The current approach detects the proxy port on each port (re-)plug and
may spam the log with error messages if the PMD does not support flows.
As testpmd is a debug tool, it must not do such implicit port handling.
Instead, the new API should be called only when the user requests that.
Revoke the existing code. Implement an explicit command-line primitive
to let the user find the proxy port themselves. Provide relevant hints.
Fixes: 1179f05cc9 ("ethdev: query proxy port to manage transfer flows")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
GRO and GSO integration in testpmd is relatively self contained and easy
to extract.
Those libraries can be made optional as they provide standalone
features.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Remove the unnecessary rte_atomic.h included in app modules.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Fix spelling errors in comments including doxygen found using codespell.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
This patch adds missing IPv6-Ex and GTPU flow types to port
info command. It also add the same definitions to
str2flowtype(), used to configure flow director.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch fixes the display of the RSS hash types
configured in the port, which displayed "all" even
if only a single type was configured
Fixes: 3c90743dd3 ("app/testpmd: support more types for flow RSS")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
port_rss_hash_key_update() initializes rss_conf with the
RSS key configuration provided by the user, but it calls
rte_eth_dev_rss_hash_conf_get() before calling
rte_eth_dev_rss_hash_update(), which overrides the parsed
RSS config.
While the RSS key value is set again after, this is not
the case of the key length. It could cause out of bounds
access if the key length parsed is smaller than the one
read from rte_eth_dev_rss_hash_conf_get().
This patch restores the key length before the
rte_eth_dev_rss_hash_update() call to ensure the RSS key
value/length pair is consistent.
Fixes: 8205e241b2 ("app/testpmd: add missing type to RSS hash commands")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
There is no point to do rte_eth_dev_mtu_set() before configure since
set MTU value is overwritten on configure anyway. So, setting of MTU
before configure is rejected now on ethdev level.
If testpmd is going to do configure (e.g. just after testpmd start
with disabled devices start up or any configuration changes in stopped
state which require reconfigure), just save requested MTU in device
config to be applied on reconfigure.
Fixes: 1bb4a528c4 ("ethdev: fix max Rx packet length")
Fixes: b26bee10ee ("ethdev: forbid MTU set before device configure")
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Shared Rx queue must be polled on same core. This patch checks and stops
forwarding if shared RxQ being scheduled on multiple
cores.
It's suggested to use same number of Rx queues and polling cores.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Adds "--rxq-share=X" parameter to enable shared RxQ.
Rx queue is shared if device supports, otherwise fallback to standard
RxQ.
Shared Rx queues are grouped per X ports. X defaults to UINT32_MAX,
implies all ports join share group 1. Queue ID is mapped equally with
shared Rx queue ID.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Dump device capability and Rx domain ID if shared Rx queue is supported
by device.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Current testpmd implementation supports VXLAN only for tunnel offload.
Add GRE, NVGRE and GENEVE for tunnel offload flow matches.
For example:
testpmd> flow tunnel create 0 type vxlan
port 0: flow tunnel #1 type vxlan
testpmd> flow tunnel create 0 type nvgre
port 0: flow tunnel #2 type nvgre
testpmd> flow tunnel create 0 type gre
port 0: flow tunnel #3 type gre
testpmd> flow tunnel create 0 type geneve
port 0: flow tunnel #4 type geneve
Fixes: 1b9f274623 ("app/testpmd: add commands for tunnel offload")
Cc: stable@dpdk.org
Signed-off-by: Eli Britstein <elibr@nvidia.com>
Reviewed-by: Gregory Etelson <getelson@nvidia.com>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Add 'display-xstats' option for using in accompanying with Rx/Tx statistics
(i.e. 'stats-period' option or 'show port stats' interactive command) to
display specified list of extended statistics.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Not all DPDK ports in a given switching domain may have the
privilege to manage "transfer" flows. Add an API to find a
port with sufficient privileges by any port in the domain.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Introduce rte_eth_macaddrs_get() to allow user to retrieve all ethernet
addresses assigned to given port.
Change testpmd to use this new function and avoid referencing directly
rte_eth_devices[].
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
This patch defines new RSS offload types for IPv4 and
L4(TCP/UDP/SCTP) checksum, which are required when users want
to distribute packets based on the IPv4 or L4 checksum field.
For example "flow create 0 ingress pattern eth / ipv4 / end
actions rss types ipv4-chksum end queues end / end", this flow
causes all matching packets to be distributed to queues on
basis of IPv4 checksum.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds multi-process support for testpmd.
For example the following commands run two testpmd
processes:
* the primary process:
./dpdk-testpmd --proc-type=auto -l 0-1 -- -i \
--rxq=4 --txq=4 --num-procs=2 --proc-id=0
* the secondary process:
./dpdk-testpmd --proc-type=auto -l 2-3 -- -i \
--rxq=4 --txq=4 --num-procs=2 --proc-id=1
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Running with stdout suppressed or redirected for further processing
is very confusing in the case of errors. Fix it by logging errors and
warnings to stderr.
Since lines with log messages are touched anyway concatenate split
format strings to make it easier to search using grep.
Fix indent of format string arguments.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Function print_fdir_mask and print_fdir_flex_payload are only called
when either i40e or ixgbe presents. Extend existing #if defined to
include these two functions, to remove "unused function" compilation
warning.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Passing an uint32_t pointer to an enum pointer parameter causes
pointer-sign warning on Windows (converts between pointers to
integer types with different sign), since enum is implicitly
converted to int on Windows.
And the current enum pointer parameter of that function is actually
misleading and should be fixed as an uint32_t pointer parameter.
Fixes: b19da32e31 ("app/testpmd: add FEC command")
Cc: stable@dpdk.org
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Tunnel offload model requires application to obtain PMD related flow
items or actions to construct a flow rule. These elements acquire
internal PMD flow resources that must be explicitly released.
The patch destroys tunnel offload PMD resources after flow creation
failure.
Fixes: 1b9f274623 ("app/testpmd: add commands for tunnel offload")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Counter action query was implemented as part of flow query, but was not
implemented as part of indirect action query.
This patch adds the required implementation.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The port_action_handle_query function supports query operation for
indirect RSS action.
No driver currently supports this operation, and this support is
unnecessary.
Remove it.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Currently, the check for doing DCB test is assigned to
start_packet_forwarding(), which will be called when
run "start" cmd. But fwd_config_setup() is used in many
scenarios, such as, "port config all rxq".
This patch moves the check from start_packet_forwarding()
to fwd_config_setup().
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
After DCB mode is configured, if we decrease the number of RX and TX
queues, fwd_config_setup() will be called to setup the DCB forwarding
configuration. And forwarding streams are updated based on new queue
numbers in fwd_config_setup(), but the mapping between the TC and
queues obtained by rte_eth_dev_get_dcb_info() is still old queue
numbers (old queue numbers are greater than new queue numbers).
In this case, the segment fault happens. So rte_eth_dev_configure()
should be called again to update the mapping between the TC and
queues before rte_eth_dev_get_dcb_info().
Like:
set nbcore 4
port stop all
port config 0 dcb vt off 4 pfc on
port start all
port stop all
port config all rxq 8
port config all txq 8
Fixes: 900550de04 ("app/testpmd: add dcb support")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
For the DCB forwarding test, each core is assigned to each traffic class.
Number of forwarding cores for DCB test must be equal or less than number
of total TC. Otherwise, the following problems may occur:
1/ Redundant polling threads will be created when forwarding cores number
is greater than total TC number.
2/ Two cores would try to use a same queue on a port when Rx/Tx queue
number is greater than the used TC number, which is not allowed.
Fixes: 900550de04 ("app/testpmd: add dcb support")
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
The --txpkts command line parameter was silently ignored due to
application was unable to check the Tx queue ring sizes for non
configured ports.
The "set txpkts <len0[,len1]*>" was also rejected if there
was some stopped or /unconfigured port.
This provides the following:
- If fails to get ring size from the port, this can be because port is
not initialized yet, ignore the check and just be sure segment size
won't cause an out of bound access. The port descriptor check will
be done during Tx setup.
- The capability to send single packet is supposed to be very basic
and always supported, the setting segment number to 1 is always
allowed, no check performed
- At the moment of Tx queue setup the descriptor number is checked
against configured segment number
Bugzilla ID: 584
Fixes: 8dae835d88 ("app/testpmd: remove restriction on Tx segments set")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch supports display queue state in "show rxq/txq" commands.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the create/del policy CLIs to support actions per color.
The CLIs are:
Create: add port meter policy (port_id) (policy_id) g_actions (actions)
y_actions (actions) r_actions (actions)
Delete: del port meter policy (port_id) (policy_id)
Examples:
testpmd> add port meter policy 0 1 g_actions rss / end y_actions end
r_actions drop / end
testpmd> del port meter policy 0 1
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The command line for testing connection tracking is added. To create
a conntrack object, 3 parts are needed.
set conntrack com peer ...
set conntrack orig scale ...
set conntrack rply scale ...
This will create a full conntrack action structure for the indirect
action. After the indirect action handle of "conntrack" created, it
could be used in the flow creation. Before updating, the same
structure is also needed together with the update command
"conntrack_update" to update the "dir" or "ctx".
After the flow with conntrack action created, the packet should jump
to the next flow for the result checking with conntrack item. The
state is defined with bits and a valid combination could be
supported.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch adds link autoneg status display in port_infos_display().
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Right now, rte_flow_shared_action_* APIs are used for some shared
actions, like RSS, count. The shared action should be created before
using it inside a flow. These shared actions sometimes are not
really shared but just some indirect actions decoupled from a flow.
The new functions rte_flow_action_handle_* are added to replace
the current shared functions rte_flow_shared_action_*.
There are two types of flow actions:
1. the direct (normal) actions that could be created and stored
within a flow rule. Such action is tied to its flow rule and
cannot be reused.
2. the indirect action, in the past, named shared_action. It is
created from a direct actioni, like count or rss, and then used
in the flow rules with an object handle. The PMD will take care
of the retrieve from indirect action to the direct action
when it is referenced.
The indirect action is accessed (update / query) w/o any flow rule,
just via the action object handle. For example, when querying or
resetting a counter, it could be done out of any flow using this
counter, but only the handle of the counter action object is
required.
The indirect action object could be shared by different flows or
used by a single flow, depending on the direct action type and
the real-life requirements.
The handle of an indirect action object is opaque and defined in
each driver and possibly different per direct action type.
The old name "shared" is improper in a sense and should be replaced.
Since the APIs are changed from "rte_flow_shared_action*" to the new
"rte_flow_action_handle*", the testpmd application code and command
line interfaces also need to be updated to do the adaption.
The testpmd application user guide is also updated. All the "shared
action" related parts are replaced with "indirect action" to have a
correct explanation.
The parameter of "update" interface is also changed. A general
pointer will replace the rte_flow_action struct pointer due to the
facts:
1. Some action may not support fields updating. In the example of a
counter, the only "update" supported should be the reset. So
passing a rte_flow_action struct pointer is meaningless and
there is even no such corresponding action struct. What's more,
if more than one operations should be supported, for some other
action, such pointer parameter may not meet the need.
2. Some action may need conditional or partial update, the current
parameter will not provide the ability to indicate which part(s)
to update.
For different types of indirect action objects, the pointer could
either be the same of rte_flow_action* struct - in order not to
break the current driver implementation, or some wrapper
structures with bits as masks to indicate which part to be
updated, depending on real needs of the corresponding direct
action. For different direct actions, the structures of indirect
action objects updating will be different.
All the underlayer PMD callbacks will be moved to these new APIs.
The RTE_FLOW_ACTION_TYPE_SHARED is kept for now in order not to
break the ABI. All the implementations are changed by using
RTE_FLOW_ACTION_TYPE_INDIRECT.
Since the APIs are changed from "rte_flow_shared_action*" to the new
"rte_flow_action_handle*" and the "update" interface's 3rd input
parameter is changed to generic pointer, the mlx5 PMD that uses these
APIs needs to do the adaption to the new APIs as well.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add support for single flow dump.
The CLIs to dump one rule: flow dump PORT rule ID
to dump all: flow dump PORT all
Examples:
testpmd> flow dump 0 all
testpmd> flow dump 0 rule 0
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Previous implementations support dump all the flows. Add new arg
rte_flow in rte_flow_dev_dump to dump one flow.
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
In current design, legacy parser rte_devargs_parse() saved scratch
buffer to devargs.args while new parser rte_devargs_layers_parse() saved
to devargs.data. Code using devargs had to know the difference and
cleaned up memory accordingly - error prone.
This patch unifies scratch buffer to data field, introduces
rte_devargs_reset() function to wrap the memory clean up logic.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Reviewed-by: Gaetan Rivet <grive@u256.net>
1/ Improve portability by avoiding use of non-standard 'uint'.
Use uint8_t for hash_key_len as rss_key_len is a uint8_t type.
This solves following build error when building with musl libc:
app/test-pmd/testpmd.h:813:29: error: unknown type name 'uint'
2/ In musl libc, stdout is of type (FILE * const).
Because of the const qualifier, a dark magic cast
must be achieved through uintptr_t.
Fixes: 8205e241b2 ("app/testpmd: add missing type to RSS hash commands")
Fixes: e977e4199a ("app/testpmd: add commands to load/unload BPF filters")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Reviewed-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch checks return value for rte_eth_dev_info_get() in show_macs().
Coverity issue: 353629
Fixes: e1d44d0ad6 ("app/testpmd: show MAC addresses added to a port")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
"show port cap all|<port_id>" was to display offload configuration of
port(s).
But later two other commands added to show same information in more
accurate way:
show port (port_id) rx_offload configuration
show port (port_id) tx_offload configuration
These new commands can both show port and queue level configuration,
also with their capabilities counterparts easier to see offload
capability and configuration of the port in similar syntax.
So the functionality is duplicated and removing this version, to favor
the new commands.
Another problem with this command is it requires each new offload to be
added into the function to display them, and there were missing offloads
that are not displayed, this requirement for sure will create gaps by
time as new offloads added.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Shared age action query was implemented as part of flow query,
but was not implemented as part of shared action query.
This patch adds the required implementation.
Fixes: 2f622174bf ("app/testpmd: support query of age action")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When the max rx packet length is smaller than the sum of mtu size and
ether overhead size, it should be enlarged, otherwise the VLAN packets
will be dropped.
Removed the rx_offloads assignment for jumbo frame during command line
parsing, and set the correct jumbo frame flag if MTU size is larger than
the default value 'RTE_ETHER_MTU' within 'init_config()'.
Fixes: 384161e006 ("app/testpmd: adjust on the fly VLAN configuration")
Fixes: 35b2d13fd6 ("net: add rte prefix to ether defines")
Fixes: ce17eddefc ("ethdev: introduce Rx queue offloads API")
Fixes: 150c9ac2df ("app/testpmd: update Rx offload after setting MTU")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Start from index 0 when going through the FEC array. This will allow
"off" to get printed for RTE_ETH_FEC_NOFEC mode.
Fixes: b19da32e31 ("app/testpmd: add FEC command")
Cc: stable@dpdk.org
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, the queue stats mapping has the following problems:
1) Many PMD drivers don't support queue stats mapping. But there is no
failure message after executing the command "set stat_qmap rx 0 2 2".
2) Once queue mapping is set, unrelated and unmapped queues are also
displayed.
3) The configuration result does not take effect or can not be queried
in real time.
4) The mapping arrays, "tx_queue_stats_mappings_array" &
"rx_queue_stats_mappings_array" are global and their sizes are based
on fixed max port and queue size assumptions.
5) These record structures, 'map_port_queue_stats_mapping_registers()'
and its sub functions are redundant for majority of drivers.
6) The display of the queue stats and queue stats mapping is mixed
together.
Since xstats is used to obtain queue statistics, we have made the
following simplifications and adjustments:
1) If PMD requires and supports queue stats mapping, configure to driver
in real time by calling ethdev API after executing the command "set
stat_qmap rx/tx ...". If not, the command can not be accepted.
2) Based on the above adjustments, these record structures,
'map_port_queue_stats_mapping_registers()' and its sub functions can
be removed. "tx-queue-stats-mapping" & "rx-queue-stats-mapping"
parameters, and 'parse_queue_stats_mapping_config()' can be removed
too.
3) remove display of queue stats mapping in 'fwd_stats_display()' &
'nic_stats_display()', and obtain queue stats by xstats. Since the
record structures are removed, 'nic_stats_mapping_display()' can be
deleted.
Fixes: 4dccdc789b ("app/testpmd: simplify handling of stats mappings error")
Fixes: 013af9b6b6 ("app/testpmd: various updates")
Fixes: ed30d9b691 ("app/testpmd: add stats per queue")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch defines new RSS offload types for eCPRI. For eCPRI with
Message Type 0, the hash field is physical channel ID.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When an age action becomes aged-out the next call for
rte_flow_get_aged_flows API should return the action context supplied
by the action configuration structure.
In case the age action is created by the shared action API, the shared
action context of the Testpmd application was not set.
In addition, the application handler of the contexts returned by the
rte_flow_get_aged_flows API didn't consider the fact that the action
could be set by the shared action API and considered it as regular flow
context.
This caused a crash in Testpmd when the context is parsed.
This patch set context type in the flow and shared action context and
uses it to parse the aged-out contexts correctly.
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Dekel Peled <dekelp@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
