It isn't necessary to use rte_bus_find_by_name() to find a reference to
our own bus.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Instead of getting the name from the devargs lets take it from the
rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
NXP Copyright has been wrongly worded with '(c)' at various places.
This patch removes these extra characters. It also removes
"All rights reserved".
Only NXP copyright syntax is changed. Freescale copyright is not
modified.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
vaddvq_u16() is not available for armv7.
Emulate the vaddvq_u16() using armv7 NEON intrinsics.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
From documentation it is very unclear how VMDq configuration can be
tweaked, and online search offer very poor results.
This patch will ultimately spawn an online documentation page
for the rte_eth_vmdq_rx_conf struct which will eventually add a bit of
documentation about the rx_mode tag and how to allow e.g. VMDq pools
to receive packets without VLAN tags.
Signed-off-by: Tom Barbette <tom.barbette@ulg.ac.be>
Acked-by: John McNamara <john.mcnamara@intel.com>
In order to be able to replicate a configuration onto a second port,
device configuration should be fully described and available.
Other configuration items (i.e. MAC addresses) are stored within
rte_eth_dev_data, but not this one.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This trivial patch removes wrong comments about
the return value of the rte_bus_dump(), as
this method does not return any value
(it's return type is void)
Fixes: a97725791e ("bus: introduce bus abstraction")
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Virtual device/driver probing done via name.
A new alternative method introduced to probe the device with providing
driver name in devargs as "driver=<driver_name>".
This patch removes alternative method and fixes virtual device usages
with proper device names.
Fixes: 87c3bf29c6 ("test: do not short-circuit null device creation")
Fixes: d39670086a ("eal: parse driver argument before probing drivers")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
In this patch, we introduce five APIs to support TCP/IPv4 GRO.
- gro_tcp4_reassemble: reassemble an inputted TCP/IPv4 packet.
- gro_tcp4_tbl_create: create a TCP/IPv4 reassembly table, which is used
to merge packets.
- gro_tcp4_tbl_destroy: free memory space of a TCP/IPv4 reassembly table.
- gro_tcp4_tbl_pkt_count: return the number of packets in a TCP/IPv4
reassembly table.
- gro_tcp4_tbl_timeout_flush: flush timeout packets from a TCP/IPv4
reassembly table.
TCP/IPv4 GRO API assumes all inputted packets are with correct IPv4
and TCP checksums. And TCP/IPv4 GRO API doesn't update IPv4 and TCP
checksums for merged packets. If inputted packets are IP fragmented,
TCP/IPv4 GRO API assumes they are complete packets (i.e. with L4
headers).
In TCP/IPv4 GRO, we use a table structure, called TCP/IPv4 reassembly
table, to reassemble packets. A TCP/IPv4 reassembly table includes a key
array and a item array, where the key array keeps the criteria to merge
packets and the item array keeps packet information.
One key in the key array points to an item group, which consists of
packets which have the same criteria value. If two packets are able to
merge, they must be in the same item group. Each key in the key array
includes two parts:
- criteria: the criteria of merging packets. If two packets can be
merged, they must have the same criteria value.
- start_index: the index of the first incoming packet of the item group.
Each element in the item array keeps the information of one packet. It
mainly includes three parts:
- firstseg: the address of the first segment of the packet
- lastseg: the address of the last segment of the packet
- next_pkt_index: the index of the next packet in the same item group.
All packets in the same item group are chained by next_pkt_index.
With next_pkt_index, we can locate all packets in the same item
group one by one.
To process an incoming packet needs three steps:
a. check if the packet should be processed. Packets with one of the
following properties won't be processed:
- FIN, SYN, RST, URG, PSH, ECE or CWR bit is set;
- packet payload length is 0.
b. traverse the key array to find a key which has the same criteria
value with the incoming packet. If find, goto step c. Otherwise,
insert a new key and insert the packet into the item array.
c. locate the first packet in the item group via the start_index in the
key. Then traverse all packets in the item group via next_pkt_index.
If find one packet which can merge with the incoming one, merge them
together. If can't find, insert the packet into this item group.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Generic Receive Offload (GRO) is a widely used SW-based offloading
technique to reduce per-packet processing overhead. It gains
performance by reassembling small packets into large ones. This
patchset is to support GRO in DPDK. To support GRO, this patch
implements a GRO API framework.
To enable more flexibility to applications, DPDK GRO is implemented as
a user library. Applications explicitly use the GRO library to merge
small packets into large ones. DPDK GRO provides two reassembly modes.
One is called lightweight mode, the other is called heavyweight mode.
If applications want to merge packets in a simple way and the number
of packets is relatively small, they can use the lightweight mode.
If applications need more fine-grained controls, they can choose the
heavyweight mode.
rte_gro_reassemble_burst is the main reassembly API which is used in
lightweight mode and processes N packets at a time. For applications,
performing GRO in lightweight mode is simple. They just need to invoke
rte_gro_reassemble_burst. Applications can get GROed packets as soon as
rte_gro_reassemble_burst returns.
rte_gro_reassemble is the main reassembly API which is used in
heavyweight mode and tries to merge N inputted packets with the packets
in GRO reassembly tables. For applications, performing GRO in heavyweight
mode is relatively complicated. Before performing GRO, applications need
to create a GRO context object, which keeps reassembly tables of
desired GRO types, by rte_gro_ctx_create. Then applications can use
rte_gro_reassemble to merge packets. The GROed packets are in the
reassembly tables of the GRO context object. If applications want to get
them, applications need to manually flush them by flush API.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Introduce a more versatile helper to parse device strings. This
helper expects a generic rte_devargs structure as storage in order not
to require API changes in the future, should this structure be
updated.
The old equivalent function is thus being deprecated, as its API does
not allow to accompany rte_devargs evolutions.
A deprecation notice is issued.
This new helper will parse bus information as well as device name and
device parameters. It does not allocate an rte_devargs structure and
expects one to be given as input.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
rte_devargs now represents any device from any bus.
The related devtypes do not identify a bus anymore, only which scan
policy the device subscribes to.
The bus itself is identified by a bus handle previously introduced.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Remove the dependency of this subsystem upon bus specific device
representation.
Devargs only validates that a device declaration is correct and handled
by a bus. The device interpretation is done afterward within the bus.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Scan policies describe the way a bus should scan the system to search
for possible devices.
Three flags are introduced:
RTE_BUS_SCAN_UNDEFINED: Configuration is irrelevant for this bus
RTE_BUS_SCAN_WHITELIST: Scanning should be limited to declared devices
RTE_BUS_SCAN_BLACKLIST: Scanning should exclude only declared devices
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Device kernel module is a device attribute.
It is used in generic device structures and must not be tied to a bus.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Find which bus should be able to parse this device name into an internal
device representation.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This operation can be used either to validate that a device
representation can be understood by a bus, as well as store the resulting
specialized device representation in any format determined by the bus.
Implementing this function allows EAL initialization routines to infer
which bus should handle a device. This is used as a way to respect
backward compatibility.
This API will disappear once this compatibility is not enforced anymore.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The bus name was stored with embedded double quotes.
Indeed the bus name is given with a string in a macro,
which is not used elsewhere.
These macros are useless because the buses are drivers,
so they must not have any API for the application writer.
The registration can be done with a hardcoded value without quotes.
There is another (small) benefit of not using macros for driver names:
it is to have a meaningful constructor function name.
For instance, it was businitfn_PCI_BUS_NAME instead of businitfn_pci.
The bus registration macro is also changed to use
the new RTE_INIT_PRIO macro, similar to RTE_INIT used for other drivers.
The priority is the highest (101) in order to be sure that the bus driver
is registered before its device drivers.
Fixes: 0fd1a0eaae ("pci: add bus driver")
Fixes: fea892e35f ("bus/vdev: use standard bus registration")
Fixes: 7e7df6d0a4 ("bus/fslmc: introduce fsl-mc bus driver")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
A separate boolean variable is not necessary when searching for
starting point in find_device. Just use the passed argument
as its own flag value.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When adding items to a hash table with multiple threads,
there is an spinlock used to prevent data corruption
(unless Transactional Memory is supported).
If there is a failure, the spinlock should be released,
but there were cases where that was not happening.
Fixes: be856325cb ("hash: add scalable multi-writer insertion with Intel TSX")
Cc: stable@dpdk.org
Signed-off-by: Mike Stolarchuk <mike.stolarchuk@bigswitch.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Check that numbers of Rx and Tx descriptors satisfy descriptors limits
from the Ethernet device information, otherwise adjust them to boundaries.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Fix document for fuzzy match and GRE
Fixes: a3a2e2c8f7 ("ethdev: add fuzzy match in flow API")
Fixes: 7cd048321d ("ethdev: add MPLS and GRE flow API items")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This allows PMDs and applications to save flow rules in their generic
format for later processing. This is useful when rules cannot be applied
immediately, such as when the device is not properly initialized.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add in a new rte_event_ring structure type and functions to allow events to
be passed core to core. This is needed because the standard rte_ring type
only works on pointers, while for events, we want to copy the entire, 16B
events themselves - not just pointers to them. The code makes extensive use
of the functions already defined in rte_ring.h
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The rte_rings traditionally have only supported having ring sizes as powers
of 2, with the actual usable space being the size - 1. In some cases, for
example, with an eventdev where we want to precisely control queue depths
for latency, we need to allow ring sizes which are not powers of two so we
add in an additional ring capacity value to allow that. For existing rings,
this value will be size-1, i.e. the same as the mask, but if the new
EXACT_SZ flag is passed on ring creation, the ring will have exactly the
usable space requested, although the underlying memory size may be bigger.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Introducing the rte_event_enqueue_new_burst() for enabling the
PMD, an optimization opportunity to optimize if all the events in
the enqueue burst has the op type of RTE_EVENT_OP_FORWARD.
If a PMD does not have any optimization opportunity
for this operation then the PMD can choose the generic enqueue
burst PMD callback as the fallback.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Introducing the rte_event_enqueue_new_burst() for enabling the
PMD, an optimization opportunity to optimize if all the events in
the enqueue burst has the op type of RTE_EVENT_OP_NEW.
If a PMD does not have any optimization opportunity
for this operation then the PMD can choose the generic enqueue
burst PMD callback as the fallback.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Introducing a helper function to avoid duplicating
common enqueue burst code when introducing
enqueue burst variants.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Since now the private session data is initialized after
the session pool is created, there is no need to keep
this PMD function.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The session mempool pointer is needed in each queue pair,
if session-less operations are being handled.
Therefore, the API is changed to accept this parameter,
as the session mempool is created outside the
device configuration function, similar to what ethdev
does with the rx queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Change crypto device's session management to make it
device independent and simplify architecture when session
is intended to be used on more than one device.
Sessions private data is agnostic to underlying device
by adding an indirection in the sessions private data
using the crypto driver identifier.
A single session can contain indirections to multiple device types.
New function rte_cryptodev_sym_session_init has been created,
to initialize the driver private session data per driver to be
used on a same session, and rte_cryptodev_sym_session_clear
to clear this data before calling rte_cryptodev_sym_session_free.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Mempool pointer can be obtained from the object itself,
which means that it is not required to actually store the pointer
in the session.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since crypto session will not be attached to a specific
device or driver, the field driver_id is not required
anymore (only used to check that a session was being
handled by the right device).
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Device id is necessary in the crypto session,
as it was only used for the functions that attach/detach
a session to a queue pair.
Since the session is not going to be attached to a device
anymore, this is field is no longer necessary.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Device id is going to be removed from session,
as the session will be device independent.
Therefore, the functions that attach/dettach a session
to a queue pair need to be updated, to accept the device id
as a parameter, apart from the queue pair id and the session.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of creating the session mempool while configuring
the crypto device, apps will create the mempool themselves.
This way, it gives flexibility to the user to have a single
mempool for all devices (as long as the objects are big
enough to contain the biggest private session size) or
separate mempools for different drivers.
Also, since the mempool is now created outside the
device configuration function, now it needs to be passed
through this function, which will be eventually passed
when setting up the queue pairs, as ethernet devices do.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Provide a function to get the private session size
of any crypto device (specifically, to its crypto driver).
This will be useful once the session mempool is created
outside the library.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Prior to removing the session pool creation from cryptodev
configure function, session init function needs to be
separated from the pool creation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Cryptodev session structure was a duplication of the
cryptodev symmetric structure.
It was used by some PMDs that should use the symmetric
structure instead.
Since this structure was internal, there is no deprecation
notice required.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Remove crypto device driver name string definitions from librte_cryptodev,
which avoid to library changes every time a new crypto driver was added.
The driver name is predefined internaly in the each PMD.
The applications could use the crypto device driver names based on
options with the driver name string provided in command line.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Changes device type identification to be based on a unique
driver id replacing the current device type enumeration, which needed
library changes every time a new crypto driver was added.
The driver id is assigned dynamically during driver registration using
the new macro RTE_PMD_REGISTER_CRYPTO_DRIVER which returns a unique
uint8_t identifier for that driver. New APIs are also introduced
to allow retrieval of the driver id using the driver name.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
while registering driver to dpaa2, hard coded string is used.
It is now updated as per the latest changes in string name.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Now that AAD is only used in AEAD algorithms,
there is no need to keep AAD in the authentication
structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
