This new API supersedes all the legacy filter types described in
rte_eth_ctrl.h. It is slightly higher level and as a result relies more on
PMDs to process and validate flow rules.
Benefits:
- A unified API is easier to program for, applications do not have to be
written for a specific filter type which may or may not be supported by
the underlying device.
- The behavior of a flow rule is the same regardless of the underlying
device, applications do not need to be aware of hardware quirks.
- Extensible by design, API/ABI breakage should rarely occur if at all.
- Documentation is self-standing, no need to look up elsewhere.
Existing filter types will be deprecated and removed in the near future.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Exported header files for use by applications should be self sufficient and
allow out of order inclusion. Moreover, they must include all the system
headers they need for types and macros.
This commit prevents the following errors:
error: `RTE_MAX_LCORE' undeclared here (not in a function)
error: `RTE_LPM_VALID_EXT_ENTRY_BITMASK' undeclared
(first use in this function)
error: #error "Unsupported cache line size"
error: `asm' undeclared (first use in this function)
error: implicit declaration of function `[...]'
error: unknown type name `[...]'
error: field `mac_addr' has incomplete type
error: `CHAR_BIT' undeclared here (not in a function)
error: `struct [...]' declared inside parameter list
error: unknown type name `uint8_t'
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
- added VXLAN, GENEVE and NVGRE tunnel flow types
- added PORT flow type for accounting physical/virtual
port or channel number in flow creation
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch fixes comments for tunnel filters and flow director flows.
e.g. states fields which are in big endian.
Fixes: 7b1312891b ("ethdev: add IP in GRE tunnel")
Fixes: d69be32d4d ("ethdev: structures to add or delete flow director")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds RTE_ETH_INPUT_SET_L3_IP4_TTL,
RTE_ETH_INPUT_SET_L3_IP6_HOP_LIMITS input field types and extends
struct rte_eth_ipv4_flow and rte_eth_ipv6_flow to support filtering
by tos, protocol and ttl.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Change the fields of outer_mac and inner_mac in struct
rte_eth_tunnel_filter_conf from pointer to struct in order to
keep the code's readability.
Signed-off-by: Xutao Sun <xutao.sun@intel.com>
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add functions to support l2 tunnel configuration and operations.
1, L2 tunnel ether type modification.
It means modifying the ether type of a specific type of tunnel.
So the packet with this ether type will be parsed as this type
of tunnel.
2, Enabling/disabling l2 tunnel support.
It means enabling/disabling the ability of parsing the specific
type of tunnel. This ability should be enabled before we enable
filtering, forwarding, offloading for this specific type of
tunnel.
3, Insertion and stripping for l2 tunnel tag.
4, Forwarding the packets to a pool based on l2 tunnel tag.
Only support e-tag tunnel now.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Fixed issue of byte order in ethdev library that the structure
for setting fdir's mask and flow entry is inconsist and made
inputs of mask be in big endian.
Fixes: 2d4c1a9ea2 ("ethdev: add new flow director masks")
Fixes: 76c6f89e80 ("ixgbe: support new flow director masks")
Reported-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add support for RTE_ETH_FDIR_PASSTHRU flow director behavior so
output queue is assigned by other filters.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Some comments have a wrong space between /** and <.
Seen with
git grep '\*\* <'
Reported-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
By default, only first 3 bytes of GRE key will be used for hash or
FD calculation. With these changes, it can select 3 or 4 bytes of
GRE key for hash or FD calculation.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
The default input set of fields of a received packet are loaded from
firmware, which cannot be modified even users want to use different
fields for RSS or flow director. Here adds more flexibilities of
selecting packet fields for hash calculation or flow director for
users.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Define the new modes and modify the filter and mask structures for
the mac vlan and tunnel modes.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The extended SCTP flow entries are now part of the standard API.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch adds a new struct rte_eth_l2_flow to support
l2_payload flow type.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Flow types was defined actually for i40e hardware specifically,
and wasn't able to be used for defining RSS offload types of all
PMDs. It removed the enum flow types, and uses macros instead
with new names. The new macros can be used for defining RSS
offload types later. Also modifications are made in i40e and
testpmd accordingly.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with new flow director API]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It wrongly calculates the size of the flow type mask array. The fix
is to align the flow type maximum index ID with the number of
element bit width, and then divide the number of element bit width.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Following structures are removed:
- rte_2tuple_filter
- rte_5tuple_filter
Following APIs are removed:
- rte_eth_dev_add_2tuple_filter
- rte_eth_dev_remove_2tuple_filter
- rte_eth_dev_get_2tuple_filter
- rte_eth_dev_add_5tuple_filter
- rte_eth_dev_remove_5tuple_filter
- rte_eth_dev_get_5tuple_filter
It also move macros TCP_*_FLAG to rte_eth_ctrl.h, and removes the macro
TCP_UGR_FLAG which is duplicated with TCP_URG_FLAG.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
[Thomas: remove also from version map]
This patch defines ntuple filter type RTE_ETH_FILTER_NTUPLE and its structure rte_eth_ntuple_filter.
It also corrects the typo TCP_UGR_FLAG to TCP_URG_FLAG
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds RTE_ETH_FLOW_TYPE_RAW and RTE_ETH_RAW_PAYLOAD to support the
flexible payload is started from the beginning of the packet.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
In order to support hash filter configuration, filter type of hash
is added, also the corresponding structures, macros and definitions
are added.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The name of the rte_eth_fdir_flow's rte_eth_ipv6_flow attribute,
'ip6_flow', clashes with a macro defined in
/usr/include/netinet/ip6.h, such that when DPDK is linked with an
application that uses the afforementioned header, the macro is
expanded within the DPDK struct, causing a compilation error.
Rename the relevant attribute in DPDK to resolve this.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
A new structure of ethertype filter is defined in rte_eth_ctrl.h
for filter_ctrl api
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
define structures for getting flow director statistics
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
define structures for getting flow director information includes:
- mode
- supported flow types
- table space
- flexible payload size and granularity
- configured flexible payload and mask information
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
define structures to add or delete flow director filter
- struct rte_eth_fdir_filter
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Use the enum type for filter type.
It fixes the compilation error under ICC compiler.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add definitions of the data structures of tunneling packet filter.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add two functions to support UDP tunneling port configuration.
There are "some" destination UDP port numbers that have unique meaning.
In terms of VxLAN, "IANA has assigned the value 4789 for the VXLAN UDP port,
and this value SHOULD be used by default as the destination UDP port.
Some early implementations of VXLAN have used other values for the destination
port. To enable interoperability with these implementations, the destination
port SHOULD be configurable."
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Define a new API umbrella to configure any kind of Rx filtering.
New functions:
- rte_eth_dev_filter_supported
- rte_eth_dev_filter_ctrl
Filter types, operations, and structures are defined specifically in new
header file lib/librte_eth/rte_dev_ctrl.h.
As to the implementation discussion, please refer to
http://dpdk.org/ml/archives/dev/2014-September/005179.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
[Thomas: rename ops and remove unused types]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
