Remove rte_pause() definition from rte_common.h and
switchover to architecture specific rte_pause.h
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring enqueue burst/bulk functions so that
those functions can optionally return the amount of free space in the
ring. This information can be used by applications in a number of ways,
for instance, with single-producer queues, it provides a max
enqueue size which is guaranteed to work. It can also be used to
implement watermark functionality in apps, replacing the older
functionality with a more flexible version, which enables apps to
implement multiple watermark thresholds, rather than just one.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Now that we're printing out a page of stats every second to the console,
we should give the stats it's own core so that we don't interfere with
the performance of the Rx core.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch tunes Rx, Tx, and rte_distributor_process() burst sizes to
maximize performance.
It also addresses some checkpatch issues.
The result is approximately 10% performance increase.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Give the distribution functionality it's own core for performance,
otherwise it's limited by the Rx core.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
On some machines, ports take several seconds to come up. This
patch causes the app to wait.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This will allow us to see what's going on at various stages
throughout the sample app, with per-second visibility
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This is the main switch over between the legacy API and the new
burst API. We rename all the functions in rte_distributor.c to remove
the _v1705, and we add in _v20 in the rte_distributor_v20.c
We also rename the rte_distributor_next.h as rte_distributor.h, as
this is now the public header.
At the same time, we need the autotests and sample app to compile
properly, hence those changes are in this patch also.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The variable optind should be reset to one not zero.
From the man page:
"The variable optind is the index of the next element to be processed in
argv. The system initializes this value to 1.
The caller can reset it to 1 to restart scanning of the same argv, or when
scanning a new argument vector.”
The problem I saw with my application was trying to parse the wrong
option, which can happen as DPDK parses the first part of the command line
and the application parses the second part. If you call getopt() multiple
times in the same execution, the behavior is not maintained when using
zero for optind.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Today, all logs whose level is lower than INFO are dropped at
compile-time. This prevents from enabling debug logs at runtime using
--log-level=8.
The rationale was to remove debug logs from the data path at
compile-time, avoiding a test at run-time.
This patch changes the behavior of RTE_LOG() to avoid the compile-time
optimization, and introduces the RTE_LOG_DP() macro that has the same
behavior than the previous RTE_LOG(), for the rare cases where debug
logs are in the data path.
So it is now possible to enable debug logs at run-time by just
specifying --log-level=8. Some drivers still have special compile-time
options to enable more debug log. Maintainers may consider to
remove/reduce them.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Zero packets can be returned by rte_eth_rx_burst() and
rte_distributor_returned_pkts() inside lcore_rx(), so
for zero packet scenario instead of proceeding to
next operations we should continue to the next iteration of the
loop to avoid unnecessary processing overhead which is causing
rx packets to be dropped and hence distributor failing to forward the
packets.
Fixes: 07db4a97 ("examples/distributor: new sample app")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Value returned from a function is not checked for errors before being used.
Coverity issue: 13207
Fixes: 07db4a9750 ("examples/distributor: new sample app")
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
The debug logs must be enabled at compile-time and run-time.
There are also some internal flags in some examples to enable the debug
logs of the applications. They are now enabled in debug configs and
can be disabled thanks to the more generic logtype mechanism:
rte_set_log_type(RTE_LOGTYPE_USER1, 0);
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
_mm_prefetch is defined only in x86 compilers.
Use rte_prefetch_non_temporal() abstraction instead of _mm_prefetch(x, 0)
to in-order to build distributor application for non x86 platforms
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
examples/distributor/main.c(338): error #167:
argument of type "struct rte_mbuf *"
is incompatible with parameter of type "const char *"
The first param passed to _mm_prefetch is wrong,
need convert "struct rte_mbuf *" to "void *".
Fixes: 07db4a9750 ("examples/distributor: new sample app")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
The macro to turn on additional debug output when the app was compiled
with "-DDEBUG" was missing a ";".
Fixes: 07db4a9750 ("examples/distributor: new sample app")
Signed-off-by: Anbarasan Murugesan <anbarasanx.murugesan@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Latest mbuf changes (priv_size addition and related fixes)
exposed small problem with testpmd and few other sample apps:
when mbuf size is exaclty 2KB or less, that causes
ixgbe PMD to select scattered RX even for configs with 'normal'
max packet length (max_rx_pkt_len == ETHER_MAX_LEN).
To overcome that problem and unify the code, new macro was created
to represent recommended minimal buffer length for mbuf.
When appropriate, samples are updated to use that macro.
Fixes: dfb03bbe2b ("app/testpmd: use standard functions to initialize
mbufs and mbuf pool")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
RSS offload types were defined separately for 1/10G and 40G NICs,
and have no relationship with flow types. The modifications are to
unify all RSS offload types for all PMDs. Unified RSS offload types
have new and common names which can be used for any PMD or
applications, and decouple from specific hardwares.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with fm10k]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
A new sample app that shows the usage of the distributor library. This
app works as follows:
* An RX thread runs which pulls packets from each ethernet port in turn
and passes those packets to worker using a distributor component.
* The workers take the packets in turn, and determine the output port
for those packets using basic l2forwarding doing an xor on the source
port id.
* The RX thread takes the returned packets from the workers and enqueue
those packets into an rte_ring structure.
* A TX thread pulls the packets off the rte_ring structure and then
sends each packet out the output port specified previously by the worker
* Command-line option support provided only for portmask.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
