Add a new API rte_eth_dev_get_supported_ptypes to query what packet types
can be filled by a given device. The device should be already started or
its PMD RX burst function already decided, since the packet types supported
may vary depending on RX function.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Normal usage of rte_eth_dev_xstats_get is to call twice. The
first time the function is called with portid, xstats = NULL
and n = 0; this returns the number of entries in the statistics
table that need to be allocated.
The problem is that the routine adds a count value to NULL (0)
and assumes that this is a valid pointer (it isn't). Device drivers
all have a check for NULL, and this no longer matches.
Fixes: d4fef8b0d5e5 ("ethdev: expose generic and driver specific stats in xstats")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Ensure that a bonded slave device is not detached,
until it is removed from the bonded device.
Fixes: 2efb58cbab6e ("bond: new link bonding library")
Fixes: a45b288ef21a ("bond: support link status polling")
Fixes: 494adb7f63f2 ("ethdev: add device fields from PCI layer")
Fixes: b1fb53a39d88 ("ethdev: remove some PCI specific handling")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The names of function for tunnel port configuration are not
accurate. They're tunnel_add/del, better change them to
tunnel_port_add/del.
The old functions are directly replaced because the API and ABI
compatibility of ethdev are already broken in 16.04.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add functions to support l2 tunnel configuration and operations.
1, L2 tunnel ether type modification.
It means modifying the ether type of a specific type of tunnel.
So the packet with this ether type will be parsed as this type
of tunnel.
2, Enabling/disabling l2 tunnel support.
It means enabling/disabling the ability of parsing the specific
type of tunnel. This ability should be enabled before we enable
filtering, forwarding, offloading for this specific type of
tunnel.
3, Insertion and stripping for l2 tunnel tag.
4, Forwarding the packets to a pool based on l2 tunnel tag.
Only support e-tag tunnel now.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
In order to set ether type of VLAN for single VLAN, inner
and outer VLAN, the VLAN type as an input parameter is added
to 'rte_eth_dev_set_vlan_ether_type()'.
In addition, corresponding changes in e1000, ixgbe and i40e
are also added.
It is an ABI break but ethdev library is already bumped for 16.04.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Many sample apps include internal buffering for single-packet-at-a-time
operation. Since this is such a common paradigm, this functionality is
better suited to being implemented in the ethdev API.
The new APIs in the ethdev library are:
* rte_eth_tx_buffer_init - initialize buffer
* rte_eth_tx_buffer - buffer up a single packet for future transmission
* rte_eth_tx_buffer_flush - flush any unsent buffered packets
* rte_eth_tx_buffer_set_err_callback - set up a callback to be called in
case transmitting a buffered burst fails. By default, we just free the
unsent packets.
As well as these, an additional reference callbacks are provided, which
frees the packets:
* rte_eth_tx_buffer_drop_callback - silently drop packets (default
behavior)
* rte_eth_tx_buffer_count_callback - drop and update user-provided counter
to track the number of dropped packets
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Several NICs can handle 512 entries/queues in their RETA table,
an 8 bit field is not large enough for them.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
User should be able to configure ethdev with zero rx/tx queues,
but both should not be zero.
After above change, rte_eth_dev_tx_queue_config,
rte_eth_dev_rx_queue_config should allocate memory for rx/tx queues only
when number of rx/tx queues are nonzero.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Macros RTE_PROC_PRIMARY_OR_ERR_RET and RTE_PROC_PRIMARY_OR_RET
are blocking the secondary process from using the APIs.
API access should be given to both secondary and primary.
Reported-by: Sean Harte <sean.harte@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Move these error logs and checks on detach capabilities in a common place.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
We are in static functions and those passed arguments can't be NULL.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
The rx_mbuf_alloc_failed counter was only cleared by virtio driver.
Now it is cleared by common rte_eth_stats_reset function for all
drivers at once.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There is a new function in the EAL API for internal use.
It has neither a proper prefix nor a .map export:
libethdev.so: undefined reference to `is_xen_dom0_supported'
Fixes: 719dbebceb81 ("xen: allow determining DOM0 at runtime")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The functions for rx/tx burst, for rx_queue_count and descriptor_done in
the ethdev library all had two copies of the code. One copy in
rte_ethdev.h was inlined for performance, while a second was in
rte_ethdev.c for debugging purposes only. We can eliminate the second
copy of the functions by moving the additional debug checks into the
copies of the functions in the header file. [Any compilation for
debugging at optimization level 0 will not inline the function so the
result should be same as when the function was in the .c file.]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Move the function pointer and port id checking macros to rte_ethdev and
rte_dev header files, so that they can be used in the static inline
functions there. Also replace the RTE_LOG call within
RTE_PMD_DEBUG_TRACE so this macro can be built with the -pedantic flag
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The macros to check that the function pointers and port ids are valid
for an ethdev are potentially useful to have in a common headers for
use with all PMDs. However, since they would then become externally
visible, we apply the RTE_ & RTE_ETH_ prefix to them as approtiate.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add a sanity check for number of tx descriptors requested during tx
queue setup. Return -EINVAL if the number requested does not meet
the tx descriptor requirements of the device.
Fixes: 80a1deb4c77a ("ethdev: add API to retrieve queue information")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add additional functions to support the existing IEEE1588
functionality.
* rte_eth_timesync_write_time(): set the device clock time.
* rte_eth_timesync_read_time(): get the device clock time.
* rte_eth_timesync_adjust_time(): adjust the device clock time.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
This patch refactors the generic queue stats to be exposed
by rte_ethdev_xstats_get().
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Calling the Ethernet driver's link_update function from
rte_eth_dev_start can result in a race condition if the NIC raises
the link interrupt at the same time.
Depending on the interrupt handler implementation, the race can cause
the it to think that it received two consecutive link up interrupts,
and it exits without calling the user callback. Appears to impact
E1000/IGB and virtio drivers only.
Signed-off-by: Tim Shearer <tim.shearer@overturenetworks.com>
Following the same approach taken with dev_started field
in rte_eth_dev_data structure, this patch adds two new fields
in it, rx_queue_state and tx_queue_state arrays, which track
which queues have been started and which not.
This is important to avoid trying to start/stop twice a queue,
which will result in undefined behaviour
(which may cause RX/TX disruption).
Mind that only the PMDs which have queue_start/stop functions
have been changed to update this field, as the functions will
check the queue state before switching it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
use dev_type to distinguish between vdev's and pdev's.
remove pci_dev branches.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The driver fields have been added the rte_eth_dev_data so that it is no
longer necessary access this data through the pci_dev pointer.
The following fields have been added to rte_eth_dev_data:
dev_flags, and macros for dev_flags.
kdrv
numa_node
drv_name
Add function rte_eth_copy_pci_info
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
[Thomas: remove useless flags]
Removed following functions
> rte_eth_dev_save and
> rte_eth_dev_get_changed_port
Added 2 new functions
> rte_eth_dev_get_port_by_name
> rte_eth_dev_get_port_by_addr
Compiled on Linux for following targets
> x86_64-native-linuxapp-gcc
> x86_64-native-linuxapp-clang
> x86_x32-native-linuxapp-gcc
Compiled on FreeBSD for following targets
> x86_64-native-bsdapp-clang
> x86_64-native-bsdapp-gcc
Tested on Linux/FreeBSD:
> port attach eth_null
> port start all
> port stop all
> port close all
> port detach 0
> port attach eth_null
> port start all
> port stop all
> port close all
> port detach 0
Successful run of checkpatch.pl on the diffs
Successful validate_abi on Linux for following targets
> x86_64-native-linuxapp-gcc
> x86_64-native-linuxapp-clang
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Update the strings used for presenting stats to adhere
to the scheme previously presented. Updated xstats_get()
function to handle Q information only if xstats() is not
implemented in the PMD, providing the PMD with the needed
flexibility to expose its extended Q stats.
Add extended statistic section to the programmers
guide, poll mode driver section. This section describes
how the strings stats are formatted, and how the client
code can use this to gather information about the stat.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add the ability for the upper layer to query RX/TX queue information.
Add into rte_eth_dev_info new fields to represent information about
RX/TX descriptors min/max/alig nnumbers per queue for the device.
Add new structures:
struct rte_eth_rxq_info
struct rte_eth_txq_info
new functions:
rte_eth_rx_queue_info_get
rte_eth_tx_queue_info_get
into rte_etdev API.
Left extra free space in the queue info structures,
so extra fields could be added later without ABI breakage.
Add new fields:
rx_desc_lim
tx_desc_lim
into rte_eth_dev_info.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds one new API to get dcb related info.
rte_eth_dev_get_dcb_info
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Different NIC has its specific constraint on the multi-queue
configuration, so move the checking from ethdev lib to drivers.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Old flow director API have been replaced by rte_eth_dev_filter_ctrl
since release 2.0. And no driver in current code support these functions.
All the removed functions are listed below:
- rte_eth_dev_fdir_add_perfect_filter;
- rte_eth_dev_fdir_add_signature_filter;
- rte_eth_dev_fdir_get_infos;
- rte_eth_dev_fdir_remove_perfect_filter;
- rte_eth_dev_fdir_remove_signature_filter;
- rte_eth_dev_fdir_set_masks;
- rte_eth_dev_fdir_update_perfect_filter;
- rte_eth_dev_fdir_update_signature_filter;
The library version was already incremented in a previous patch.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: fix mlx4 and update release notes]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
To obtain detachable flag, pci_drv is accessed in rte_eth_dev_is_detachable().
But pci_drv is only valid if port is enabled. Not to cause illegal access,
add rte_eth_dev_is_valid_port() before accessing.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The patch adds two dev_ops functions to enable and disable rx queue
interrupts.
In addition, it adds rte_eth_dev_rx_intr_ctl/rx_intr_q to support
per port or per queue rx intr event set.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Found by coccinelle script.
If rte_zmalloc() failed in rte_eth_dev_callback_register
then NULL pointer would be dereferenced.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
[Thomas: restore pointer comparison style]
The function rte_eth_dev_is_valid_port is good way to have all
drivers using same function and solves several hotplug related
bugs from drivers not checking attached flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
There are close and detach functions in ethdev.
To keep a consistent naming, PCI functions called by ethdev detach
must be named "detach" instead of "close".
Fix also comments which mix close and uninit names.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Remove non generic stats in rte_stats_strings and mark the relevant
fields in struct rte_eth_stats as deprecated.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Extend rte_eth_xstats_get to retrieve additional stats from the device
driver as well the ethdev generic stats.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
add new apis:
- rte_eth_dev_get_reg_length
- rte_eth_dev_get_reg_info
- rte_eth_dev_get_eeprom_length
- rte_eth_dev_get_eeprom
- rte_eth_dev_set_eeprom
to enable reading device parameters (register and
eeprom) based upon ethtool alike data parameter specification.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add new api:
- rte_eth_dev_default_mac_addr_set
The new api, rte_eth_dev_default_mac_addr_set, uses the
existing dev_op, mac_addr_set, to enable setting mac
addr from ethdev level.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fix return value, using the macro input instead of -EINVAL.
Fixes: 75acd57ad025 ("ethdev: introduce valid port helper")
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Change the order that user supplied RX and TX callbacks are called
to the order that they were added (fifo).
The previous calling order was the reverse of this (lifo) and was
counter intuitive for users.
Suggested-by: Robert Sanford <rsanford@akamai.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Add ethdev API to enable and read IEEE1588/802.1AS PTP timestamps
from devices that support it. The following functions are added:
rte_eth_timesync_enable()
rte_eth_timesync_disable()
rte_eth_timesync_read_rx_timestamp()
rte_eth_timesync_read_tx_timestamp()
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: merged with new macro VALID_PORTID_OR_ERR_RET]
This patch removes CONFIG_RTE_LIBRTE_EAL_HOTPLUG option, and enables it
as default in both Linux and BSD.
Also, to support port hotplug, rte_eal_pci_scan() and below missing
symbols should be exported to ethdev library.
- rte_eal_parse_devargs_str()
- rte_eal_pci_close_one()
- rte_eal_pci_probe_one()
- rte_eal_pci_scan()
- rte_eal_vdev_init()
- rte_eal_vdev_uninit()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
The patch consolidates below functions, and implemented in common
eal code.
- pci_map_device()
- pci_unmap_device()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
