Created sub Makefile for tf_ulp and and tf_core for easy management.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Issue has been observed where packets are getting dropped
at DMAC filtering if a new dmac address is added before
starting of port.
Fixes: c43adf6168 ("net/octeontx2: add unicast MAC filter")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Expand vector PMD support to aarch32.
Enable i40e PMD by default for armv7 make build.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The include of 'arm_neon.h' causes issues to old gcc and aarch32.
Including 'rte_vect.h' instead fixes these issues.
Fixes: b20971b6cc ("net/ixgbe: implement vector driver for ARM")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Expand vector PMD support to aarch32.
Enable ixgbe PMD by default for armv7 make build.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Caught by code inspection, for a non-EAL thread identified with
rte_lcore_id() == LCORE_ID_ANY, the code currently arbitrarily uses
lcore 0 while there is no guarantee this lcore is used.
Fixes: 3588aaa68e ("net/mrvl: fix HIF objects allocation")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Liron Himi <lironh@marvell.com>
After enabling promiscuous mode all packets whose destination MAC
address is a multicast address were being dropped. This fix configures
H/W to receive all traffic in promiscuous mode. Promiscuous mode also
overrides allmulticast mode on/off status.
Fixes: 40e9f6fc15 ("net/qede: enable VF-VF traffic with unmatched dest address")
Cc: stable@dpdk.org
Signed-off-by: Devendra Singh Rawat <dsinghrawat@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
New cn98xx SOC comes up with two NIX blocks wrt
cn96xx, cn93xx, to achieve higher performance.
Also the no of cores increased to 36 from 24.
Adding support for cn98xx where need a logic to
detect if the LF is attached to NIX0 or NIX1 and
then accordingly use the respective NIX block.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The new kernel adds the names like "pf0" for Host PCI physical
function representor on Bluefield SmartNIC hosts. This patch
provides correct HPF representor recognition over the kernel
versions 5.7 and laters.
The following port naming formats are supported:
- missing physical port name (no sysfs/netlink key) at all,
master is assumed
- decimal digits (for example "12"), representor is
assumed, the value is the index of attached VF
- "p" followed by decimal digits, for example "p2", master
is assumed
- "pf" followed by PF index, for example "pf0", Host PF
representor is assumed on SmartNIC systems.
- "pf" followed by PF index concatenated with "vf" followed by
VF index, for example "pf0vf1", representor is assumed.
If index of VF is "-1" it is a special case of Host PF
representor, this representor must be indexed in devargs
as 65535, for example representor=[0-3,65535] will
allow representors for VF0, VF1, VF2, VF3 and for host PF.
Fixes: 79aa430721 ("common/mlx5: split common file under Linux directory")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Initialize and update RSS configure based on user request
(rte_eth_rss_conf) from dev_configure and .rss_hash_update ops.
All previous default configure has been removed.
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The creation of DBR can be used by a number of different
Mellanox PMDs. for example RegEx / Net / VDPA.
This commits moves the DBR creation and release functions to common
folder.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Getter functions such as: 'mlx5_os_get_ctx_device_name',
'mlx5_os_get_ctx_device_path', 'mlx5_os_get_dev_device_name',
'mlx5_os_get_umem_id' are implemented under net directory. To enable
additional devices (e.g. regex, vdpa) to access these getter functions
they are moved under common directory.
As part of this commit string sizes DEV_SYSFS_NAME_MAX and
DEV_SYSFS_PATH_MAX are increased by 1 to make sure that the destination
string size in strncpy() function is bigger than the source string size.
This update will avoid GCC version 8 error -Werror=stringop-truncation.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, when allocate a new counter, it needs loop the whole
container pool list to get a free counter.
In the case with millions of counters allocated, and all the pools
are empty, allocate the new counter will still need to loop the
whole container pool list first, then allocate a new pool to get a
free counter. It wastes the cycles during the pool list traversal.
Add a global free counter list in the container helps to get the free
counters more efficiently.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
For single counter, when allocate a new counter, it needs to find the pool
it belongs in order to do the query together.
Once there are millions of counters allocated, the pool array in the
counter container will become very large. In this case, the pool search
from the pool array will become extremely slow.
Save the minimum and maximum counter ID to have a quick check of current
counter ID range. And start searching the pool from the last pool in the
container will mostly get the needed pool since counter ID increases
sequentially.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, to check if any shared counter with same ID existing, it will
have to loop the counter pools to search for the counter. Even add the
counter to the list will also not so helpful while there are thousands
of shared counters in the list.
Change Three-Level table to look up the counter index saved in the
relevant table entry will be more efficient.
This patch introduces the Three-level table to save the ID relevant
counter index in the table. Then the next while the same ID comes, just
check the table entry of this ID will get the counter index directly.
No search will be needed.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
For the case which data is linked with sequence increased index, the
array table will be more efficient than hash table once need to search
one data entry in large numbers of entries. Since the traditional hash
tables has fixed table size, when huge numbers of data saved to the hash
table, it also comes lots of hash conflict.
But simple array table also has fixed size, allocates all the needed
memory at once will waste lots of memory. For the case don't know the
exactly number of entries will be impossible to allocate the array.
Then the multiple level table helps to balance the two disadvantages.
Allocate a global high level table with sub table entries at first,
the global table contains the sub table entries, and the sub table will
be allocated only once the corresponding index entry need to be saved.
e.g. for up to 32-bits index, three level table with 10-10-12 splitting,
with sequence increased index, the memory grows with every 4K entries.
The currently implementation introduces 10-10-12 32-bits splitting
Three-Level table to help the cases which have millions of entries to
save. The index entries can be addressed directly by the index, no
search will be needed.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Some configuration of the mlx5 port are done by the kernel net device
associated to the IB device represents the PCI device.
The DPDK mlx5 driver uses Linux system calls, for example ioctl, in
order to configure per port configurations requested by the DPDK user.
One of the basic knowledges required to access the correct kernel net
device is its name.
Move function to get interface name from IB device path to the common
library.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Replacing flow profile locks with RSS profile locks in the function to
remove all RSS rules for a given VSI. This is to align the locks used
for RSS rule addition to VSI and removal during VSI teardown to avoid
a race condition owing to several iterations of the above operations.
In function to get RSS rules for given VSI and protocol header replacing
the pointer reference of the RSS entry with a copy of hash value to
ensure thread safety.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
set_rss_lut failed due to incorrect vsi_id mask. vsi_id is 10 bit
but mask was 0x1FF whereas it should be 0x3FF.
For vsi_num >= 512, FW set_rss_lut has been failing with return code
EACCESS (vsi ownership issue) because software was providing
incorrect vsi_num (dropping 10th bit due to incorrect mask) for
set_rss_lut admin command
Fixes: a90fae1d07 ("net/ice/base: add admin queue structures and commands")
Cc: stable@dpdk.org
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
In order to find proper dummy packets for switch filter,
it need to check ipv4 next protocol number, if it is 0x06,
which means next payload is TCP, we need to use TCP
format dummy packet.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch add support to get tunnel type of recipe
after get recipe from FW. This will fix the issue in
function ice_find_recp() for tunnel type comparing.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add FDIR support for MAC_IPV6_GTPU type with outer IPv6 address, teid
and qfi fields matching.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The grst_delay variable in ice_check_reset contains the maximum time
(in 100 msec units) that the driver will wait for a reset event to
transition to the Device Active state. The value is the sum of three
separate components:
1) The maximum time it may take for the firmware to process its
outstanding command before handling the reset request.
2) The value in RSTCTL.GRSTDEL (the delay firmware inserts between first
seeing the driver reset request and the actual hardware assertion).
3) The maximum expected reset processing time in hardware.
Referring to this total time as "grst_delay" is misleading and
potentially confusing to someone checking the code and cross-referencing
the hardware specification.
Fix this by renaming the variable to "grst_timeout", which is more
descriptive of its actual use.
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
System diagnostic solution extend the ability to fetch FW
internal status data and error indication.
Signed-off-by: Sharon Haroni <sharon.haroni@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add outer IP address fields while generating the training packets for
GTPU, so that we can support FDIR based on outer IP of GTPU.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The ice_discover_caps function is used to read the device and function
capabilities, updating the hardware capabilities structures with
relevant data.
The exact number of capabilities returned by the hardware is unknown
ahead of time. The AdminQ command will report the total number of
capabilities in the return buffer.
The current implementation involves requesting capabilities once,
reading this returned size, and then re-requested with that size.
This isn't really necessary. The firmware interface has a maximum size
of ICE_AQ_MAX_BUF_LEN. Firmware can never return more than
ICE_AQ_MAX_BUF_LEN / sizeof(struct ice_aqc_list_caps_elem) capabilities.
Avoid the retry loop by simply allocating a buffer of size
ICE_AQ_MAX_BUF_LEN. This is significantly simpler than retrying. The
extra allocation isn't a big deal, as it will be released after we
finish parsing the capabilities.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The profile id map lock should be held till the caller completes
all references of that profile entries.
The current code releases the lock right after the match search.
This caused a driver issue when the profile map entries were
referenced after it was freed in other thread after the lock was
released earlier.
Also return type of get/set profile functions were changed to
return the ice status instead of the profile entry pointer.
This will prevent the caller referencing the profile fields
outside the lock.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Some places were calling the meson function host_machine.system()
instead of the variables is_windows and is_linux defined
in config/meson.build.
At the same time, the missing "Linux restriction" reason is added to
pfe and octeontx2 crypto PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Disable all unused firmware resources during init time to give
more resources for HASH (exact-match) filter region and always
request firmware to enable HASH filter support when resources
are available.
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Create a set of verbs callbacks in 'struct mlx5_verbs_ops'
and add MR operations to it (file net/mlx5/linux/mlx5_verbs.c).
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Prior to this commit MR operations were verbs based and hard coded under
common/mlx5/linux directory. This commit enables upper layers (e.g.
net/mlx5) to determine which MR operations to use. For example the net
layer could set devx based MR operations in non-Linux environments. The
reg_mr and dereg_mr callbacks are added to the global per-device MR
cache 'struct mlx5_mr_share_cache'.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
commit 536db938a4 ("net/cxgbe: add devargs to control filtermode and
filtermask") allows configuring hardware to select specific combination
of header fields to match in the incoming packets. However, the default
mask is set for all fields in the requested pattern items, even if the
field is not explicitly set in the combination and results in
validation errors. To prevent this, ignore setting the default masks
for the unrequested fields and the hardware will also ignore them in
validation, accordingly. Also, tweak the filter spec before finalizing
the masks.
Fixes: 536db938a4 ("net/cxgbe: add devargs to control filtermode and filtermask")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Free up Source MAC Table (SMT) entry properly during filter create
failure and filter delete.
Fixes: 993541b2fa ("net/cxgbe: support flow API for source MAC rewrite")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The Multi Port Switch (MPS) entry is allocated twice when both
flow validate and create are invoked, but only freed once during
flow destroy. Avoid double alloc by moving MPS entry allocation
closer to when the filter create request is sent to hardware and
will be ignored for filter validate request.
Fixes: fefee7a619 ("net/cxgbe: add flow ops to match based on dest MAC")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Free up Compressed Local IP (CLIP) entry properly during filter
creation failure path. Also consolidate all various tables
cleanup to a common function and invoke it from both wild-card
and exact-match filter paths.
Fixes: af44a57798 ("net/cxgbe: support to offload flows to HASH region")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Remove PPPoD's packet type from PPPoE's ptype bitmap.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
In the flow API, add ability to add IPV4/IPV6 rules that match on
packets with or without inner L4 protocols.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
There isn't a case for 1G SGMII in ice_get_media_type() so add
the handling for it.
Also handle the special case where some direct attach
cables may report that they support 1G SGMII, but
that is erroneous since SGMII is supposed to be a
backplane media type (between a MAC and a PHY). If
the driver doesn't handle this special case then a
user could see the 'Port' in ethtool change from
'Direct attach Copper' to 'Backplane' when they have
forced the speed to 1G, but the cable hasn't changed.
Lastly, change ice_aq_get_phy_caps() to save the
module_type info if the function was called with
ICE_AQC_REPORT_TOPO_CAP. This call uses the media
information to populate the module_type. If no
media is present then the values in module_type
will be 0.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch add initialization for prof_res_bm_init flag
to zero in order that the possible resource for field vector
in the package file can be initialized.(in ice_init_prof_result_bm)
Fixes: 453d087cca ("net/ice/base: add common functions")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch add more tunnel type definition ipv4/ipv6 packet,
it enable tcp/udp layer of ipv4/ipv6 as L4 payload but without
L4 dst/src port number as input set for switch filter rule.
For example:
we can download a switch rule to direct ipv4 packet with specific
source and destination ip address to queue index 1.
"eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / udp /
end actions queue index 1 / end"
this type of rule will be matched with ipv4/udp file only.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The parameter ref_cnt is used for tracking how many
rules are reusing this VSI list, so it can only be
updated when a rule which using this list be deleted.
Fixes: f89aa3affa ("net/ice/base: support removing advanced rule")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
When free vsi list resource after vsi list update to empty, some
useless code in function ice_remove_vsi_list_rule() should be deleted.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add support for LLDP forwarding to SW programming in FW
LLDP Filter Control is 0x0A0A.
Signed-off-by: Sharon Haroni <sharon.haroni@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Distribute the tx queues evenly across all queue groups. This will
help the queues to get more equal sharing among the queues when all
are in use.
In the previous algorithm, the next queue group node will be picked up
only after the previous one filled with max children.
For example: if VSI is configured with 9 queues, the first 8 queues
will be assigned to queue group 1 and the 9th queue will be assigned to
queue group 2.
The 2 queue groups split the bandwidth between them equally (50:50).
The first queue group node will share the 50% bandwidth with all of
its children (8 queues). And the second queue group node will share
the entire 50% bandwidth with its only children.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
By default the queues are configured in legacy mode. The default
bandwidth settings for legacy/advanced modes are different. The existing
code was using the advanced mode default value of 1 which was
incorrect. This caused the unbalanced BW sharing among siblings.
The recommended default value is applied.
Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
