This patch removes the crypto/kasumi folder and gathers all kasumi PMD
implementation specific details into a single file,
pmd_kasumi.c in the crypto/ipsec_mb folder.
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch updates the dependency requirement information
for aesni-gcm, aesni-mb, snow3g, zuc, and kasumi PMDs. Previously
building these PMDs with Make will fail when the system is
installed intel-ipsec-mb library version 1.0 or newer.
Since Make build system is deprecated already, instead of fixing
the issue the documentation is updated to state it.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Updated AESNI MB and AESNI GCM, KASUMI, ZUC and SNOW3G PMD documentation
guides with information about the latest Intel IPSec Multi-buffer
library supported.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Since the built driver filenames have changed in DPDK 20.11, we need to
update the driver doc to match.
Most drivers start their section with the driver filename highlighted in
bold, while a number were missing the highlight. When updating the names,
add the markers for bold text to any missing it, so as to have things more
consistent.
Fixes: a20b2c01a7a1 ("build: standardize component names and defines")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The intel-ipsec-mb library requires NASM as a dependency.
Steps on how to get and install NASM are added on the documentation
of the crypto PMDs which requires the library.
Bugzilla ID: 417
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Updated SNOW3G and KASUMI PMD documentation guides
with information about the latest Intel IPSec Multi-buffer
library supported.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The following crypto PMDs use the Intel Multi-buffer library:
- AESNI MB PMD
- AESNI GCM PMD
- ZUC PMD
- KASUMI PMD
- SNOW3G PMD
When this library is built with gcc < 5.0, it might throw
some compilation issues. A workaround has been added in the
repo of this library, so a note on this has been added
to the documentation of these PMDs.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Link against Intel IPsec Multi-buffer library, which
added support for KASUMI-F8 and KASUMI-F9 from version v0.53,
moving from libSSO KASUMI library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Intel's libsso_kasumi library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Documentation of some virtual crypto PMDs have a sample command line
to show how to initialize the device on a specific application,
L2fwd-crypto.
This was meant to be used as a reference, but these lines themselves
do not work, as the sample application used required more parameters,
which are added in this commit to have a fully functional example.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
For KASUMI F9 algorithm, COUNT, FRESH and DIRECTION
input values need to be contiguous with
the message, as described in the KASUMI and QAT PMD
documentation.
Before, the COUNT and FRESH values were set
as part of the AAD (now IV), but always set before
the beginning of the message.
Since now the IV is set after the crypto operation,
it is not possible to have these values in the
expected location.
Therefore, as these are required to be contiguous,
cryptodev API will expect these them to be passed
as a single buffer, already constructed, so
authentication IV parameters not needed anymore.
Fixes: 681f540da52b ("cryptodev: do not use AAD in wireless algorithms")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
SNOW3G and KASUMI SW libraries encrypt buffers
assuming that they are padded to a specific block size.
This behaviour can be changed to avoid buffer overflow,
by modifying the Makefile of these libraries.
Therefore, the Installation section in the SNOW3G and
KASUMI documentation has been extended, to document
this case.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The VDEV code will move to the bus drivers directory.
Rename functions from rte_eal_vdev_ to rte_vdev_
to prepare the move of the driver out of EAL.
The prefix rte_eal_vdrv_ is also renamed to rte_vdev_.
It was used for registration of vdev drivers.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The coremask option in DPDK is difficult to use and we should be
promoting the use of the corelist (-l) option. The patch
adjusts the docs to use -l EAL option instead of the -c option.
The patch only changes the docs and not the code as the -c option
will continue to exist unless it is removed in the future. The -c
option should be kept to maintain backward compatibility.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Libsso KASUMI library has to be built with specific
parameters to make the KASUMI PMD be built as
a shared library, so a note has been added in
its documentation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
KASUMI PMD only supports bit-level cipher operations
when destination buffer is different from the source
(out of place operations). This commit adds a check
in the code to prevent the user from trying to perform
in-place bit-level ciphering.
Fixes: 2773c86d061a ("crypto/kasumi: add driver for KASUMI library")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added new SW PMD which makes use of the libsso_kasumi SW library,
which provides wireless algorithms KASUMI F8 and F9
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_KASUMI_F8
- RTE_CRYPTO_SYM_AUTH_KASUMI_F9
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
