Rx offload flag `DEV_RX_OFFLOAD_RSS_HASH` which can be used to
enable/disable PMDs write to `rte_mbuf:#️⃣:rss`. The hns3 PMD driver
already can notify the validity of `rte_mbuf:#️⃣rss` to the
application by enabling `PKT_RX_RSS_HASH` flag in `rte_mbuf::ol_flags`.
Fixes: 19a3ca4c99cf ("net/hns3: add start/stop and configure operations")
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, based on hns3 VF device error may occur during initialization.
The root cause as below:
When the following formula is executed during initialization, the
private variable named hw->tqps_num has not been obtained from PF driver
through mailbox, further causes failure when mapping interrupt and
queues.
hw->num_msi = (num_msi > hw->tqps_num + 1) ? hw->tqps_num + 1 : num_msi;
We need to use hw->tqp_num after it is correctly assigned.
On the other hand, because the private variable named hw->num_msi, which
represents the number of MSI-x interrupt of hns3 PF/VF device, is used in
the '.get_reg' ops implementation function to dump all interrupt related
registers, it should be obtained from firmware directly and we'd better
not modify it in the driver.
Fixes: ef2e785c36cf ("net/hns3: fix Tx interrupt when enabling Rx interrupt")
Fixes: 02a7b55657b2 ("net/hns3: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The hns3 network engine is built-in multiple SoCs, such as kunpeng 920,
kunpeng 930, etc. The PCI revision id is 0x21 in kunpeng 920, and the PCI
revision id is 0x30 in kunpeng 930.
This patch gets PCI revision to identify different version of hardware
network engine.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch modifies the print format for firmware version in the log, It
replaces "0x%08x" with "%lu.%lu.%lu.%lu" in the format control string.
By the way, this patch adds ".fw_version_get" ops implemation for hns3
VF PMD driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, when upper application calls rte_eth_dev_info_get API
function to query the Rx offload capability based on hns3 network
engine, RSS hash offload capacity is missing.
This patch fixes it by adding the related capacity in the
'.dev_infos_get' ops implementation function named hns3_dev_infos_get
and hns3vf_dev_infos_get for hns3 PF/VF PMD driver.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, Rx interrupt cannot work normally after reset (such as FLR,
global reset and IMP reset), when running l3fwd-power application based
on hns3 network engine.
The root cause is that the hardware configuration about Rx interrupt
does not recover after reset.
This patch fixes it with the following modification.
1. The internal static function named hns3(vf)_init_ring_with_vector is
moved from hns3_init_pf to hns3(vf)_init_hardware because
hns3(vf)_init_hardware is called both in the initialization and the
RESET_STAGE_DEV_INIT stage of the reset process.
2. The internal static function named hns3(vf)_restore_rx_interrupt is
added in hns3(vf)_restore_conf, it is used to recover hardware
configuration about interrupt vectors of rx queues in the
RESET_STAGE_DEV_INIT stage of the reset process.
3. The internal static function named hns3_dev_all_rx_queue_intr_enable
and hns3_enable_all_queues are added in hns3(vf)_dev_start(which
called in the initialization, so after calling the rte_eth_dev_start
API successfully, the driver is ready to work.
4. The function named hns3_dev_all_rx_queue_intr_enable and
hns3_enable_all_queues are also added in hns3(vf)_start_service(which
called in the RESET_STAGE_DEV_INIT stage of the reset process), so
after start_service, the driver is ready to work.
Note:
1. Because FLR will clear queue's interrupt enable bit hardware
configuration, so we add calling hns3_dev_all_rx_queue_intr_enable to
enable interrupt before enabling queues.
2. After finished the initialization, we can enable queues to work by
calling the internal function named hns3_enable_all_queues.
Fixes: 02a7b55657b2 ("net/hns3: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Currently, when upper application calls the rte_eth_dev_mac_addr_add API
function to add a MC mac address based on hns3 PF/VF device, it will
fail.
In hns3 network engine adding UC and MC mac address with different
commands with firmware. We need to determine whether the input address
is a UC or a MC address to call different commands in the
'.mac_addr_add' and '.mac_addr_remove' ops implementation functions in
hns3 PF and VF driver as below:
hns3_add_mac_addr
hns3vf_add_uc_mac_addr
hns3_remove_mac_addr
hns3vf_remove_mac_addr
By the way, it is recommended calling the rte_eth_dev_set_mc_addr_list API
function to set the MC mac address, because using the
rte_eth_dev_mac_addr_add API function to set MC mac address may affect the
specifications of UC mac addresses.
Fixes: 7d7f9f80bbfb ("net/hns3: support MAC address related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
This patch replaces the specific macro named RTE_INTR_VEC_ZERO_OFFSET
provided by DPDK framework instead of the magic number 0.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, the return value processing of some functions can be combined
and the result is that some codes can be optimized.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, the '.vlan_offload_set' ops implementation function named
hns3vf_vlan_offload_set always return 0 in hns3 VF PMD driver.
This patch fixes it with the following modification in the function
named hns3vf_vlan_offload_set.
1. Avoid setting hardware configuration and return -EIO during resetting.
2. Add the return value detection process for calling internal static
function named hns3vf_en_hw_strip_rxvtag.
Fixes: a5475d61fa34 ("net/hns3: support VF")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, when performing test case as follow:
1. Run testpmd application based on hns3 network engine with multiple
receive queues(--rxq=N --txq=N, N>1).
2. Create the special RSS rules by "create flow ..." command in the
command prompt of the testpmd application.
3. Flush the RSS rules created in step 2 by "flow flush ..." command.
4. Enable RSS by "port config all rss all" command.
In step 4, the command exeuctes successfully. This phenomenon is
inconsistent with the expectation. The API function named
rte_eth_dev_rss_hash_update called in the command should return error
and the command should fail.
This patch fixes it by adding a flag for disabling RSS in the driver.
When RSS rules is flushed, we set the the flag with true, and the
'.rss_hash_update' ops implementation function named
hns3_dev_rss_hash_update return -EINVAL.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
For the current hns3 PMD driver, there are some RSS related bugs at
the following scenes:
1. Start the application with the number of Rx queues equals 1(--rxq=1),
modify the number of Rx queue to some number greater than 1 during
normal operation. As a result, upper application can't receive packets
from multiple rx queues.
2. Start testpmd application with the option disable-rss and the number
of Rx queue is greater than 1(--disable-rss --rxq=N, N>1). As a result,
upper application still can receive packets from multiple rx queues.
The root cause as below:
There are some error configuration in the RSS indirection table of hns3
network engine.
This patch fixes them with the following modification.
1. When RSS size is changed, we need to update RSS redirection table
maintained by driver and configure them to hardware. Besides, during
the entire reset process, we need to ensure that the RSS table
information are not overwritten and configured directly to the hardware
in the RESET_STAGE_RESTORE stage of the reset process.
2. When sarting testpmd application with the options disable-rss, it
doesn't need to configure RSS redirection table to hardware.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, when performing the following test case:
1. Run testpmd application based on hns3 PF device.
2. Inject reset(global/IMP reset) repeatedly.
After the reset, the network port can't link up.
In the RESET_STAGE_DEV_INIT stage of the reset process, the driver will
reinitialize the hardware. If global/IMP reset occurs at this time
again, the operation of reinitialize the hardware will fail because that
firmware don't respond to the configuration commands issued by driver.
In current driver, when failed to reinitialize the hardware, rollback
operation is done, such as clearing the relevant configuration of the
command queue registers.
If firmware detects that the function's command queue register is not
configured correctly, it will not complete the reset related hardware
configuration for this function, resulting in that driver can't detect
that the hardware reset has been completed. And then the reset process
of the driver exit abnormally, the hardware can not work normally after
reset.
This patch fixes it by avoid clearing the command queue related
registers when failed to reinitialize the hardware in the
RESET_STAGE_DEV_INIT stage of the reset process.
Fixes: 2790c6464725 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
This patch removes unnecessary MAC address validity check operation in
the .mac_addr_set ops implementation function named
hns3_set_default_mac_addr and hns3vf_set_default_mac_addr, because it
has been guaranteed that input parameter named mac_addr is valid address
in the rte layer of DPDK framework.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Currently, we only support VF device is bound to vfio_pci or igb_uio and
then driven by DPDK driver when PF is driven by kernel mode hns3 ethdev
driver, VF is not supported when PF is driven by hns3 DPDK driver.
This patch adds promiscuous and allmulticast mode support for hns3 VF
PMD driver.
1) The promiscuous/allmulticast mode can be configured successfully only
based on the trusted VF device. If based on the non trusted VF
device, configuring promiscuous/allmulticast mode will fail. The hns3
VF device can be configured as trusted device by hns3 PF kernel
ethdev driver on the host by "ip link set <eth num> vf <vf id> turst
on" command.
2) After the promiscuous mode is configured successfully, hns3 VF PMD
driver can receive the ingress and outgoing traffic. In the words,
all the ingress packets, all the packets sent from the PF and other
VFs on the same physical port.
3) Note: Because of the hardware constraints, By default vlan filter is
enabled and couldn't be turned off based on VF device, so vlan filter
is still effective even in promiscuous mode. If upper applications
don't call rte_eth_dev_vlan_filter API function to set vlan based on
VF device, hns3 VF PMD driver will can't receive the packets with
vlan tag in promiscuous mode.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The hns3 PF/VF devices on the same port share the hardware MTU
configuration. Currently, we send mailbox to inform hns3 PF kernel
ethdev driver to finish hardware MTU configuration in hns3 VF PMD
driver, there is no need to stop the port for hns3 VF device, and
the MTU value issued by hns3 VF PMD driver must be less than or
equal to PF's MTU.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, when receiving and transmitting packets based on hns3 network
engine there are probably unexpected and redundant Tx interrupts if Rx
interrupt is enabled.
The root cause as below:
Tx and Rx queues with the same number share the interrupt vector in hns3
network engine, and in this case there are the residual hardware mapping
relationship configuration between queue and interrupt vector configured
in hns3 kernel ethdev driver.
We should clear the all hardware mapping relationship configurations in
the initialization. Because of the hardware constraints, we have to
implement clearing the relationship by binding all queues to the last
interrupt vector and reserving the last interrupt vector, this method
results in a decrease of the maximum queues when upper applications call
the rte_eth_dev_configure API function to enable Rx interrupt.
Fixes: 02a7b55657b2 ("net/hns3: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds TCP segment offload support for hns3 PMD driver.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently there is a certain probability of segment error in concurrent
reset when the port is closing.
The calltrace info:
This GDB was configured as "aarch64-redhat-linux-gnu".
Reading symbols from /usr/app/testpmd...(no debugging symbols found)...
done.
[New LWP 98204]
[New LWP 98203]
[New LWP 98206]
[New LWP 98205]
[New LWP 98207]
[New LWP 98208]
Missing separate debuginfo for /root/lib/libnuma.so.1
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Core was generated by `/usr/app/testpmd --log-level=6 --socket-mem 16'.
Program terminated with signal 11, Segmentation fault.
Missing separate debuginfos, use:
debuginfo-install glibc-2.17-260.el7.aarch64
(gdb) bt
in hns3vf_service_handler ()
1 0x00000000006988b8 in eal_alarm_callback ()
2 0x00000000006969b4 in eal_intr_thread_main ()
3 0x0000ffffb08d6c48 in start_thread () from /lib64/libpthread.so.0
4 0x0000ffffb0828600 in thread_start () from /lib64/libc.so.6
(gdb)
Reset process may turn on the cancelled link state timer whether the
current port status is on or off, in order to solve this problem, this
patch add judge the current network port state before starting the
timer, only the port in the running state can start the link state
timer, so as to solve the problem that the link state timer accesses the
null pointer and causes the segment error.
Fixes: 2790c6464725 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, we only support VF device is bound to vfio_pci or igb_uio and
then driven by DPDK driver when PF is driven by kernel mode hns3 ethdev
driver, VF is not supported when PF is driven by hns3 DPDK driver.
This patch adds support setting VF MAC address by hns3 PF kernel ethdev
driver on the host by "ip link set ..." command.
1) If the hns3 PF kernel ethdev driver sets the MAC address for VF
device before the initialization of the related VF device, hns3 VF
PMD driver should get the MAC address from PF driver through mailbox
and configure hardware using this MAC address in the initialization.
The hns3 VF PMD driver get the MAC address form PF driver, if
obtaining a non-zero MAC address from mailbox, VF driver will
configure hardware using it, otherwise using a random MAC address in
the initialization of VF device.
2) If the hns3 PF kernel ethdev driver sets the MAC address for VF
device after the initialization of the related VF device, the PF
driver will notify VF driver to reset VF device to make the new MAC
address effective immediately. The hns3 VF PMD driver should check
whether the MAC address has been changed by the PF kernel netdevice
driver, if changed VF driver should configure hardware using the new
MAC address in the recovering hardware configuration stage of the
reset process.
3) When user has configured a mac address for VF device by "ip link set
..." command based on the PF device, the hns3 PF kernel ethdev driver
does not allow VF driver to request reconfiguring a different default
mac address and return -EPREM to VF driver through mailbox.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Hardware does not support individually enable/disable/reset the Tx or Rx
queue in hns3 network engine, driver must enable/disable/reset Tx and Rx
queues at the same time.
Currently, hns3 PMD driver does not support the scenarios as below:
1) When calling the following function, the input parameter nb_rx_q and
nb_tx_q are not equal.
rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q,
uint16_t nb_tx_q,
const struct rte_eth_conf *dev_conf);
2) When calling the following functions to setup queues, the
cumulatively setup Rx queues are not the same as the setup Tx queues.
rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,,,);
rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,,,);
However, these are common usage scenarios in some applications, such as,
l3fwd, ip_ressmbly and OVS-DPDK, etc.
This patch adds support for this usage of these functions by setup fake
Tx or Rx queues to adjust numbers of Tx/Rx queues. But these fake queues
are imperceptible, and can not be used by upper applications.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch removes the redundant initialization of the variable
named ret.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch removes the redundant statement calling hns3_stats_reset()
to clear statistical information explicitly in the initialization of
VF device, because hardware has been reset by FLR in the initialization
and the initial hardware and software statistics values are 0.
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds supports of receive packets through interrupt mode for
hns3 PF/VF driver. The following ops functions should be implemented
defined in the struct eth_dev_ops:
rx_queue_intr_enable
rx_queue_intr_disable
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, port link status is "up" in VF driver after user calling the
rte_eth_dev_stop API. This is unreasonable.
Therefore, this patch adjusts the strategy of getting link status from
PF driver for VF. VF driver should stop getting link status from PF by
canceling the alarm that VF driver send mailbox message to PF driver,
when the rte_eth_dev_stop API is called. And VF driver should restore
the alarm when the rte_eth_dev_start API is called.
Fixes: a5475d61fa34 ("net/hns3: support VF")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
When the application using VF device exits abnormally, for example,
when it is killed by 'kill -9', kernel PF netdev driver also stores
the corresponding configuration table entries of VF device.
This patch fixes it by adding message of deleting VF configuration
table entry corresponds to the revision of kernel hns3 netdev
driver, the new message is added to notify the kernel PF netdev
driver to clean up the VF configuration initialization during VF
initialization.
This revision is compatible with the old version of kernel hns3
netdev driver. The old version of kernel pf netdev driver will
ignore this message.
Fixes: a5475d61fa34 ("net/hns3: support VF")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
PF FLR resets the PCIe ECAM space of all VFs under the PF
and does not automatically recover. Therefore, the VF driver
needs to restore the ECAM configuration, including
bus_master_en, msix_enable to avoid FLR reset failure.
Fixes: 2790c6464725 ("net/hns3: support device reset")
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds multiple process support for hns3 PMD driver.
Multi-process support selection queue by configuring RSS or
flow director. The primary process supports various management
ops, and the secondary process only supports queries ops.
The primary process notifies the secondary processes to start
or stop tranceiver.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Wang (Jushui) <wangmin3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds reset related process for hns3 PMD driver.
The following three scenarios will trigger the reset process,
and the driver settings will be restored after the reset is
successful:
1. Receive a reset interrupt
2. PF receives a hardware error interrupt
3. VF is notified by PF to reset
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds stats_get, stats_reset, xstats_get, xstats_get_names
xstats_reset, xstats_get_by_id and xstats_get_names_by_id related
function codes.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds abnormal interrupt process for hns3 PMD driver,
the interrupt reported by NIC hardware.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds get_reg related function codes for hns3 PMD driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds queue related operation, package sending and
receiving function codes.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Wang (Jushui) <wangmin3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for hns3 VF PMD driver.
In current version, we only support VF device is bound to vfio_pci or
igb_uio and then driven by DPDK driver when PF is driven by kernel mode
hns3 ethdev driver, VF is not supported when PF is driven by DPDK
driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@hisilicon.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
