Add support to set supported ptypes for octeontx2 and
remove devarg scheme to disable ptype parsing support as
application can use rte_eth_dev_set_ptypes() normative API
to enable the same use case.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
System DPI Packet Interface Unit (SDP) is a co-processor
of OCTEON TX2 which provides PCIe endpoint support for a
remote host to DMA packets into and out of the OCTEON TX2 SoC.
SDP interface comes in to live only when it is connected in
EP mode. It exposes input and output queue pairs to remote host
for instruction input and packet output. It can be used as
a communication channel between remote host and OCTEON TX2.
Host machine needs to use corresponding user/kernel mode
driver to communicate with SDP interface on OCTEON TX2 SoC.
SDP interface support is limited to SDP PF device now.
No SDP VF support.
Signed-off-by: Subrahmanyam Nilla <snilla@marvell.com>
Signed-off-by: Venkateshwarlu Nalla <venkatn@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding support to parse higig2 header in RTE flow for octeontx2.
And added devargs to configure port for higig2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding support to configure specific switch types like high2 and dsa
on a port. When this switch type is configured, it is expected that
all the traffic on that port should be of specific type only.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding support to parse GRE KEY for octeontx2 Flow.
Matching on GRE Key will only work, if checksum and routing
bits in the GRE header are equal to 0.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding support for ipv6_ext header parsing in the octeontx2 flow.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding PF and VF action support for octeontx2 flow driver.
If RTE_FLOW_ACTION_TYPE_PF action is set from VF, then the packet
will be sent to the parent PF.
If RTE_FLOW_ACTION_TYPE_VF action is set and original is specified,
then the packet will be sent to the original VF, otherwise the packet
will be sent to the VF specified in the vf_id.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch implements rx interrupts feature required for power
saving. These interrupts can be enabled/disabled on demand.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add MTU set operation and MTU update feature.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add device start operation and update the correct
function pointers for Rx and Tx burst functions.
This patch also update the octeontx2 NIC specific documentation.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add vector version of packet Receive function.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Support setting up VLAN filters so as to allow tagged
packet's reception after VLAN HW Filter offload is enabled.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support configuring VLAN offloads for an ethernet device and
dynamic promiscuous mode configuration for VLAN filters where
filters are updated according to promiscuous mode of the device.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add flow control operations and exposed
otx2_nix_update_flow_ctrl_mode() to enable on the
configured mode in dev_start().
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
The fields from CQE needs to be converted to
ptype and rx ol flags in mbuf. This patch adds
create lookup memory for those items to be
used in Fastpath.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Add RSS support and expose RSS related functions
to implement RSS action for rte_flow driver.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Add unicast MAC filter for PF device and
update the respective feature list.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add promiscuous and allmulticast mode for PF devices and
update the respective feature list.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add basic stat operation and updated the feature list.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add link stats related operations and mark respective
items in the documentation.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for octeontx2 PMD.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
