too.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The driver name has been lost with the eal rework.
Restore it.
Fixes: c830cb2954 ("drivers: use PCI registration macro")
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Virtio interfaces do not currently allow the user to specify a particular
Maximum Transmission Unit (MTU). Consequently, the MTU of Virtio interfaces
is typically set to the Ethernet default value of 1500.
This is problematic in the case of cloud deployments, in which a specific
(and potentially non-standard) MTU needs to be set by a DHCP server, which
needs to be honored by all interfaces across the traffic path.To acheive
this Virtio interfaces should support setting of MTU.
In case when GRE/VXLAN tunneling is used for internal communication, there
will be an overhead added by the infrastructure in the packet over and
above the ETHER MTU of 1518. So to take care of this overhead in these
cases the DHCP server corrects the L3 MTU to 1454. But since virtio
interfaces was not having the MTU set functionality that MTU sent by the
DHCP server was ignored and the instance will still send packets with 1500
MTU which after encapsulation will become more than 1518 and eventually
gets dropped in the infrastructure.
By adding an additional 'set_mtu' function to the Virtio driver, we can
honor the MTU sent by the DHCP server. The dhcp server/controller can
then leverage this 'set_mtu' functionality to resolve the above
mentioned issue of packets getting dropped due to incorrect size.
Signed-off-by: Souvik Dey <sodey@sonusnet.com>
Reviewed-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
To enable Tx side offload on tunneling packet, driver should set
correct tunneling parameters: (1) EIPT, External IP header type;
(2) EIPLEN, External IP; (3) L4TUNT; (4) L4TUNLEN. This parsing
behavior is based on (ol_flag & PKT_TX_TUNNEL_MASK). And when
it's a tunneling packet, MACLEN defines the outer L2 header.
Also, we define TSO on each kind of tunneling type as a capabilities.
Now only i40e declares to support them.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Inline with PCI probe and remove, VDEV probe and remove hooks provide
a uniform naming.
PCI probe represents scan and driver initialization. For VDEV, it will
represent argument parsing and initialization.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Update the PMD to use the 1.5.1 HWRM API.
Most of the changes in the patch are white spaces and rearrangement of the
lines - a onetime change owing to the usage of a different auto generated
file.
Structures updated:
hwrm_stat_ctx_alloc_input, hwrm_stat_ctx_alloc_output,
hwrm_stat_ctx_free_input, hwrm_stat_ctx_free_output,
hwrm_stat_ctx_clr_stats_input, hwrm_stat_ctx_clr_stats_output,
hwrm_exec_fwd_resp_input, hwrm_exec_fwd_resp_output
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
