Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
remove __rte_unused instances that are not required.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The VDEV code will move to the bus drivers directory.
Rename functions from rte_eal_vdev_ to rte_vdev_
to prepare the move of the driver out of EAL.
The prefix rte_eal_vdrv_ is also renamed to rte_vdev_.
It was used for registration of vdev drivers.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
We need to update dev->data->dev_link before handling LSC event.
Otherwise it will still have the initial value after the startup of
the program before interrupt callback was executed.
Fixes: 414b202343 ("bonding: fix initial link status of slave")
Cc: stable@dpdk.org
Signed-off-by: Wei Wang <lnykww@gmail.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Currently, 'rte_eth_dev_configure' fails on attempt to setup
max_rx_pkt_len > 2048 if no slaves was added to bonded device.
For example:
rte_eth_dev_attach("eth_bond0,slave=05:00.0,mode=l34", &id)
conf.rxmode.jumbo_frame = 1;
conf.rxmode.max_rx_pkt_len = 9000;
rte_eth_dev_configure(id, 1, 1, &conf)
Result:
EAL: Initializing pmd_bond for eth_bond0
EAL: Create bonded device eth_bond0 on port 4 in mode 2 on socket 0.
rte_eth_dev_configure: ethdev port_id=4 \
max_rx_pkt_len 9018 > max valid value 2048
It's expected that slaves will be added to bonded device inside
'rte_eth_dev_configure' and proper 'max_rx_pktlen' configured
for all of them.
Failure happens because of hardcoded low value of 'max_rx_pktlen'.
Increasing of this value to ETHER_MAX_JUMBO_FRAME_LEN will allow
above scenario (attach + configure).
It is important because it is the way OVS wants to work with
all DPDK devices (including virtual).
Changing the default hardcoded value makes no harm because
all the slaves' related code uses only 'candidate_max_rx_pktlen'
variable.
Fixes: 6cfc6a4f0d ("net/bonding: inherit maximum Rx packet length")
CC: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Eric Kinzie <ehkinzie@gmail.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Some applications like OVS knows nothing about the
device type and wants to use same API to work with
all of them. But bond_pmd, unlike other pmds, requires
additional step (removing of all the slaves) before
closing the device.
In fact that bond_pmd automatically adds all the
devices from kvargs to bonding on configuration it
also should remove all of them on close.
This change is intended to have the same API for physical
and virtual devices. It allows us to handle virtual
devices in OVS in a common way.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
To properly embed the generic rte_device into the rte_eth_dev this reworks
the bonding API to call through rte_eal_vdev_init().
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This is a preparation to embed the generic rte_device into the rte_eth_dev
also for virtual devices.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
When polling the bonded ports for RX packets the old driver would
always start with the first slave in the list. If the requested
number of packets is filled on the first port in a two port config
then the second port could be starved or have larger number of
missed packet errors.
The code attempts to start with a different slave each time RX poll
is done to help eliminate starvation of slave ports. The effect of
the previous code was much lower performance for two slaves in the
bond then just the one slave.
The performance drop was detected when the application can not poll
the rings of Rx packets fast enough and the packets per second for
two or more ports was at the threshold throughput of the application.
At this threshold the slaves would see very little or no drops in
the case of one slave. Then enable the second slave you would see
a large drop rate on the two slave bond and reduction in throughput.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
When possible, replace the uses of rte_mempool_create() with
the helper provided in librte_mbuf: rte_pktmbuf_pool_create().
This is the preferred way to create a mbuf pool.
This also updates the documentation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some virtual pmds report a different name than the vdev driver name
registered in eal.
While it does not hurt, let's try to be consistent.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Since rte_eth_dev_info_get does memset() on dev_info before
calling device specific code, the explicit assignment of NULL
in all these virtual drivers has no effect.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
This reverts commit 5b7bb2bda5.
It is necessary to reconfigure all queues every time because configuration
can be changed.
For example, if we're reconfiguring bonding device with new memory pool,
already configured queues will still use the old one. And if the old
mempool be freed, application likely will panic in attempt to use
freed mempool.
This happens when we use the bonding device with OVS 2.6 while MTU
reconfiguration:
PANIC in rte_mempool_get_ops():
assert "(ops_index >= 0) && (ops_index < RTE_MEMPOOL_MAX_OPS_IDX)" failed
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Jan Blunck <jblunck@infradead.org>
After a slave interface is removed from a bond group it still has the
configuration of the bond interface. Lets enforce that the slave interface
is reconfigured after removal by resetting it.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
This moves the non-PCI related initialization of the link state interrupt
callback list and the setting of the default MTU to rte_eth_dev_allocate()
so that drivers only need to set non-default values.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Lets clear the eth_dev->data when allocating a new rte_eth_dev so that
drivers only need to set non-zero values.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
We should not drop the slow packets which subtype is
not marker or lacp. Because slow packets have other subtype
like OAM,OSSP,user defined and so on.
Signed-off-by: Haifeng Lin <haifeng.lin@huawei.com>
Reviewed-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
This registers the legacy names of the driver being renamed in
commit 2f45703c17 ("drivers: make driver names consistent").
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
add cb_arg parameter to the _rte_eth_dev_callback_process function.
Adding a parameter to this function allows passing information
to the application when an eth device event occurs such as
a VF to PF message.
This allows the application to decide if a particular function
is permitted.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Alex Zelezniak <alexz@att.com>
All macros related to driver registeration renamed from DRIVER_*
to RTE_PMD_*
This includes:
DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI
DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE
DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV
DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING
DRIVER_EXPORT_* -> RTE_PMD_EXPORT_*
Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
SR-IOV virtual functions cannot rely on promiscuous mode for the reception
of VLAN tagged frames. Program the VLAN filter for each slave when a
VLAN is configured for the bonding master.
Signed-off-by: Eric Kinzie <ehkinzie@gmail.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
It's possible for the bonding driver to mistakenly reject an interface
based in it's, as yet, unnegotiated link speed and duplex. Always allow
the interface to be added to the bonding interface but require link
properties validation to succeed before slave is activated.
Fixes: 2efb58cbab ("bond: new link bonding library")
Signed-off-by: Eric Kinzie <ehkinzie@gmail.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Inline with PCI probe and remove, VDEV probe and remove hooks provide
a uniform naming.
PCI probe represents scan and driver initialization. For VDEV, it will
represent argument parsing and initialization.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
- All devices register themselfs by calling a kind of DRIVER_REGISTER_XXX.
The PMD_REGISTER_DRIVER is not used anymore.
- PMD_VDEV type is also not being used - can be removed from all VDEVs.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
All PMD_VDEV drivers can now use rte_vdev_driver instead of the
rte_driver (which is embedded in the rte_vdev_driver).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Now that hotplug has been moved to eal, there is no reason to keep the
device type in this layer.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The older versions of rte_eth_bond_8023ad_conf_get and
rte_eth_bond_8023ad_setup were available in the old way since 2.0 - at
least according to the map file.
But versioning in the code was set to 16.04.
That breaks compatibility checks for 2.0 on that library.
For example with the dpdk abi checker:
http://people.canonical.com/~paelzer/compat_report.html
To fix, version the old symbols on the 2.0 version as they were
initially added to the map file.
See http://people.canonical.com/~paelzer/compat_report.html
Fixes: dc40f17a ("net/bonding: allow external state machine in mode 4")
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The range of the supported bonding modes is 0-6, instead of 0-4.
Fixes: cb6696d220 ("drivers: update registration macro usage")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Driver arguments shown with DRIVER_REGISTER_PARAM_STRING
have been separated in multiple lines and indented to
ease their readability.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Since now the PMD_REGISTER_DRIVER macro sets the driver names,
there is no need to have the rte_driver structure setting it
statically, as it will get overridden.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
In order to avoid API breakage, the driver names of the virtual devices
have been renamed to their original name, before the modification
of the PMD_REGISTER_DRIVER macro, which sets now the driver names.
Fixes: cb6696d220 ("drivers: update registration macro usage")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Modify the PMD_REGISTER_DRIVER macro, adding a name argument to it. The
addition of a name argument creates a token that can be used for subsequent
macros in the creation of unique symbol names to export additional bits of
information for use by the pmdinfogen tool. For example:
PMD_REGISTER_DRIVER(ena_driver, ena);
registers the ena_driver struct as it always did, and creates a symbol
const char this_pmd_name0[] __attribute__((used)) = "ena";
which pmdinfogen can search for and extract. The subsequent macro
DRIVER_REGISTER_PCI_TABLE(ena, ena_pci_id_map);
creates a symbol const char ena_pci_tbl_export[] __attribute__((used)) =
"ena_pci_id_map";
Which allows pmdinfogen to find the pci table of this driver
Using this pattern, we can export arbitrary bits of information.
pmdinfo uses this information to extract hardware support from an object
file and create a json string to make hardware support info discoverable
later.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Provide functions to allow an external 802.3ad state machine to transmit
and receive LACPDUs and to set the collection/distribution flags on
slave interfaces.
Signed-off-by: Eric Kinzie <ehkinzie@gmail.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Instead of a hard-coded maximum receive length, allow the bonded interface
to inherit this limit from the slave interfaces. This allows
an application that uses jumbo frames to pass realistic values to
rte_eth_dev_configure without causing an error.
Before the bonding interface is configured, allow slaves with any
max_rx_pktlen to be added and remember the lowest of these values as
a candidate value. During dev_configure, set the bond device's
max_rx_pktlen to the candidate value. After this point only slaves
with a max_rx_pktlen greater or equal to that of the bonding device
can be added.
If all slaves are removed, the bond device's pktlen is cleared.
Signed-off-by: Eric Kinzie <ehkinzie@gmail.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch modifies bond_mode_alb_enable function.
When mempool allocation fails errno code is returned
instead of rte_panic. This allow to decide on application level
if it should quit or retry for mempool allocation.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch adds missing DEPDIRS to avoid any library referring to
symbols they are not linked against.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The RTE_ETH_VALID_PORTID_OR_ERR_RET macro is used in some places
to check if a port id is valid or not. This commit makes use of it in
some new parts of the code.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542a).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Loop that calculates total number of tx descriptors in slave tx queues
should iterate up to nb_tx_queues, not nb_rx_queues.
Fixes: 3ef7955700 ("bonding: fix LACP mempool size")
Signed-off-by: Vladyslav Buslov <vladyslav.buslov@harmonicinc.com>
Stopping then re-starting a bond interface containing slaves that
used polling for link detection caused the bond to think all slave
links were down and inactive.
Move the start of the polling for link from slave_add() to
bond_ethdev_start() and in bond_ethdev_stop() make sure we clear
the last_link_status of the slaves.
Fixes: a45b288ef2 ("bond: support link status polling")
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
