This patch adds versioned function rte_cryptodev_info_get()
to prevent some issues with ABI policy.
Node v21 works in same way as before, returning driver capabilities
directly to the API caller. These capabilities may include new elements
not part of the v20 ABI.
Node v20 function maintains compatibility with v20 ABI releases
by stripping out elements not supported in v20 ABI. Because
rte_cryptodev_info_get is called by other API functions,
rte_cryptodev_sym_capability_get function is versioned the same way.
Fixes: b922dbd38c ("cryptodev: add ChaCha20-Poly1305 AEAD algorithm")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds CPU flags which will enable the detection of ISA
features available on more recent x86 based CPUs.
The CPUID leaf information can be found in
Table 1-2. "Information Returned by CPUID Instruction" of this document:
https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf
The following CPU flags are added in this patch:
- AVX-512 doubleword and quadword instructions.
- AVX-512 integer fused multiply-add instructions.
- AVX-512 conflict detection instructions.
- AVX-512 byte and word instructions.
- AVX-512 vector length instructions.
- AVX-512 vector bit manipulation instructions.
- AVX-512 vector bit manipulation 2 instructions.
- Galois field new instructions.
- Vector AES instructions.
- Vector carry-less multiply instructions.
- AVX-512 vector neural network instructions.
- AVX-512 for bit algorithm instructions.
- AVX-512 vector popcount instructions.
- Cache line demote instructions.
- Direct store instructions.
- Direct store 64B instructions.
- AVX-512 two register intersection instructions.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Change references to ABI 20.0.1 to use ABI v21, see
https://doc.dpdk.org/guides/contributing/abi_policy.html#general-guidelines
"Major ABI versions are declared no more frequently than yearly.
Compatibility with the major ABI version is mandatory in subsequent
releases until a new major ABI version is declared."
Combined ABI policy and versioning in maintainers, add map files to the
filter to more closely monitor future ABI changes.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Ignore the internal version ABI check, this kind of ABI is used only
by drivers and libraries.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Introduce the __rte_internal tag to mark internal ABI function which is
used only by the drivers or other libraries.
Like for __rte_experimental, this tag must be on a separate line before
function proprotypes.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
The tracepoint symbols __rte_*_trace_* are defined via a macro,
adding prefix "__", so they cannot be found by map checker.
Those symbols defined by RTE_TRACE_POINT and RTE_TRACE_POINT_FP
are checked in source code without the generated prefix.
The same logic is applied to per core variables, previously skipped.
Fixes: 6c232fc44c ("trace: add generic tracepoints")
Fixes: 4931010619 ("trace: add alarm tracepoints")
Fixes: 52f409d614 ("trace: add memory tracepoints")
Fixes: 402321cfca ("trace: add memzone tracepoints")
Fixes: 0baa1e01c3 ("trace: add thread tracepoints")
Fixes: 05c4105738 ("trace: add interrupt tracepoints")
Fixes: 78d44153de ("ethdev: add tracepoints")
Fixes: 32e326869e ("eventdev: add tracepoints")
Fixes: 4cf30e3f3c ("cryptodev: add tracepoints")
Fixes: 40b75c73d1 ("mempool: add tracepoints")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
One of the reasons to destroy a flow is the fact that no packet matches
the flow for "timeout" time.
For example, when TCP\UDP sessions are suddenly closed.
Currently, there is not any DPDK mechanism for flow aging and the
applications use their own ways to detect and destroy aged-out flows.
The flow aging implementation need include:
- A new rte_flow action: RTE_FLOW_ACTION_TYPE_AGE to set the timeout and
the application flow context for each flow.
- A new ethdev event: RTE_ETH_EVENT_FLOW_AGED for the driver to report
that there are new aged-out flows.
- A new rte_flow API: rte_flow_get_aged_flows to get the aged-out flows
contexts from the port.
- Support input flow aging command line in Testpmd.
The new event type addition in the enum is flagged as an ABI breakage,
so an ignore rule is added for these reasons:
- It is not changing value of existing types (except MAX)
- The new value is not used by existing API if the event is not
registered
In general, it is safe adding new ethdev event types at the end of the
enum, because of event callback registration mechanism.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Introduce relaxed tail sync (RTS) mode for MT ring synchronization.
Aim to reduce stall times in case when ring is used on
overcommited cpus (multiple active threads on the same cpu).
The main difference from original MP/MC algorithm is that
tail value is increased not by every thread that finished enqueue/dequeue,
but only by the last one.
That allows threads to avoid spinning on ring tail value,
leaving actual tail value change to the last thread in the update queue.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
When running make with CONFIG_RTE_BUILD_SHARED_LIB=n,
no shared library is built.
In this case, no need to run ABI check.
With meson, both shared and static libraries are always built.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: David Marchand <david.marchand@redhat.com>
Static builds can take a lot of space, so reduce the number of examples
built when testing those static builds.
As makefile-based build is close to end of life, completely skip examples
in case of static linkage with make.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The keyword __attribute__ will emit a warning,
because it is preferred to use or define a common __rte macro.
The centralized macros may help to control or workaround some compilers.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The arch-specific directories arm, ppc and x86 in common/include/arch/
are moved as include/ sub-directories of respective arch directories:
- arm/include/
- ppc/include/
- x86/include/
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The arch-specific directories arm, ppc and x86 in common/arch/
are moved at the same level as the OS-specific directories.
It makes more clear that EAL is covering a matrix combining OS and arch.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Installing with ninja is quite verbose by default, hide ninja output under
TEST_MESON_BUILD_VERBOSE and TEST_MESON_BUILD_VERY_VERBOSE options.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Fix check symbol change script to detect new diff file when
it is in between "--- /dev/null" to "b/lib/...".
Current awk line expects line to start with "a/..."
which is not always true for all diffs.
As a result if in_map was '1' earlier, it will not be changed
to '0' and we get check patch errors which are not true.
Fixes: 4bec48184e ("devtools: add checks for ABI symbol addition")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Moved title syntax to a separate file so that it improves code
readability and allows easy addition.
Also logic changed from checking for bad pattern to checking good
pattern which documents the expected syntax more clearly, and does not
have gaps in the checks.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
During backporting, if the fixes or stable tag are missing,
it usually requires some investigation by stable maintainer
as to why.
The presence of a fixes tag may be known from whether the
originating release of the issue is printed at the end of the
line but with variable line lengths and nested partial fixes
it doesn't catch the eye.
When there are a large amount of commits, adding an aligned column
indicating the presence of a fixes tag beside the stable one makes
it easier to quickly see the patches requiring further investigation.
e.g.
20.02 8f33cbcfa S F net/i40e/base: fix buffer address (16.04)
20.02 4b3da9415 S F net/i40e/base: fix error message (1.7.0)
20.02 1da546c39 - F net/i40e/base: fix missing link modes (17.08)
20.02 79bfe7808 S F net/i40e/base: fix Tx descriptors number (1.7.0)
20.02 50126939c - F net/i40e/base: fix retrying logic (18.02)
20.02 dcd05da0a S F app/testpmd: fix GENEVE flow item (18.02)
20.02 b0b9fdad2 S - net/bnx2x: support secondary process (N/A)
20.02 f8279f47d S F net/netvsc: fix crash in secondary process (18.08)
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
C99-style comments are not permitted according to DPDK coding
style guidelines, enable checking for these by checkpatch.pl.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
We don't provide ABI compatibility for experimental libraries.
Skip those libraries by catching a soname containing a version starting
with '0.'.
Align the special case for the glue libraries by using the soname too.
Once libabigail has support for it, we will have a single type of rule.
Fixes: 777014e56d ("devtools: add ABI checks")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Mellanox owns Tilera and EZchip, so the copyrights can be converted.
At the same time, the license header is switched to SPDX tag format,
and a typo is fixed in another copyright line.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The Linux kernel modules kni and igb_uio were disabled by default
so they need a new option (+kmods) for testing compilation.
Some recent features were not enabled in compilation testing:
- mlx5 vDPA (depends on libibverbs)
- ifpga (depends on libfdt)
- ipn3ke (depends on libfdt)
- Arm WFE
Check on libfdt availability is added, and not considered as a fix.
Fixes: 91a861e541 ("config: disable Linux kernel modules by default")
Fixes: 95276abaaf ("vdpa/mlx5: introduce Mellanox vDPA driver")
Fixes: 1be7855d77 ("eal: add wait until equal API")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Link against Intel IPsec Multi-buffer library, which
added support for SNOW3G-UEA2 and SNOW3G-UIA2 from version v0.53,
moving from libSSO SNOW3G library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Link against Intel IPsec Multi-buffer library, which
added support for KASUMI-F8 and KASUMI-F9 from version v0.53,
moving from libSSO KASUMI library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Link against Intel IPsec Multi-buffer library, which
added support for ZUC-EEA3 and ZUC-EIA3 from version v0.53,
moving from libSSO ZUC library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
For normal developers, those checks are disabled.
Enabling them requires a configuration that will trigger the ABI dumps
generation as part of the existing devtools/test-build.sh and
devtools/test-meson-builds.sh scripts.
Those checks are enabled in the CI for the default meson options on x86
and aarch64 so that proposed patches are validated via our CI robot.
A cache of the ABI is stored in travis jobs to avoid rebuilding too
often.
Checks can be informational only, by setting ABI_CHECKS_WARN_ONLY when
breaking the ABI in a future release.
Explicit suppression rules have been added on internal structures
exposed to crypto drivers as the current ABI policy does not apply to
them.
This could be improved in the future by carefully splitting the headers
content with application and driver "users" in mind.
We currently have issues reported for librte_crypto recent changes for
which suppression rules have been added too.
Mellanox glue libraries are explicitly skipped as they are not part of
the application ABI.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
No functional change intended, prepare for reusing this code.
The config and compilation parts are separated in helpers.
Unsetting CC is moved to the caller of the helper.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Drivers librte_mempool_ring.so and librte_pmd_null.so are loaded by
librte_eal.so when running testpmd.
In Ubuntu Xenial, driver path is installed to RPATH on testpmd. This
allows librte_eal.so to find drivers by using the RPATH.
However, in Ubuntu Bionic, driver path is installed to RUNPATH instead.
The RUNPATH on testpmd is not available by librte_eal.so and therefore
lead to driver load failure:
EAL: Detected 32 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: librte_mempool_ring.so: cannot open shared object file:
No such file or directory
EAL: FATAL: Cannot init plugins
EAL: Cannot init plugins
Add 'drivers' into LD_LIBRARY_PATH so that testpmd can find and make
use of these shared libraries.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
When testing build with +debug options, the statistics are enabled.
It was wrongly matching CONFIG_RTE_IBVERBS_LINK_STATIC.
The pattern is fixed to match only statistics config options.
Fixes: 2c0dd7b69f ("config: add static linkage of mlx dependency")
Cc: stable@dpdk.org
Reported-by: Ali Alnubani <alialnu@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
By default, both test-build.sh and test-meson-builds.sh scripts create the
builds they generate in the current working directory, leading to a large
number of build directories being present when testing patches. This
patchset modifies both scripts to use a DPDK_BUILD_TEST_DIR environment
variable to control where the build outputs are put.
For example, doing:
export DPDK_BUILD_TEST_DIR=__builds
./devtools/test-meson-builds.sh && ./devtools/test-build.sh \
x86_64-native-linux-clang+shared i686-native-linux-gcc
gives a "__builds" directory with 14 meson and 2 make builds (with the
meson build count depending on compiler availability)
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Those scripts are only used by developers and not part of the build
process.
Move them to devtools so they are not installed.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Let's try to check for discrepancies in coverity and bugzilla tags.
The contributing guide specifies that:
- for coverity issues, the tag is 'Coverity issue:'
- for bugzilla issues, the tag is 'Bugzilla ID:'
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Same idea than overriding PATH and PKG_CONFIG_PATH, it can be quite
useful to override compilation flags like CFLAGS, CPPFLAGS and LDFLAGS
for cross compilation or libraries that won't provide a pkg-config file.
Fixes: 2722367412 ("devtools: load target-specific compilation environment")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Following [1], testpmd memory consumption has skyrocketted.
The rte_port structure has gotten quite fat.
struct rte_port {
[...]
struct rte_eth_rxconf rx_conf[65536]; /* 266280 3145728 */
/* --- cacheline 53312 boundary (3411968 bytes) was 40 bytes ago --- */
struct rte_eth_txconf tx_conf[65536]; /* 3412008 3670016 */
/* --- cacheline 110656 boundary (7081984 bytes) was 40 bytes ago --- */
[...]
/* size: 8654936, cachelines: 135234, members: 31 */
[...]
testpmd handles RTE_MAX_ETHPORTS ports (32 by default) which means that it
needs ~256MB just for this internal representation.
The reason is that a testpmd rte_port (the name is quite confusing, as
it is a local type) maintains configurations for all queues of a port.
But where you would expect testpmd to use RTE_MAX_QUEUES_PER_PORT as the
maximum queue count, the rte_port uses MAX_QUEUE_ID set to 64k.
Prefer the ethdev maximum value.
After this patch:
struct rte_port {
[...]
struct rte_eth_rxconf rx_conf[1025]; /* 8240 49200 */
/* --- cacheline 897 boundary (57408 bytes) was 32 bytes ago --- */
struct rte_eth_txconf tx_conf[1025]; /* 57440 57400 */
/* --- cacheline 1794 boundary (114816 bytes) was 24 bytes ago --- */
[...]
/* size: 139488, cachelines: 2180, members: 31 */
[...]
With this, we can ask for less memory in test-null.sh.
[1]: https://git.dpdk.org/dpdk/commit/?id=436b3a6b6e62
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch functionally reverts the patch in fixes line to not have any
hardcoded library path in the final binary for the security reasons, in
case this binary distributed to production environment.
RPATH only added in RTE_DEVEL_BUILD case and this binary shouldn't
distributed, but still removing it to be cautious.
Fixes: 8919f73bcb ("mk: add build directory to library search path")
Cc: stable@dpdk.org
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The script test-null.sh is supposed to do a quick and simple
run of testpmd with null PMD only, for sanity check.
As it is not supposed to test probing of any other PMD,
physical device probing is switched to whitelist mode
by using a fake PCI address (0:0.0).
It will also help to keep memory usage stable across platforms.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The list of Arm configs is growing:
config/arm/arm64_armada_linux_gcc
config/arm/arm64_armv8_linux_gcc
config/arm/arm64_bluefield_linux_gcc
config/arm/arm64_dpaa_linux_gcc
config/arm/arm64_emag_linux_gcc
config/arm/arm64_n1sdp_linux_gcc
config/arm/arm64_octeontx2_linux_gcc
config/arm/arm64_thunderx2_linux_gcc
config/arm/arm64_thunderx_linux_gcc
In order to keep testing time reasonable,
and also because n1sdp is merged without a related fix in tests,
the list of configs is reduced in the script test-meson-builds.sh.
The list of tested Arm builds becomes:
build-arm64-host-clang (armv8a)
build-arm64-bluefield
build-arm64-dpaa
build-arm64-octeontx2
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Not all versions of pkg-config in distros have support for the
--define-prefix flag [1], causing errors when building examples manually or
with test-meson-builds.sh script [2].
For the former case, we need to remove the hard-coded use of the flag in
the Makefiles.
For the latter case, the flag is necessary for builds to succeed, so we
skip the tests when it's not present, passing it as part of the pkg-config
command if it is supported.
[1]
CentOS Linux release 7.7.1908 (Core)
pkg-config version 0.27.1
[2]
## Building cmdline
Unknown option --define-prefix
gmake: Entering directory
`...ild-x86-default/install-root/usr/local/share/dpdk/examples/cmdline'
rm -f build/cmdline build/cmdline-static build/cmdline-shared
test -d build && rmdir -p build || true
Unknown option --define-prefix
Unknown option --define-prefix
gcc -O3 main.c commands.c parse_obj_list.c -o build/cmdline-shared
main.c:14:28: fatal error: cmdline_rdline.h: No such file or directory
Fixes: ca9268529d ("examples: support relocated DPDK install")
Fixes: 7f80a2102b ("devtools: test pkg-config file")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
The regexp part of the cleanup routine was not updated accordingly when
a common prefix for temp files was introduced.
Set the trap handler only when required.
Fixes: ff37ca5d37 ("devtools: use a common prefix for temporary files")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
When trying to compile some examples with libdpdk.pc,
the right environment (for default target) was not loaded.
The consequence is to not detect some dependencies because
of missing directories in PKG_CONFIG_PATH.
The environment preparation is moved to a dedicate function,
and called for the default target (cc),
before testing the install output of the default build.
Fixes: 2722367412 ("devtools: load target-specific compilation environment")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The nfb PMD is disabled by default because of its dependency
on netcope-common package.
The variable DPDK_DEP_NFB was introduced but not used to notify
the dependency availability in the build test script.
The AF_XDP PMD is disabled by default because of its dependency
on libbpf on Linux.
An option was missing to notify the dependency availability
in the build test script.
Fixes: 6435f9a0ac ("net/nfb: add new netcope driver")
Fixes: f1debd77ef ("net/af_xdp: introduce AF_XDP PMD")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The meson build test fails if ccache is not available.
The use of ccache must be optional.
And if used, the compiler to check is the last word of $CC.
Fixes: e0ae780e65 ("devtools: test compiler availability only once")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
In order to re-use the same test environment as with
test-build.sh, the configuration file is loaded at each build,
after adjusting the variable DPDK_TARGET.
This is especially useful to set the variable PKG_CONFIG_PATH,
or define some meson options (without -D) in DPDK_MESON_OPTIONS.
The DPDK_TARGET values can be
aarch64-*, powerpc64-*, x86_64-*.
The matching DPDK_TARGET values for test-build.sh are
arm64-*, ppc_64-*, x86_64-*.
The advised expressions to use in the common configuration file are:
if echo $DPDK_TARGET | grep -q '^a.*64-' ; then
elif echo $DPDK_TARGET | grep -q '^p.*pc.*64' ; then
elif echo $DPDK_TARGET | grep -q '^x86_64' ; then
fi
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
The compilation test is skipped if the compiler is not available.
In the case of gcc/arm, it was tested both in the generic function
"build" and in the cross-compilation section.
By passing the compiler as argument of the generic function,
the test with "command" is done only once.
This small clean-up has the benefit of introducing the compiler
parameter to be used later in another improvement.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
In order to ease basic testing with customized options,
EAL and testpmd options can be added as third and fourth arguments
of the "null PMD" script.
Also, the first argument becomes more flexible by accepting
the testpmd path as an alternative to the build directory.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This small testpmd test was not working for a long time
because of several changes in EAL and mempool.
The 3 main issues solved are:
- Make --no-huge working by specifying an amount of memory
to allocate in legacy mode, and disabling mlockall.
- Load a mempool handler in shared library case.
- Support meson
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
- As "readlink -e" and "readlink -m" do not exist on freebsd,
use "readlink -f", it should not have any impact in these cases.
- "sed -ri" is invalid on freebsd and should be replaced by
"sed -ri=''"
- Use gmake instead of make.
This fixes the following command:
SYSDIR=/usr/src/sys ./devtools/test-build.sh \
-j4 x86_64-native-freebsd-gcc
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Update devtools/build-tags.sh to account the kernel
components under in kernel directory.
Fixes: acaa9ee991 ("move kernel modules directories")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add the ability to pass custom options to checkpatch script. An example
of use is to change the output format so it can run in emacs compilation
mode:
DPDK_CHECKPATCH_PATH=/path/to/linux/scripts/checkpatch.pl \
DPDK_CHECKPATCH_OPTIONS='--emacs --showfile --no-color' \
/path/to/dpdk.org/devtools/checkpatches.sh
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
With Debian and Ubuntu, the default installation path for the 64-bit
libraries is set to e.g. /usr/local/lib/x86_64-linux-gnu/, compared to
/usr/local/lib64 on Fedora and Redhat distributions. This causes issues
when using "pkg-config --define-prefix" since pkg-config assumes the prefix
to be the grandparent of where the .pc file is. On Ubuntu we then get the
cflags include path as being "/path/to/install-root/usr/local/lib/include"
i.e. with an extra "lib" in the path.
This issue only applies for test installs on Ubuntu and similar distros,
and is not a problem for regular installs since the --define-prefix
parameter would not be passed to pkg-config in those cases.
The workaround for this in our test build script is to explicitly make
"lib" the "libdir" setting for the install, overriding the distro-provided
default.
Fixes: 7f80a2102b ("devtools: test pkg-config file")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The pkg-config file generated as part of the build of DPDK should allow
applications to be built with an installed DPDK. We can test this as
part of the build by doing an install of DPDK to a temporary directory
within the build folder, and by then compiling up a few sample apps
using make working off that directory.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Allow the script to run with a reduced set of builds if clang, or
other compilers, are missing.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Putting a '__attribute__((deprecated))' in the middle of a function
prototype does not result in the expected result with gcc (while clang
is fine with this syntax).
$ cat deprecated.c
void * __attribute__((deprecated)) incorrect() { return 0; }
__attribute__((deprecated)) void *correct(void) { return 0; }
int main(int argc, char *argv[]) { incorrect(); correct(); return 0; }
$ gcc -o deprecated.o -c deprecated.c
deprecated.c: In function ‘main’:
deprecated.c:3:1: warning: ‘correct’ is deprecated (declared at
deprecated.c:2) [-Wdeprecated-declarations]
int main(int argc, char *argv[]) { incorrect(); correct(); return 0; }
^
Move the tag on a separate line and make it the first thing of function
prototypes.
This is not perfect but we will trust reviewers to catch the other not
so easy to detect patterns.
sed -i \
-e '/^\([^#].*\)\?__rte_experimental */{' \
-e 's//\1/; s/ *$//; i\' \
-e __rte_experimental \
-e '/^$/d}' \
$(git grep -l __rte_experimental -- '*.h')
Special mention for rte_mbuf_data_addr_default():
There is either a bug or a (not yet understood) issue with gcc.
gcc won't drop this inline when unused and rte_mbuf_data_addr_default()
calls rte_mbuf_buf_addr() which itself is experimental.
This results in a build warning when not accepting experimental apis
from sources just including rte_mbuf.h.
For this specific case, we hide the call to rte_mbuf_buf_addr() under
the ALLOW_EXPERIMENTAL_API flag.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
We had some inconsistencies between functions prototypes and actual
definitions.
Let's avoid this by only adding the experimental tag to the prototypes.
Tests with gcc and clang show it is enough.
git grep -l __rte_experimental |grep \.c$ |while read file; do
sed -i -e '/^__rte_experimental$/d' $file;
sed -i -e 's/ *__rte_experimental//' $file;
sed -i -e 's/__rte_experimental *//' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Rather than default to origin/master.., it can be handy to choose the
range you want to check.
Example on a branch rebased on next-net:
Before:
$ ./devtools/checkpatches.sh
...
...
67/69 valid patches
After:
$ ./devtools/checkpatches.sh -r next-net/master..
3/3 valid patches
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The incriminated commit broke the detection of new symbols skipping the
EXPERIMENTAL step before entering a stable ABI section.
sed won't return an error, check a null output instead.
Fixes: 3630757803 ("devtools: accept experimental symbol promotion")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
We have an incorrect variable name in this log.
Fixes: 4bec48184e ("devtools: add checks for ABI symbol addition")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
The new default-taget "linux" is introduced in v19.05-rc1
but not exist in before release such as v19.02 which have
default-target "linuxapp", there is no compatibility report
when run validate-abi.sh to check ABI compatibility between
v19.05-rc1 and v19.02, changed default-target from "linux"
to "linuxapp" in validate-abi.sh
Fixes: 218c4e68c1 ("mk: use linux and freebsd in config names")
Cc: stable@dpdk.org
Signed-off-by: Peng Huang <peng.huang@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The pipefail option is not supported in /bin/sh, just in bash/ksh and
similar shells - which means it's there by default on most Linux distros
but not on e.g. FreeBSD. Therefore we check for it's presence before
setting the option, and if it's missing, we upgrade verbosity level if
needed to ensure we never hide any build failures.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The use of "==" is non-standard extension from bash, so use "="
for comparisons instead.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Older versions of GCC, such as on Redhat/CentOS 7, don't support
-march=nehalem, but need -march=corei7 instead.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
If either gcc or clang are missing, skip doing those builds.
This allows a setup to only do, e.g. gcc tests.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Currently, when symbols get promoted from the EXPERIMENTAL section to a
stable ABI section, the script complains they should go to the
EXPERIMENTAL section.
Example:
ERROR: symbol rte_devargs_add is added in the DPDK_19.05 section, but is
expected to be added in the EXPERIMENTAL section of the version map
This is legit.
Moving from a stable ABI to another is also allowed, but must have gone
through the proper process.
Fixes: 4bec48184e ("devtools: add checks for ABI symbol addition")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The existing cocci script for coccinelle replaces all matching instances
of snprintf() with strlcpy() without regards to header inclusion. To allow
changes without build errors, we create a safer version of this script
that only makes changes when the rte_string_fns.h header is already
included.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The original coccinelle script worked by replacing instances of
snprintf(.."%s",...) with strlcpy(), but only where the source and dest
parameters were plain identifiers. Allowing expressions for those params
opens up a wide range of other possible changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Only one header file (rte_kni_common.h) was in the sub-directory
include/exec-env/
This file was installed in a sub-directory of the same name
in the makefile-based build.
Source and install directories are moved as below:
lib/librte_eal/linux/eal/include/exec-env/
-> lib/librte_eal/linux/eal/include/
build/include/exec-env/
-> build/include/
The consequence is to have a file hierarchy a bit more flat.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The test-meson-builds.sh script correctly detects the source directory and
builds the native builds successfully in a directory outside of the source
tree. However, the paths to the cross-files are not prefixed with the
source directory path, so the cross-builds all fail. Fix this by prepending
the source directory path appropriately.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The check for a valid configuration in build-tags.sh relied on the output
of "make showconfig" rather than checking directly for a config file of
that name. This broke when as part of the rename of the linuxapp/bsdapp
configs to just linux/freebsd, as we stopped advertising the old names
even if they worked. Changing the code to just look for the config
file by name fixes this issue while shortening the code too.
Fixes: 218c4e68c1 ("mk: use linux and freebsd in config names")
Fixes: aafaea3d3b ("devtools: add tags and cscope index generation")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When piping the ninja command through cat, we lose the error value from
the call to ninja in the case of failure. This prevents the script from
exiting at the first broken build. Fix this by setting the "pipefail"
shell option.
Fixes: 4bcb9b7686 ("devtools: add verbose option to meson build test")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the cross files for meson compilation from having linuxapp
in the name to just linux in the name.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The term "linuxapp" is a legacy one, but just calling the subdirectory
"linux" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The term "bsdapp" is a legacy one, but just calling the subdirectory
"freebsd" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
build-tags.sh is broken because of removed 'test' folder, this breaks
helper make targets like 'make cscope', 'make tags', etc...
Fixing it by removing 'test' from source directories list.
Fixes: a9de470cc7 ("test: move to app directory")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Fix trivial bug. In sh shell, 'foo = 1' is not the same as
'foo=1'. Using 'foo = 1' makes the shell attempt to interpret foo
as a command, rather than a simple variable assignment.
Fixes: dafc04c151 ("devtools: fix return of forbidden addition checks")
Cc: stable@dpdk.org
Signed-off-by: Michael Santana <msantana@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Enable codespell by default.
codespell is a feature by checkpatch.pl that
checks for common spelling mistakes in patches.
This feature is disabled by default. To enable it one must add
the '--codespell' flag to the $options variable in
checkpatches.sh. With this change codespell is enabled by default.
The user can decide to turn off codespell from a one of the config
files read by checkpatches.sh.
Signed-off-by: Michael Santana <msantana@redhat.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When running ninja, the commands are, by default, always printed on top of
each other. For those who want more detail in the output, two levels of
verbose output has been added to the test-meson-builds script. When "-v" is
passed, or the "TEST_MESON_BUILD_VERBOSE" flag is set in the environment,
then the output of ninja is passed through "cat" to prevent each line
overwriting the next. If "-vv" is passed, or
"TEST_MESON_BUILD_VERY_VERBOSE" is set in the environment, then ninja is
called with the "-v" flag to print out each command in full as it is
executing.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
readlink option "-m" is not supported on FreeBSD (checked on BSD 11),
so change to the largely-equivalent "-f" flag.
Fixes: a55277a788 ("devtools: add test script for meson builds")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.
This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.
For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
CONFIG_RTE_LIBRTE_PMD_ISAL was not tested because of a typo.
CONFIG_RTE_LIBRTE_PMD_QAT_SYM was not tested since it has been
introduced and made CONFIG_RTE_LIBRTE_PMD_QAT enabled by default.
While at it, DPDK_DEP_JSON is now checked for "y",
as other DPDK_DEP_* variables, instead of non-empty.
Fixes: 3c32e89f68 ("compress/isal: add skeleton ISA-L compression PMD")
Fixes: 7a34c21557 ("compress/qat: add empty driver")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The PMD zlib was not enabled in devtools/test-build.sh.
It is fixed by using the environment variable DPDK_DEP_ZLIB.
Fixes: 0c4e4c16b0 ("compress/zlib: introduce zlib PMD")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The option CONFIG_RTE_LIBRTE_BPF_ELF was never enabled
with test-build.sh.
It is fixed with the environment variable DPDK_DEP_ELF.
Fixes: 5dba93ae5f ("bpf: add ability to load eBPF program from ELF object file")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The current check to see whether we need to call meson or just ninja
simply checked if the build directory existed. However, if meson was run
but failed, the build directory would still exist. We can fix this by
instead checking for the build.ninja file inside the directory. Once that
is present, we can use ninja safely and let it worry about rerunning
meson if necessary.
Fixes: a55277a788 ("devtools: add test script for meson builds")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The incriminated commit did relax the condition to catch all sections
but dropped the + removal which can trigger false detection of the
special EXPERIMENTAL section when adding symbols and the section in the
same patch.
Fixes: 7281cf520f ("devtools: relax rule for identifying symbol section")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
It does not hurt reporting the incriminated section.
Before:
ERROR: symbol rte_plop is added in a section other than the EXPERIMENTAL
section of the version map
After:
ERROR: symbol rte_plop is added in the DPDK_19.02 section, but is
expected to be added in the EXPERIMENTAL section of the version map
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The regex to determine the end of the map file chunk in a patch seems to
be wrong, It was using perl regex syntax, which awk doesn't appear to
support (I'm still not sure how it was working previously). Regardless,
it wasn't triggering and as a result symbols were getting added to the
mapdb that shouldn't be there.
Fix it by converting the regex to use traditional posix syntax, matching
only on the negation of the character class [^map]
Tested and shown to be working on the ip_frag patch set provided by
doucette@bu.edu
Fixes: 4bec48184e ("devtools: add checks for ABI symbol addition")
Cc: stable@dpdk.org
Reported-by: Cody Doucette <doucette@bu.edu>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Replace the content of warning in the forbidden tokens script
from using the searched regex into using explicit messages
Signed-off-by: Arnon Warshavsky <arnon@qwilt.com>
Including svg files with the svg extension is a common mistake:
.. figure:: example.svg
must be
.. figure:: example.*
So it will work also when building pdf doc with figures converted
to png files.
A check is added in checkpatches.sh.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Arnon Warshavsky <arnon@qwilt.com>
This patch introduces clients to the telemetry API.
When a client makes a connection through the initial telemetry
socket, they can send a message through the socket to be
parsed. Register messages are expected through this socket, to
enable clients to register and have a client socket setup for
future communications.
A TAILQ is used to store all clients information. Using this, the
client sockets are polled for messages, which will later be parsed
and dealt with accordingly.
Functionality that make use of the client sockets were introduced
in this patch also, such as writing to client sockets, and sending
error responses.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Brian Archbold <brian.archbold@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The 'TX' in OCTEON TX would cause a warning.
Adding an exception for that.
OCTEON TX is a registered product under Cavium
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Really minor issue:
There were extra spaces making the alignment wrong.
Fixes: e95faac151 ("crypto/mrvl: rename PMD to mvsam")
Fixes: 4ccc8d770d ("net/mvneta: add PMD skeleton")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
