HWRM response was parsed after releasing the spinlock.
Fixes: 19e6af01bb ("net/bnxt: support get/set EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Fixed the return values of few routines to return standard error code.
Also fixed few error logs to more meaningful one.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Fixes: e3d8f1e6a6 ("net/bnxt: cache address of doorbell to subsequent access")
Fixes: 19e6af01bb ("net/bnxt: support get/set EEPROM")
Fixes: b7435d660a ("net/bnxt: add ntuple filtering support")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
HWRM_CHECK_RESULT() checks the return value of HWRM command and returns
in case the command fails. There is no need of return value check after
HWRM_CHECK_RESULT().
Fixes: 49947a13ba ("net/bnxt: support Tx loopback, set VF MAC and queues drop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
rte_intr_callback_unregister() can fail if the handler happens to
be active at the time of the call. Add logic to retry a reasonable
number of times to help ensure that the callback is unregistered
on uninit.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use the completion ring associated with the default Rx ring
when configuring the default completion ring ID instead
of the async completion ring ID.
Fixes: f8168ca0e6 ("net/bnxt: support thor controller")
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If interrupt registration fails during device init, driver invokes
uninit which in turn causes error messages while trying to free
vnic filters. Fix this by moving filter initialization call before
interrupt registration.
Fixes: 1b533790f4 ("net/bnxt: avoid invalid vnic id in set L2 Rx mask")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. bnxt_dev_init() invokes bnxt_dev_uninit() on failure. So there is
no need to do individual function cleanups in failure path.
2. rearrange the check for primary process to remove an unwanted goto.
3. fix to invoke bnxt_hwrm_func_buf_unrgtr() in bnxt_dev_uninit() when
it is needed.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
1. Default filter is tied to VNIC 0 at index 0. After finding the filter
with mac_index 0 and set the new MAC address, looping through
remaining filters is unnecessary.
2. Added a check for NULL MAC address.
3. bnxt_hwrm_set_l2_filter() clears the existing filter configuration
first before applying new filter settings. Hence there is no need to
invoke bnxt_hwrm_clear_l2_filter() explicitly in
bnxt_set_default_mac_addr_op().
Fixes: d69851df12 ("net/bnxt: support multicast filter and set MAC addr")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is an unconditional delay in link update op.
Fixed it to wait only if wait for request completion is set.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
HWRM command to add MAC address can fail. Driver should check
the return value of HWRM command and do the house keeping properly.
Fixes: 778b759ba1 ("net/bnxt: add MAC address")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
rte_mem_virt2iova() function returns RTE_BAD_IOVA on failure, not zero.
Fixes: 62196f4e09 ("mem: rename address mapping function to IOVA")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
1. during port start, if bnxt_init_chip() return error
bnxt_dev_start_op() invokes bnxt_shutdown_nic() which in turn calls
bnxt_free_all_hwrm_resources() to free up resources. Hence remove the
bnxt_free_all_hwrm_resources() from bnxt_init_chip() failure path.
2. fix to check the return value of rte_intr_enable() as this call
can fail.
3. set bp->dev_stopped to 0 only when port start succeeds.
4. handle failure cases in bnxt_init_chip() routine to do proper
cleanup and return correct error value.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
The current ether_unformat_addr code was based off of
BSD ether_aton. That version changed what was allowed
by the cmdline ether address parser.
For example, it allows dropping leading zeros.
Change the code to be more restrictive and only allow the fully
expanded standard formats.
Bugzilla ID: 324
Fixes: 596d31092d ("net: add function to convert string to ethernet address")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
When NVM API version is 1.7 or above adminq operation to set TPID is
set as supported. This cause using adminq instead of registers.
For SFP X722 FW4.16, reported NVM API version is 1.8, and this cause
adminq operation to set as supported but it is not supported on FW4.16
Additional check added for SFP X722 to not enable adminq operation.
Fixes: 73cd7d6dc8 ("net/i40e: use set switch AQ instead of register setting")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Add return value check for i40e_vsi_delete_mac call in
rte_pmd_i40e_remove_vf_mac_addr as per coverity issue.
Coverity issue: 277224
Fixes: e0cb96204b ("net/i40e: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When set flow ipv6 tc rule, ice_get_flow_field will set error.
This patch fixes this issue.
Fixes: d76116a467 ("net/ice: add generic flow API")
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Action is a list. We should check each element of the action
rather than the first one.
This patch fixes this issue.
Fixes: d76116a467 ("net/ice: add generic flow API")
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
ice_get_flow_field should not set error if item->type is
RTE_FLOW_ITEM_TYPE_VOID.
This patch fixes this issue.
Fixes: d76116a467 ("net/ice: add generic flow API")
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When secondary process is run was noticing that the log always
contained complaints about unable to parse devargs.
It turns out that an empty devargs turns into "" and this
value is not parsable. Change the failsafe secondary to just
skip doing devargs if it empty.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The generic RTE_LOGTYPE_PMD is a historical relic and should
not be used. Bonding driver was still using it in one place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some configuration options can not be tested properly with testpmd
because it automatically starts all ports. This makes it harder
to test driver handling of configuration options:
(for example rx_deferred_start).
Add new command line flag --disable-device-start which skips
the device start. The port can then be started manually later.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add checking for vnic id before sending message to chimp in
bnxt_hwrm_vnic_plcmode_cfg().
Fixes: db678d5c2b ("net/bnxt: add HWRM VNIC configure")
Cc: stable@dpdk.org
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
If ntuple filtering is disabled, FW will return max_vnics=1.
Due to this only single Rxq is created.
Change to max_rx_rings = RTE_MIN(bp->max_rx_rings, bp->max_stat_ctx) to
fix it.
Fixes: 6d8109bcb3 ("net/bnxt: check VF resources if resource manager is enabled")
Cc: stable@dpdk.org
Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
The cleanup/rollback operation post rte_eth_dev_start failure might end
up invoking an HWRM cmd even on an invalid vNIC resulting in error
messages being logged needlessly.
Fix to check for the same before issuing the HWRM cmd.
Fixes: c09f57b49c ("net/bnxt: add start/stop/link update operations")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Avoid null pointer dereference when allocating an insulated
completion ring by basing nq ring allocation on whether an
nq ring was requested instead of whether the device supports
nq rings.
Fixes: f8168ca0e6 ("net/bnxt: support thor controller")
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Simplify nq doorbell handling code by removing redundant db
parameter and consolidating NQ doorbell macro into the inline
function that uses it.
Add "enable interrupt" variant of nq write. This will be used
in a subsequent commit.
When initializing nq doorbell, don't assume that only the
"disable interrupt" form will be used.
Fixes: f8168ca0e6 ("net/bnxt: support thor controller")
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Save the number of EM flow count returned by the FW in HWRM_FUNC_QCFG
and use it to calculate the overall pool of L2 contexts supported by FW.
Fixes: 6d8109bcb3 ("net/bnxt: check VF resources if resource manager is enabled")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
For Tx-ring # 104 and higher, the doorbell register was incorrectly
configured due to which FW was not able to receive the notification
of packet to transmit.
With this fix, user can run traffic upto 256 rings.
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Move call site of bnxt_rxq_vec_setup() to ensure that rxq->rxrearm_nb
and rxq->rxrearm_start are reinitialized correctly when a port is
restarted.
Fixes: bc4a000f2f ("net/bnxt: implement SSE vector mode")
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Christopher Reder <christopher.reder@broadcom.com>
Initialize the state of the completion valid indicator
when a completion ring is freed, otherwise completions may
not be processed when a new ring is allocated.
Fixes: 5735eb2419 ("net/bnxt: support Tx batching")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
VF driver should not fail probe if the host PF driver has not assigned
any MAC address for the VF. It should generate a random MAC address and
configure the MAC and then continue probing the device.
Fixes: be160484a4 ("net/bnxt: check if MAC address is all zeros")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fixed couple of possible segfaults due to NULL pointer
dereference in case of probe failure.
Fixes: c09f57b49c ("net/bnxt: add start/stop/link update operations")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. refactor stats allocation code to new routine
2. check for extended statistics support depends on "hwrm_spec_code"
which is set in bnxt_hwrm_ver_get called later. Hence we were never
querying extended port stats as flags field was not updated. Fixed
this by moving the stats allocation after the call to
bnxt_hwrm_ver_get.
3. we were incorrectly passing the host address used for port
statistics to PORT_QSTATS_EXT command. Fixed this by passing the
correct extended stats address.
Fixes: f55e12f334 ("net/bnxt: support extended port counters")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
With the latest published interface of
rte_eal_hotplug_[add,remove](), and rte_eth_dev_close(),
rte_eth_dev_close() would cleanup all the data structures of
port's eth dev leaving the device common resource intact
if RTE_ETH_DEV_CLOSE_REMOVE is set in dev flags.
So a new command "detach device" (~hotplug remove) to work,
with device identifier like "port attach" is added
to be able to detach closed devices.
Also to display currently probed devices, another command
"show device info <identifier>|all" is also added as a
part of this change.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
GRE key (rte_flow_item_type_gre_key) is also needed in
raw encapsulation/decapsulation.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Open the MPLS's TC and S bits of rte_flow_item_mpls in command line.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch intend to support
action_raw_encap/decap [1] in a generic and convenient way.
Two new commands - set raw_encap, set raw_decap are introduced just
like the other commands for encap/decap, i.e. set vxlan.
These two commands have corresponding global buffers
which can be used by PMD as the input buffer for raw encap/decap.
The commands use the rte_flow pattern syntax to help user build the
raw buffer in a convenient way.
A common way to use it:
- encap matched egress packet with VxLAN tunnel:
testpmd> set raw_encap eth src is 10:11:22:33:44:55 / vlan tci is 1
inner_type is 0x0800 / ipv4 / udp dst is 4789 / vxlan vni
is 2 / end_set
testpmd> flow create 0 egress pattern eth / ipv4 / end actions
raw_encap / end
- decap l2 header and encap GRE tunnel on matched egress packet:
testpmd> set raw_decap eth / end_set
testpmd> set raw_encap eth dst is 10:22:33:44:55:66 / ipv4 / gre
protocol is 0x0800 / end_set
testpmd> flow create 0 egress pattern eth / ipv4 / end actions
raw_decap / raw_encap / end
- decap VxLAN tunnel and encap l2 header on matched ingress packet:
testpmd> set raw_encap eth src is 10:11:22:33:44:55 type is 0x0800 /
end_set
testpmd> set raw_decap eth / ipv4 / udp / vxlan / end_set
testpmd> flow create 0 ingress pattern eth / ipv4 / udp dst is 250 /
vxlan vni is 0x1234 / ipv4 / end actions raw_decap /
raw_encap / queue index 1 / mark id 0x1234 / end
[1] http://mails.dpdk.org/archives/dev/2018-October/116092.html
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The help string of set vxlan*, set nvgre* are in "config" section.
But they actually do not alter NIC or testpmd's configuration and
they will be used by "flow" command later.
Put them in "filters" section along with "flow" command seems more
reasonable.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previously in the PCAP PMD queues has to be defined as RxQ and TxQ
pairs, even if the need is only Rx or only Tx:
"--vdev net_pcap0,tx_pcap=tx.pcap,rx_pcap=rx.pcap"
Following commit enabled only providing Rx queue, and if Tx queue is
not provided PMD drops the Tx packets automatically:
Commit a3f5252e5c ("net/pcap: enable infinitely Rx a pcap file")
"--vdev net_pcap0,rx_pcap=rx.pcap"
This commit enables same thing for Rx queue, user no more have to
provide a Rx queue (rx_iface or rx_pcap), for this case a dummy Rx
burst function is used which doesn't return any packet at all:
"--vdev net_pcap0,tx_pcap=tx.pcap"
This makes only saving packets to a pcap file use case easy.
When both Rx and Tx queues are missing PMD will return an error.
(Single interface is still supported: "--vdev net_pcap0,iface=eth0")
Signed-off-by: Aideen McLoughlin <aideen.mcloughlin@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Recent modifications to admin command queue polling logic
did not support 32-bit applications. Updated the driver to
work for 32 or 64 bit applications
Fixes: 3adcba9a89 ("net/ena: update HAL to the newer version")
Cc: stable@dpdk.org
Signed-off-by: David Harton <dharton@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
This patch updates "show port info [port_id]" command to display
the tx_desc_lim.nb_seg_max and tx_desc_lim.nb_mtu_seg_max fields
of rte_eth_dev_info structure.
Fixes: 4fb7e803eb ("ethdev: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
In case the asynchronous devx commands are not supported in RDMA core
fallback to use a basic counter management.
Here, the PMD counters cashe is redundant and the host thread doesn't
update it. hence, each counter operation will go to the FW and the
acceleration reduces.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
All the DV counters are cashed in the PMD memory and are contained in
pools which are contained in containers according to the counters
allocation type - batch or single.
Currently, the flow counter query is done synchronously in pool
resolution means that on the user request a FW command is triggered to
read all the counters in the pool.
A new feature of devX to asynchronously read batch of flow counters
allows to accelerate the user query operation.
Using the DPDK host thread, the PMD periodically triggers asynchronous
query in pool resolution for all the counter pools and an interrupt is
triggered by the FW when the values are updated.
In the interrupt handler the pool counter values raw data is replaced
using a double buffer algorithm (very fast).
In the user query, the PMD just returns the last query values from the
PMD cache - no system-calls and FW commands are triggered from the user
control thread on query operation!
More synchronization is added with the host thread:
Container resize uses double buffer algorithm.
Pools growing in container uses atomic operation.
Pool query buffer replace uses a spinlock.
Pool minimum devX counter ID uses atomic operation.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When the counter countainer has no more space to store more counter
pools try to resize the container to allow more pools to be created.
So, the only limitation for the maximum counter number is the memory.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The DevX interface exposes a new feature to the PMD that can allocate a
batch of counters by one FW command. It can improve the flow
transaction rate (with count action).
Add a new counter pools mechanism to manage HW counters in the PMD.
So, for each flow with counter creation the PMD will try to find a free
counter in the PMD pools container and only if there is no a free
counter, it will allocate a new DevX batch counters.
Currently we cannot support batch counter for a group 0 flow, so
create a 2 container types, one which allocates counters one by
one and one which allocates X counters by the batch feature.
The allocated counters objects are never released back to the HW
assuming the flows maximum number will be close to the actual value of
the flows number.
Later, it can be updated, and dynamic release mechanism can be added.
The counters are contained in pools, each pool with 512 counters.
The pools are contained in counter containers according to the
allocation resolution type - single or batch.
The cache memory of the counters statistics is saved as raw data per
pool.
All the raw data memory is allocated for all the container in one
memory allocation and is managed by counter_stats_mem_mng structure
which registers all the raw memory to the HW.
Each pool points to one raw data structure.
The query operation is in pool resolution which updates all the pool
counter raw data by one operation.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
