Add optional destination ports parameter for port-id action.
The parameter is not must, and the value is 1 by default as before
if the parameter not provided.
For example:
$ dpdk-test-flow-perf -w 08:00.0,representor=[0,1] -- --transfer \
--ingress --transfer --ether --portmask=0x2 --vxlan-encap \
--port-id=0
This command means the rule created on representor 0 with port 0
as destination, since the portmask is 0x2 and dst-ports is 0:
$ dpdk-test-flow-perf -w 08:00.0,representor=[0,1] \
-w 08:00.1,representor=[0,1]-- --transfer --ingress --transfer \
--ether --portmask=0x12 --vxlan-encap --port-id=0,3
This command means the rules created on both representor 0 of PF 0
and PF 1, the destination port for the first representor is PF 0,
and the destination port for the other one is PF 1.
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Reviewed-by: Wisam Jaddo <wisamm@nvidia.com>
rte_bpf_convert() implementation depends on libpcap.
Right now it is defined only when this library is installed and
RTE_PORT_PCAP is defined.
Fix that by providing for such case stub rte_bpf_convert()
implementation that will always return an error.
To draw user attention, if proper implementation is disabled,
warning will be thrown at meson configure stage.
Also move stub for another function (rte_bpf_elf_load) into
the same place (bpf_stub.c).
Fixes: 2eccf6afbea9 ("bpf: add function to convert classic BPF to DPDK BPF")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Implement PIE based congestion management based on rfc8033.
The Proportional Integral Controller Enhanced (PIE) algorithm works
by proactively dropping packets randomly.
PIE is implemented as more advanced queue management is required to
address the bufferbloat problem and provide desirable quality of
service to users.
Tests for PIE code added to test application.
Added PIE related information to documentation.
Signed-off-by: Wojciech Liguzinski <wojciechx.liguzinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
This patch adds a new parameter to the FIB configuration to specify
the size of the extension for internal RIB structure.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>
Seen by ASan.
In the external buffer mbuf test, we check that the buffer is freed
by checking that its refcount is 0.
This is not a valid condition, because it accesses to an already
freed area.
Fix this by setting a boolean flag in the callback when rte_free()
is actually called, and check this flag instead.
Bugzilla ID: 867
Fixes: 7b295dceea07 ("test/mbuf: add unit test cases")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This patch adds performance tests for the following Toeplitz hash
function implementations:
Scalar:
- rte_softrss()
- rte_softrss_be()
Vector using gfni:
- rte_thash_gfni()
- rte_thash_gfni_bulk()
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
This patch adds a bulk version for the Toeplitz hash implemented
with Galios Fields New Instructions (GFNI).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch add a new Toeplitz hash implementation using
Galios Fields New Instructions (GFNI).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Amount of locked memory for regular users is limited,
it is usually 64 KB by default.
Hitting this limit in rte_mempool_populate_anon()
resulted in not populating the mempool, and a test case failure:
EAL: Test assert test_mempool_events line 585 failed: Failed to populate mempool empty1: Success
test failed at test_mempool():1019
Test Failed
Decrease the amount of mapped anonymous memory to fit the limit.
While there, make all function-local constants lowercase.
Fixes: 11541c5c81dd ("mempool: add non-IO flag")
Reported-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
FreeBSD EAL does not implement rte_mem_virt2iova() causing an error:
EAL: Test assert test_mempool_flag_non_io_unset_when_populated_with_valid_iova
line 781 failed: Cannot get IOVA
test failed at test_mempool():1030
Test Failed
Change unit test to use rte_memzone_reserve() to allocate memory,
which allows to obtain IOVA directly.
Bugzilla ID: 863
Fixes: 11541c5c81dd ("mempool: add non-IO flag")
Reported-by: Yu Jiang <yux.jiang@intel.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
(bitratestats_autotest|latencystats_autotest|pdump_autotest) tests
generate a log of error messages like that:
test_packet_forward() line 104: Error sending packet to port 0
Send pkts Failed
These tests use of app/test/sample_packet_forward.* code.
This code creates a portid from a ring, but doesn't properly
configure/start it.
The fix adds code to configure/start given port before usage.
Fixes: 7a0935239b9e ("ethdev: make fast-path functions to use new flat array")
Fixes: a52966cd48fd ("test: add helpers using ring PMD Rx/Tx")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Some options are needed in the runtime many times, so leaving
it during compilation is not correct. As a result some options
has been exported into command line options to be used at run
time.
The options exported are:
--txq=N
--rxq=N
--txd=N
--rxd=N
--mbuf-size=N
--mbuf-cache-size=N
--total-mbuf-count=N
Signed-off-by: Wisam Jaddo <wisamm@nvidia.com>
Reviewed-by: Alexander Kozyrev <akozyrev@nvidia.com>
Add a testcase to test launching of control threads.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Updating the interrupt testsuite to make use of interrupt
handle get set APIs.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
wrk_cmd variable is used to signal the worker thread to start
or stop the stress test loop. Relaxed barriers are used
to achieve the same.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
When mempool had been created with RTE_MEMPOOL_F_NO_IOVA_CONTIG flag
but later populated with valid IOVA, RTE_MEMPOOL_F_NON_IO was unset,
while it should be kept. The unit test did not catch this
because rte_mempool_populate_default() it used was populating
with RTE_BAD_IOVA.
Keep setting RTE_MEMPOOL_NON_IO at an empty mempool creation
and add an assert for it in the unit test (remove the separate case).
Do not reset the flag if RTE_MEMPOOL_F_ON_IOVA_CONTIG is set.
Fixes: 11541c5c81dd ("mempool: add non-IO flag")
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In layer argument test function, kvargs are parsed and checked without
free. This patch calls rte_kvargs_free() function to avoid memory leak.
Coverity issue: 373631
Fixes: a4975cd20dca ("test: add devargs test cases")
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
The flags PKT_TX_VLAN_PKT and PKT_TX_QINQ_PKT are
marked as deprecated since commit 380a7aab1ae2 ("mbuf: rename deprecated
VLAN flags") (2017). But they were not using the RTE_DEPRECATED
macro, because it did not exist at this time. Add it, and replace
usage of these flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
An autotest is added for the new chacha20_poly1305 PMD.
A new test case is also added for SGL test.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add extra ZUC-EIA3-256 and ZUC-EEA3-256 test vectors.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Check for auth parameters in the transform to verify if a test case is
supported by the crypto device under test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Check for cipher parameters in the transform to verify if a test case
is supported by the crypto device under test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
link bounding auto-test internally creates emulated ethdev.
Some tests change Rx/Tx functions of this emulated device on the fly:
by directly modifying rte_eth_dev fields and without doing stop/start
for these devices.
As now ethdev uses rte_eth_fp_ops[] for fast-path functions, these
direct changes doesn't make expected effect.
Fix the problem by guarding fast-path functions changes with
rte_eth_dev_stop()/rte_eth_dev_start().
Fixes: 7a0935239b9e ("ethdev: make fast-path functions to use new flat array")
Reported-by: Lewei Yang <leweix.yang@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
RX/TX functions (rte_eth_rx_burst/rte_eth_tx_burst) get 'nb_pkts'
argument, which specifies the maximum number to receive/transmit.
It can be 0..nb_pkts, meaning nb_pkts+1 options.
Testpmd can provide statistics of the burst sizes ('set
record-burst-stats on') by incrementing an array cell of index
<burst-size>. This array is mistakenly [MAX_PKT_BURST] size. Receiving
the maximum burst will cause out of bound write.
Enlarge the spread stats array by one cell to fix it.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Eli Britstein <elibr@nvidia.com>
Reviewed-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
To support shared Rx queue, this patch introduces dedicate forwarding
engine. The engine groups received packets by mbuf->port into sub-group,
updates stream statistics and simply frees packets.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Shared Rx queue must be polled on same core. This patch checks and stops
forwarding if shared RxQ being scheduled on multiple
cores.
It's suggested to use same number of Rx queues and polling cores.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
In case of shared Rx queue, source port mbuf from polling result isn't
the Rx port of forwarding stream. To provide original port ID, this
patch dumps mbuf->port for each packet in verbose mode if shared Rx
queue enabled.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Adds "--rxq-share=X" parameter to enable shared RxQ.
Rx queue is shared if device supports, otherwise fallback to standard
RxQ.
Shared Rx queues are grouped per X ports. X defaults to UINT32_MAX,
implies all ports join share group 1. Queue ID is mapped equally with
shared Rx queue ID.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Dump device capability and Rx domain ID if shared Rx queue is supported
by device.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for test-pmd to parse protocol pattern L2TPv2 and PPP.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Malloc cl in the cmdline_stdin_new function, so release in the
cmdline_stdin_exit function is logical, so that cl will not be
released alone.
Fixes: af75078fece3 ("first public release")
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Reviewed-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Zhihong Peng <zhihongx.peng@intel.com>
Hide struct rdline definition and some RDLINE_* constants in order
to be able to change internal buffer sizes transparently to the user.
Add new functions:
* rdline_new(): allocate and initialize struct rdline.
This function replaces rdline_init() and takes an extra parameter:
opaque user data for the callbacks.
* rdline_free(): deallocate struct rdline.
* rdline_get_history_buffer_size(): for use in tests.
* rdline_get_opaque(): to obtain user data in callback functions.
Remove rdline_init() function from library headers and export list,
because using it requires the knowledge of sizeof(struct rdline).
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
This is a new packet capture application to replace existing pdump.
The new application works like Wireshark dumpcap program and supports
the pdump API features.
It is not complete yet some features such as filtering are not implemented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The pcap library emits classic BPF (32 bit) and is useful for
creating filter programs. The DPDK BPF library only implements
extended BPF (eBPF). Add an function to convert from old to
new.
The rte_bpf_convert function uses rte_malloc to put the resulting
program in hugepage shared memory so it can be passed from a
secondary process to a primary process.
The code to convert was originally done as part of the Linux
kernel implementation then converted to a userspace program.
See https://github.com/tklauser/filter2xdp
Both authors have agreed that it is allowable to create a modified
version of this code and license it with BSD license used by DPDK.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The BPF autotest is defined but not run automatically.
Since it is short, it should be added to the autotest suite.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Simple unit test that created pcapng file using API.
To run this test you need to have at least one device.
For example:
DPDK_TEST=pcapng_autotest ./build/app/test/dpdk-test -l 0-15 \
--no-huge -m 2048 --vdev=net_tap,iface=dummy
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No need to expose rte_dma_devices out of the dmadev library.
Existing helpers should be enough, and inlines make use of
rte_dma_fp_objs.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
This commit adds producer, worker and consumer port hints for the
test-eventdev application performance tests.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Introduce a new command line option prod_enq_burst_sz
to set burst size for eventdev enqueue at producer in perf_queue
test. The newly added function perf_producer_burst is called when
prod_enq_burst_sz is greater than 1.
Signed-off-by: Rashmi Shetty <rashmi.shetty@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Before this commit, a Control^C exit of the test-eventdev application
would print the worker packet percentages, and leave the terminal with
a green colour despite the colour reset being issued after the newline.
By moving the colour reset command before the \n the issue is fixed.
Fixes: 6b1a14a83a06 ("app/eventdev: add packet distribution logs")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Added per queue buffer. To configure per queue event buffer size,
application sets rte_event_eth_rx_adapter_params::use_queue_event_buf
flag as true while using rte_event_eth_rx_adapter_create_with_params().
The per queue event buffer size is populated in
rte_event_eth_rx_adapter_queue_conf::event_buf_size and passed
to rte_event_eth_rx_adapter_queue_add().
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Currently event buffer is static array with a default size defined
internally.
To configure event buffer size from application,
rte_event_eth_rx_adapter_create_with_params() API is added which
takes struct rte_event_eth_rx_adapter_params to configure event
buffer size in addition other params. The event buffer size is
rounded up for better buffer utilization and performance. In case
of NULL params argument, default event buffer size is used.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added rte_event_eth_rx_adapter_queue_conf_get() API to get rx queue
information - event queue identifier, flags for handling received packets,
scheduler type, event priority, polling frequency of the receive queue
and flow identifier in rte_event_eth_rx_adapter_queue_conf structure
Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Include vector configuration into the structure
``rte_event_eth_rx_adapter_queue_conf`` that is used to configure
Rx adapter ethernet device Rx queue parameters.
This simplifies event vector configuration as it avoids splitting
configuration per Rx queue.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
