Returning a different value when the current link status differs from the
previous one was probably useful at some point in the past but is now
meaningless; this value is ignored both internally (mlx4 PMD) and
externally (ethdev wrapper).
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Thanks to the fact the PMD temporarily uses a slower interface for Rx,
removing the WR ID hack to instead store mbuf pointers directly makes the
code simpler at no extra cost.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This reverts commit acac55f164.
"Fast Verbs" is a nonstandard experimental interface that must be reverted
for compatibility reasons. Its replacement is slower but temporary,
performance will be restored by a subsequent commit through an enhanced
data path implementation. This one focuses on maintaining basic
functionality in the meantime.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This reverts commit 9980f81dc2.
"Fast Verbs" is a nonstandard experimental interface that must be reverted
for compatibility reasons. Its replacement is slower but temporary,
performance will be restored by a subsequent commit through an enhanced
data path implementation. This one focuses on maintaining basic
functionality in the meantime.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This reverts commit 8b3ffe95e7.
Multicast loopback prevention is not part of the standard Verbs interface.
Remove it temporarily.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This reverts commit 3e49c148b7.
Resource domains are not part of the standard Verbs interface. The
performance improvement they bring will be restored later through a
different data path implementation.
This commit makes the PMD not rely on the non-standard QP allocation
interface.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs API used to set QP attributes is deprecated. Revert to the
standard API since it actually supports the remaining ones.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs API used to implement inline receive is deprecated.
Support will be added back after refactoring the PMD.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs API used to implement Tx and Rx burst functions is deprecated.
Drop scatter/gather support to ease refactoring while maintaining basic
single-segment Rx/Tx functionality in the meantime.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs API used to implement packet type recognition is deprecated.
Support will be added back after refactoring the PMD.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs API used to implement Tx and Rx checksum offloads is deprecated.
Support for these will be added back after refactoring the PMD.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs RSS API used in this PMD is now obsolete. It is superseded by an
enhanced API with fewer constraints already used in the mlx5 PMD.
Drop RSS support in preparation for a major refactoring. The ability to
configure several Rx queues is retained, these can be targeted directly by
creating specific flow rules.
There is no need for "ignored" Rx queues anymore since their number is no
longer limited to powers of two.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This reverts commit ff00a0dc56.
Support for several RSS parent queues was necessary to implement the RSS
flow rule action, dropped in a prior commit.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This reverts commit d7769c7c08.
Existing RSS features rely on experimental Verbs provided by Mellanox OFED.
In order to replace this dependency with standard distribution packages,
RSS support must be temporarily removed to be re-implemented using a
different API.
Removing support for the RSS flow rule action is the first step toward this
goal.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Configuring several Rx queues enables RSS, which causes an additional
special parent queue to be created to manage them.
MAC flows are associated with the queue supposed to receive packets; either
the parent one in case of RSS or the single orphan otherwise.
For historical reasons the current implementation supports another scenario
with multiple orphans, in which case MAC flows are configured on all of
them. This is harmless but useless since it cannot happen.
Removing this feature allows dissociating the remaining MAC flow from Rx
queues and store it inside the private structure where it belongs.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Only the default port MAC address remains and is not configurable.
This is done in preparation for a major refactoring.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This option both sets the maximum number of segments for Rx/Tx packets and
whether scattered mode is supported at all. This commit removes the latter
as well as configuration file exposure since the most appropriate value
should be decided at run-time.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Current implementation is partial (Tx only), not convenient to use and
not of primary concern.
Remove this feature before refactoring the PMD.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Verbs support for RSS, inline receive and extended device query calls has
not been optional for a while. Their absence is untested and is therefore
unsupported.
Remove the related compilation checks and assume Mellanox OFED is up to
date, as described in the documentation.
Use this opportunity to remove a few useless data path debugging messages
behind compilation checks on never defined macros.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Use maximum number reported by hardware capabilities as replacement for the
static check on MLX4_PMD_MAX_PHYS_PORTS.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
The seemingly artificial limitation on the maximum number of instances for
this PMD is an historical leftover that predates its first public release.
It was used as a workaround to support multiple physical ports on a PCI
device exposing a single bus address when mlx4 was implemented directly as
an Ethernet device driver instead of a PCI driver spawning Ethernet
devices.
Getting rid of it simplifies device initialization.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Copyright lasts long enough not to require notices to be updated yearly.
The current approach of updating them occasionally while working on
unrelated tasks should be deprecated in favor of dedicated commits updating
all files at once when necessary.
Standardize on a single year per copyright owner.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Update efx_rx_scale_mode_set(), efx_rx_scale_key_set()
and efx_rx_scale_tbl_set().
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Rename efx_rx_scale_support_get() to efx_rx_scale_default_support_get(),
and efx_rx_hash_support_get() to efx_rx_hash_default_support_get().
All these really report is whether an exclusive RSS context was
successfully acquired at efx_rx_init().
efx_rx_scale_support_get() sounds like it reports whether the device
supports RSS, and whether exclusive or shared contexts are supported,
but it doesn't do that. Renaming it to
efx_rx_scale_default_support_get() helps to reflect that it reports
what RSS support the client gets without trying to allocate RSS
contexts itself.
Also rename efx_rx_scale_support_t to efx_rx_scale_context_type_t, to
make the enum more suitable for specifying the type of an RSS context
to be allocated.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The patch adds enc_rx_scale_max_exclusive_contexts member
to nic_cfg_t structure and sets the corresponding values
for Siena, Huntington and Medford
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Default RSS context check is carried out during filter
insertion on Siena and it needs to be fixed
Fixes: f7dc06bf35 ("net/sfc/base: import 5xxx/6xxx family support")
Cc: stable@dpdk.org
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Make the existing filter-specific define more general.
This is the same as MC_CMD_RSS_CONTEXT_ALLOC_OUT_RSS_CONTEXT_ID_INVALID.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Unused variables will be found in several places if RSS
support is disabled at build time; the patch is to fix it
Fixes: 4ec1fc3ba8 ("net/sfc: add basic stubs for RSS support on driver attach")
Fixes: d9ff551fc9 ("net/sfc: support RSS hash offload")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Support for the feature is added to EFX Tx datapath
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Support for the feature is added to EFX Rx datapath
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Support MTU change in the range ETHER_MIN_MTU to PF_MTU. A drop in PF
MTU lowers VF MTU if it goes out of range.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
The corrupted code doesn't return error when probe function
fails due to error in device mac address getting.
By this way, the probe function may return success even if the
ETH dev is not allocated.
Hence, the probe caller, for example failsafe PMD, fails when it
tries to get ETH dev after the device was plugged out while mlx5
was probing it.
The fix adds error report to the probe caller when priv_get_mac fails
and in all other failure options which are missing it.
By this way, it prevents the unexpected behavior to miss ETH device
after the device was probed successfully.
This bug was already present in the original code taken from mlx4.
Fixes: 771fa900b7 ("mlx5: introduce new driver for Mellanox ConnectX-4 adapters")
Fixes: 1371f4df16 ("mlx5: check port is configured as ethernet device")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Allocate no more memory than necessary for the second call to
ETHTOOL_GLINKSETTINGS.
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
On redhat 7.2 clang reports the following error:
CC mlx5_rxmode.o
/drivers/net/mlx5/mlx5_ethdev.c:820:32: error: field 'edata' with
variable sized type 'struct ethtool_link_settings' not at the end
of a struct or class is a GNU extension
[-Werror,-Wgnu-variable-sized-type-not-at-end]
struct ethtool_link_settings edata;
Use alternative approach to reserve buffer space on the stack.
Fixes: ef09a7fc76 ("net/mlx5: fix inconsistent link status query")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
i40e HW data is gotten wrongly in i40evf_dev_stop function,
it may cause device can't be stopped.
This patch is to fix the issue.
Fixes: 1859934202 ("net/i40e: fix VF add/del MAC")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
efx_rx_scale_tbl_set() takes the number of entries in the scale table
to be set, not the size of the table in bytes; currently this bug does
not make any damage since the size argument is used to wrap the loop
on the input table when filling in an MCDI request in case if the table
size in the MCDI request is larger then one provided by the user,
and MCDI scale table size is the same as the size of the table provided
by the driver; this patch brings a fix for the bug
Fixes: 4ec1fc3ba8 ("net/sfc: add basic stubs for RSS support on driver attach")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
On Medford, with full-featured firmware running, encapsulated
packets may not be delivered unless filters are inserted for
them, as ordinary filters are not applied to encapsulated
packets. So filters for encapsulated packets need to be
inserted for each class of encapsulated packet. For simplicity,
catch-all filters are always inserted. These may match more
packets than the OS has asked for, but trying to insert more
precise filters increases complexity for little gain.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
This supports filters which match all unicast or multicast
inner frames in VXLAN, GENEVE, or NVGRE packets.
(Additional fields to match on can be added easily.)
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
MC_CMD_FILTER_OP_IN_EXT is needed to set filters for encapsulated
packets.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
VXLAN/NVGRE (and Geneve) support is available on SFN8xxx with
full-feature firmware variant running.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
fs_bus_uninit is always returning 0 no matter what was the status
of each sub device bus_uninit value.
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
As no matter the PF host driver is DPDK or other kernel drivers,
they are sharing the same virtchnnl interfaces to communicate to VFs.
To follow the generic interface, DPDK PF need to set Interrupt
Throttling (ITR) index according to the rxitr_idx from virtchnnl
instead of ITR_NONE.
Fixes: 6d59e4ea74 ("net/i40e: change version number to support Linux VF")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Since there's no specific version number to distinguish
DPDK PF and Linux kernel PF, DPDK VF won't recognize if
host is DPDK PF or kernel PF. The specific virtual channel
commands for DPDK pf can be deleted.
This patch removes I40E_VIRTCHNL_OP_CFG_VLAN_PVID.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
The corrupted code used wrongly snprintf return value as the
number of characters actually copied, in spite of the meaning
is the number of characters which would be generated for the
given input.
It caused to remain zerod bytes between the failsafe command line
non sub device parameters indicates end of string.
Hence, when rte_kvargs_parse tried to parse all parameters, it
got end of string after the first one and the others weren't parsed.
So, if the mac parameters was the first in command line it was
taken while hotplug_poll was left default, and vice versa.
The fix updates the buffer index by dedicated variable contains
the copy size, by the way validates the comma separation.
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
By default, Verbs maps the doorbell register to write combining.
Working with write combining is useful for drivers which use blue flame
for the doorbell write.
Since mlx5 PMD uses only doorbells and write combining mapping requires
an extra memory barrier to flush the doorbell after its write, setting
the mapping to un-cached by default.
Such change is expected to reduce the max and average round trip latency.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Alexander Solganik <solganik@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The reason for the requirement of a barrier between the txq writes
and the doorbell record writes is to avoid a case where the device
reads the doorbell record's new value before the txq writes are flushed
to memory.
The current use of rte_wmb is not necessary, and can be replaced by
rte_io_wmb which is more relaxed.
Replacing the rte_wmb is also expected to improve the throughput.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Alexander Solganik <solganik@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In function qede_rss_reta_update(), the pointer params returned from
call to function rte_zmalloc() may be NULL and will be dereferenced.
So, should judge if the params is NULL or not.
Fixes: 8b3ee85efe ("net/qede: fix RSS table entries for 100G adapter")
Cc: stable@dpdk.org
Signed-off-by: RongQiang Xie <xie.rongqiang@zte.com.cn>
Acked-by: Harish Patil <harish.patil@cavium.com>
The sub_device iterator macro should follow the general gist of the
tailq API for an easier understanding and safer use.
Once the loop has finished, the iterator should be set to NULL.
If no sub_device was iterated upon, the iterator should still be NULL.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
In enic_alloc_consistent() function, if rte_malloc for mze is failed,
!mze is true, memzone should be freed and function should return NULL.
Fixes: da5f560be9 ("net/enic: fix memory freeing")
Cc: stable@dpdk.org
Signed-off-by: RongQiang Xie <xie.rongqiang@zte.com.cn>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Extend debug logs verbosity by printing the full completion with error
along with the entire txq in case of error. For the Rx case no logs were
added since such errors are counted and recovered by the Rx data path.
Such prints are essential to understand the root cause for the error.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Currently, rte_eth_dev_mac_addr_add is used by a testpmd CLI
to add a MAC address for VF. But the parameter 'pool' of this
API means the VMDq pool, not VF.
So, it's wrong to use it to add the VF MAC address.
This patch provides a new API that can be used to
add VF MAC address on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The corrupted code didn't unlock the spinlock in xstats
get and reset functions error flow.
Hence, if these errors happened, the device spinlock was
left locked and many mlx5 device functionalities were blocked.
The fix unlocks the spinlock in the missed places.
Fixes: e62bc9e706 ("net/mlx5: fix extended statistics")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In the function ixgbe_flow_create(), the value ntuple_filter_ptr,
ethertype_filter_ptr, syn_filter_ptr, fdir_rule_ptr and l2_tn_filter_ptr
use rte_zmalloc().
malloc may return NULL, so we should check if the return value is NULL
or success.
Signed-off-by: RongQiang Xie <xie.rongqiang@zte.com.cn>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes the mapping of user priority to traffic class
in Rx/Tx path of DCB configuration. Each DCB traffic class
should include all user priorities mapping to it in both Rx and
Tx path.
Fixes: 0807f80d35 ("ixgbe: DCB / flow control")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
This version of MLNX_OFED is no more supported.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Since MLNX_OFED 4.1 this code is no more useful.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Secondary process is a copy/paste of the mlx4 drivers, it was never
tested and it even segfault at the secondary process start in the
mlx5_pci_probe().
This makes more sense to wipe this non working feature to re-write a
working and functional version.
Fixes: a48deada65 ("mlx5: allow operation in secondary processes")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Those are useless since DPDK headers have been cleaned up.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Those two if statements are useless as there is a verification on the drop
field of the flow to jump to the end of the function just above.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Vector PMD returns buffers to the application without setting the pointers
in the Rx queue to null nor allocating them. When the PMD cleanup the ring
it needs to take a special care to those pointers to not free the mbufs
before the application have used them nor if the application have already
freed them.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
To use the vector, it needs to add to the PMD Rx mbuf ring four extra mbuf
to avoid memory corruption. This additional mbuf are added on dev_start()
whereas all other mbuf are allocated on queue setup.
This patch brings this allocation back to the same place as other mbuf
allocation.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch prepare the merge of fake mbuf allocation needed by the vector
code with rxq_alloc_elts() where all mbuf of the queues should be
allocated.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
We need to support how firmware metadata was handled until now and also
the new API, since NFP NFD 3.0 firmware versions. The new metadata API
adds flexibility for working with different metadata types and, mainly,
to allow adding metadata from different firmware components independently.
Although this patch just supports one type handled by the PMD, future uses
regarding firmware apps will extend this support.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
A DPDK app could, whatever the reason, send packets with size 0.
The PMD is not sending those packets, which does make sense,
but the problem is the mbuf is not released either. That leads
to mbufs not being available, because the app trusts the
PMD will do it.
Although this is a problem related to app wrong behavior, we
should harden the PMD in this regard. Not sending a packet with
size 0 could be problematic, needing special handling inside the
PMD xmit function. It could be a burst of those packets, which can
be easily handled, but it could also be a single packet in a burst,
what is harder to handle.
It would be simpler to just send that kind of packets, which will
likely be dropped by the hw at some point. The main problem is how
the fw/hw handles the DMA, because a dma read to a hypothetical 0x0
address could trigger an IOMMU error. It turns out, it is safe to
send a descriptor with packet size 0 to the hardware: the DMA never
happens, from the PCIe point of view.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This patch is to align with PF kernel driver version 5.1.3 to add the
number of queues to transmit VLAN packets in msg of queue info to VF.
If DCB is enabled, it is the number of DCB traffic classes.
If DCB is not enabled and default VLAN is enabled, it is 1.
For other cases, it is 0.
Signed-off-by: Wei Dai <wei.dai@intel.com>
igb_uio and vfio-pci does pci reset during open and release of device.
So FLR request to LiquidIO PF driver during init and close in PMD is not
required.
See commit b58eedfc7d ("igb_uio: issue FLR during open and release of
device file")
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
The corrupted code couldn't recognize that all sub devices
were not ready for Tx traffic when failsafe PMD was trying
to switch device because of an unreachable condition using.
Hence, the current Tx sub device variable was not updated
correctly.
The fix removed the unreachable branch and added new one
in the right place respecting the original intent.
Fixes: ebea83f899 ("net/failsafe: add plug-in support")
Fixes: 598fb8aec6 ("net/failsafe: support device removal")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
intr_vec was not properly configured. This is not a problem when
just one queue is supported but it fails with multiqueue.
Some minor refactoring also done for hardware interrupt configuration.
Fixes: ea121b2831 ("net/nfp: add Rx interrupts")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Redirection table was not being updated properly.
There is also a problem when configuring RSS.
Fixes: 934e4c60fb ("nfp: add RSS")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
If not a valid mac present in configuration bar, PMD creates a random
one. It needs to be passed to the NIC.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Flow control watermark is not read out correctly,
that may cause an application who not intend to change
watermark but does change it with a rte_eth_dev_flow_ctrl_set
call right after rte_eth_dev_flow_ctrl_get.
The idea fix is, during init, the watermark is set with default value,
so it is not necessary to read out from hw register during flow_ctl_get,
But due to I40E_GLRPB_GHW limitation, it is shared by different ports on
the same device, it is possible the value is changed on another port,
but local variable not sync, so we have to read out register every
flow_ctl_get.
Fixes: f53577f069 ("i40e: support flow control")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Calling i40e_vsi_delete_mac without checking return
value (as is done elsewhere 5 out of 6 times)
Coverity issue: 140735
Fixes: 43c89d5a4f ("net/i40e: set VF MAC from PF")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a mode type check for MAC VLAN mode, if fdir is
in this mode, it do not need to do sanity check for x550.
Fixes: dc0c16105d ("ixgbe: fix X550 flow director check")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Scan now searches for devices through sysfs interface and adds them
to a list for later initialization. During probe, each device is
initialized accroding to its property.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Initially, DPAA2 objects (except ETH and CRYPTO) were defined from VFIO
layer. This patch moves that into Bus definition.
This patch also realigns the object types with the new device types.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Existing devices and drivers depended on device ID rather than type.
A new enumerator for all DPAA2 devices is introduced in this patch.
At this point, the probe would not be able to link DPAA2 devices
with the driver and I/O would not work. Subsequent patches will
fix this.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently DPAA2 code doesn't support multiple groups and containers.
Remove such provision in code to simplify code.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit reworks the API to move from two separate start
and stop functions, to a "runstate" API which allows setting
the runstate. The is_running API is replaced with an function
to query the runstate. The runstate functions take a id value
for service. Unit tests and the eventdev sw pmd are updated.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit reworks the service register function to accept
an extra parameter. The parameter is a uint32_t *, which when
provided will be set to the integer service_id that the newly
registered service is represented by.
This is useful for services that wish to validate settings at
a later point in time - they need to know their own service id.
This commit updates the eventdev sw pmd, as well as unit tests
to use the new register API.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Reset a NIC by calling dev_uninit() and then dev_init().
Go through the same way in NIC PCI remove without release
of ethdev resource and then NIC PCI probe function without
ethdev resource allocation.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Reset a NIC by calling dev_uninit and then dev_init.
Go through same way in NIC PCI remove without release of
ethdev resource and then NIC PCI probe function without
ethdev resource allocation.
Signed-off-by: Wei Dai <wei.dai@intel.com>
The QAT crypto driver does not need to depend on the ether library, so
remove the unnecessary header inclusion.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The filenames of the linker map files for DPDK PMDs, all follow a
standard format: rte_pmd_<libname>_version.map. The ring version, however,
had eth instead of pmd in the name, so was non-standard. By changing
this, we no longer need the build system to explicitly be given the name of
the mapfile, as it can determine it from the directory name.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This reverts commit 035a8cf88f.
Don't send messages to inactive VF will cause DPDK PF failing
to send messages to kernel VF.
With this revert, this issue will be solved.
Fixes: 035a8cf88f ("net/i40e: fix PF notify when VF is not up")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
After fail to create a flow and if this is the first flow, the
mask_added flag should be reset, or it will prevent a new flow
which require different mask be created, since the mask config
remains impact.
Fixes: 72c135a89f ("net/ixgbe: create consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Vector code is very young and can present some issues for users, to avoid
them to modify the selections function by commenting the code and recompile
the PMD, new devices parameters are added to deactivate the Tx and/or Rx
vector code.
By using such device parameters, the user will be able to fall back to
regular burst functions.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
If there's a Rx completion with error (e.g, MTU mismatch), it is handled
later out of main burst loop as a slow path for performance reason.
Statistics should be corrected by subtracting counters of errored packets.
Also, the last entry of mlx5_ptype_table[] must be RTE_PTYPE_ALL_MASK to
mark error in completion.
Fixes: ea16068c00 ("net/mlx5: fix L4 packet type support")
Fixes: 6cb559d67b ("net/mlx5: add vectorized Rx/Tx burst for x86")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The pinfo variable has wrong data. This has to have merged data of two
fields from Rx completion - pkt_info and hdr_type_etc.
Fixes: 6cb559d67b ("net/mlx5: add vectorized Rx/Tx burst for x86")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The data_off field of newly allocated mbufs is stale data. This shouldn't
be used in calculating Rx address for device when posting free buffers.
RTE_PKTMBUF_HEADROOM should be used instead and data_off of a mbuf will be
reset on packet reception anyway.
Fixes: 6cb559d67b ("net/mlx5: add vectorized Rx/Tx burst for x86")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Unlike mlx5_rx_burst(), mlx5_rx_burst_vec() doesn't replace completed
buffers one by one right after completion is processed but replenishes
multiple buffers later with rte_mempool_get_bulk(). Therefore, there could
be some buffer addresses left in the SW ring (rxq->elts[]) which have
already been delivered to application. As PMD doesn't own such buffers, it
must not be freed by PMD. "Trimming" is needed before cleanup.
A problem can be seen when quitting testpmd when
CONFIG_RTE_LIBRTE_MBUF_DEBUG=y and CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=y
Trimming should be as simple as possible, it shouldn't touch any indexes
and buffer allocation isn't necessary.
Fixes: 6cb559d67b ("net/mlx5: add vectorized Rx/Tx burst for x86")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Changing the MTU is not related to changing the number of segments,
activating or not the multi-segment support should be handled by the
application.
Fixes: 9964b965ad ("net/mlx5: re-add Rx scatter support")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Current mlx4 OFED version has bug which returns error to
ibv destroy functions when the device was plugged out, in
spite of the resources were destroyed correctly.
Hence, failsafe PMD was aborted, only in debug mode, when
it tries to remove the device in plug-out process.
The workaround added option to replace all claim_zero
assertions with debugging messages, by the way, this option
affects non ibv destroy assertions.
DPDK 18.02 release should work with Mellanox OFED-4.2 which will
include the verbs fix to this bug, then, this patch can
be removed.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Occasionally, the amount of packets to free from the work queue ends
perfectly on a boundary to have nb_free = 0 and pool = 0. This causes
a segfault as follows:
(gdb) bt
#0 rte_mempool_default_cache
#1 rte_mempool_put_bulk (n=0, obj_table=0x7f10deff2530, mp=0x0)
#2 enic_free_wq_bufs (wq=wq@entry=0x7efabffcd5b0,
completed_index=completed_index@entry=33)
#3 0x00007f11e9c86e17 in enic_cleanup_wq (enic=<optimized out>,
wq=wq@entry=0x7efabffcd5b0)
at /usr/src/debug/openvswitch-2.6.1/dpdk-16.11/drivers/net/enic/enic_rxtx.c:442
#4 0x00007f11e9c86e5f in enic_xmit_pkts (tx_queue=0x7efabffcd5b0,
tx_pkts=0x7f10deffb1a8, nb_pkts=<optimized out>)
at /usr/src/debug/openvswitch-2.6.1/dpdk-16.11/drivers/net/enic/enic_rxtx.c:470
#5 0x00007f11e9e147ad in rte_eth_tx_burst (nb_pkts=<optimized out>,
tx_pkts=0x7f10deffb1a8, queue_id=0, port_id=<optimized out>)
This commit makes the enic wq driver match other drivers who call the
bulk free, by checking that there are actual packets to free.
Fixes: 36935afbc5 ("net/enic: refactor Tx mbuf recycling")
CC: stable@dpdk.org
Reported-by: Vincent S. Cojot <vcojot@redhat.com>
Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=1468631
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: John Daley <johndale@cisco.com>
Buffer length be configured for each data segment should not exceed
the requested value, or device may fill data that exceed the boundary
of memory that be reserved.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Tested-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
When the output of an exec() slave definition is only a single newline
character, the fail-safe currently fails to parse the device with the
value returned by the rte_devargs library.
This behavior is incorrect, because the fail-safe should make a
difference between the absence of a device, and an erroneous device
declaration.
Fix the output sanitization in the case where no newline was at its end
and detect the special case of an absent device. The correct error code
is then returned.
Fixes: a0194d8281 ("net/failsafe: add flexible device definition")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
When there is no preferred device, failsafe will always
try to scan for preferred device. And if there is no device
found with the exec option, popen() will get an empty output.
In this case, it was forgotten to close the file descriptor.
It is fixed by closing the file descriptor even if the output is empty.
Coverity issue: 158633
Fixes: a0194d8281 ("net/failsafe: add flexible device definition")
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
We should only restore shadow_vfta when hw_vlan_filter is active.
Otherwise, we should restore the previous filtering behavior.
Fixes: f003fc3834 ("vmxnet3: enable vlan filtering")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
This patch adds support of 2.5G and 5G ethernet interface on X550.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Force recalculation of tunnel L4 chksum when inner L3/L4 chksum gets
updated due to HW offload.
Fixes: aab2161750 ("net/qede: add Tx offloads for MPLS-in-UDP packets")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Handle different MAC statistic fields between two chip variants by
reading the MAC counters from the adapter suitable statistics bins.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
'commit 4c4bdadfa9 ("net/qede: refactoring multi-queue implementation")'
introduced a regression where default RSS configuration is incorrect in
the case of 100G mode. Currently we are passing absolute queue ids while
creating RX/TX queues. But in CMT mode we need to provide queue id
relative to the engine id. So this fix takes into account num_hwfns
while creating queues.
Fixes: 4c4bdadfa9 ("net/qede: refactoring multi-queue implementation")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch modifies the recovery flow to allow ongoing PCIe
transactions to be completed. To achieve this, the load sequence is
changed such that the "final_cleanup" notification is sent while the
FID_enable is cleared.
This change ensures that the chip cleanup actions takes place from
previous driver instance if needed.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The callback arguments to _rte_eth_dev_callback_process() are swapped.
Fix them.
Fixes: d6af1a13d7 ("ethdev: add return values to callback process API")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The corrupted code doesn't return error when probe function
fails due to error in device mac address getting.
By this way, the probe function may return success even if the
ETH dev is not allocated.
Hence, the probe caller, for example failsafe PMD, fails when it
tries to get ETH dev after the device was plugged out while mlx4
was probing it.
The fix adds error report to the probe caller when priv_get_mac fails
and in all other failure options which are missing it.
By this way, it prevents the unexpected behavior to miss ETH device
after the device was probed successfully.
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Fixes: 001a520e41 ("net/mlx4: add port parameter")
Fixes: 7b06615392 ("mlx4: check if port is configured for ethernet")
Fixes: fec3608673 ("mlx4: query netdevice to get initial MAC address")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The corrupted code causes segmentation fault when user creates
flow with drop action before device starting.
For example, failsafe PMD recreates all the flows before calling
dev_start in plug-in sequence and mlx4 allocated its flow drop
queue in dev_start.
Hence, when failsafe created flow with drop action after plug-in
event, mlx4 tried to dereference flow drop queue which was
uninitialized.
The fix added check to the drop qp accessible and conditioned the
ibv_create_flow calling on device starting.
Fixes: 642fe56a1b ("net/mlx4: use a single drop queue for all drop flows")
Fixes: 46d5736a70 ("net/mlx4: support basic flow items and actions")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Calculation of packet type is currently enabled only when HW checksum is
enabled.
This isn't related to HW checksum offload. Enable it regardless.
Fixes: 081f7eae24 ("mlx5: process offload flags only when requested")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When advancing Tx ring index (txq->wqe_ci) in txq_scatter_v(), the title
descriptor of multi-packet send isn't taken into account if it doesn't
cross 64B boundary.
Fixes: 6cb559d67b ("net/mlx5: add vectorized Rx/Tx burst for x86")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
mlx5_tx_complete() polls completion queue multiple times until it
encounters an invalid entry. As Tx completions are suppressed by
MLX5_TX_COMP_THRESH, it is waste of cycles to expect multiple
completions in a poll. And freeing too many buffers in a call can
cause high jitter.
This patch improves throughput a little.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Only set the vlanonly bit if vlan_nonvlan is clear. Also, allow the
VLAN table to be cleared when vlanonly is set.
Clearing the VLAN table when vlanonly is set will stop all traffic
since it requires all frames to have a VLAN tag, and that tag to be
in the zero-length table. This is still a valid use case though,
and has been seen in the wild.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch stops PF from sending messages to inactive VF
and modifies VF state to active when VF reset is completed.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
RTE_ETH_EVENT_INTR_LSC callbacks are not called when all slaves goes down
in bond_ethdev_lsc_event_callback. It causes that link status change of
bonded device is not propagated up.
Fixes: deba8a2f8b ("net/bonding: fix link properties management")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
rte_eth_bond_primary_set segfaults for invalid port. This patch moves
devices check before use of internal data.
Fixes: 4c42498d91 ("net/bonding: allow slaves to also be bonded devices")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Some phy's take longer than others to come up. Add a retry to give
more phy's a chance to come up before returning an error.
Fixes: 2209c3e2c2 ("net/i40e: avoid PCI probing failure when using bogus SFP")
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
ETHTOOL_GLINKSETTINGS ioctl call in mlx5 pmd returns inconsistent
link status due to which any application relying on it would not
function correctly.
Fixes: 1884087198 ("net/mlx5: fix support for newer link speeds")
Cc: stable@dpdk.org
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
If the current VLAN anti spoof setting is same as the new value,
the firmware can return an error. Call the HWRM command to update
the new setting if it is different from the current value.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The pci_id_ixgbe_map table has only PCI_ANY_ID for
.subvend and .subdev in all entries. Using of IXGBE_SUBDEV_ID_82599_SFP
for 'dev' is not correct. It generates the wrong PMD_INFO_STRING.
The output of the program "dpdk-pmdinfo.py" is confusing.
Signed-off-by: Leonid Myravjev <myravjev@amicon.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Mirror rule id should not exceed the boundary defined by
IXGBE_MAX_MIRROR_RULES.
Fixes: fe3a45fd41 ("ixgbe: add VMDq support")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This patch sends the HWRM command to free a filter in the hardware,
before using it again.
Fixes: f92735db1e ("net/bnxt: add L2 filter alloc/init/free")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are wrongly using a Rx side HWRM command set_rx_mask to configure
VLAN anti-spoof. This being a Tx side feature, this patch
tries to fix it.
Since the HWRM command to do it is available only in
the newer firmware versions, the patch verifies the firmware
version before attempting to send the HWRM command to
the firmware.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch resets the VF stats during initialization
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
remove the unnecessary rte_delay in bnxt_set_hwrm_link_config
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Check if the vnic_id and rss_rule is not invalid before passing it
to the firmware to cleanup the VNIC. Log a message if the vnic_id
is invalid.
Fixes: db678d5c2b ("net/bnxt: add HWRM VNIC configure")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix use of local variable to avoid segfault.
cnt was incorrectly tested and decremented in the loop that removes
a VLAN from the table.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1) handle_async_event is a DEBUG level log message.
2) Log "Unable to get default VNIC for VF %d" at INFO level.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
