Pool 0 is not PF, it's VF 0. So the MAC is set for VF 0
but not PF.
The code introduced a weird issue. In the scenario PF + VF,
when only starting PF, the default PF MAC address is working.
But after starting a VF, the default PF MAC address becomes
the VF's address.
Use the pool which is not occupied by VFs for PF to fix it.
Fixes: 8164fe82846b ("ixgbe: add default mac address modifier")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
We find that VF receive address register is not set
if MAC address is assigned by PF. This patch fixes it.
Fixes: d82170d27918 ("igb: add VF support")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
VF default MAC address be added in PF Mac address list
instead of VF MAC address list, makes VF can't receive
packets. This patch fixes this issue.
Fixes: be2d648a2dd3 ("igb: add PF support")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Some customers find adding MAC addr to VF sometimes can fail,
but it is still stored in dev->data->mac_addrs[ ]. So this
can lead to some errors that assumes the non-zero entry in
dev->data->mac_addrs[ ] is valid.
Following acknowledgements are from specific NIC PMD
maintainer for their managing part.
This patch changes the ethdev internal API, it should not be
backported to a stable/LTS release so far.
Fixes: af75078fece3 ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The VDEV code will move to the bus drivers directory.
Rename functions from rte_eal_vdev_ to rte_vdev_
to prepare the move of the driver out of EAL.
The prefix rte_eal_vdrv_ is also renamed to rte_vdev_.
It was used for registration of vdev drivers.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The PCI code will move to the bus drivers directory.
Rename functions from rte_eal_pci_ to rte_pci_
to prepare the move of the driver out of EAL.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
To achieve functionality of retrieving only specific statistics
given by application there are two new functions added:
ixgbe_dev_xstats_get_by_ids() which retrieve
values of statistics specified by ids array
and ixgbe_dev_xstats_get_names_by_ids() which retrieve
names of statistics specified by ids array.
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
To achieve functionality of retrieving only specific statistics
given by application there are two new functions added:
eth_igb_xstats_get_by_id() which retrieve
values of statistics specified by ids array
and eth_igb_xstats_get_names_by_id() which retrieve
names of statistics specified by ids array.
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Revert patches to provide clear view for
upcoming changes. Reverted patches are listed below:
commit ea85e7d711b6 ("ethdev: retrieve xstats by ID")
commit a954495245c4 ("ethdev: get xstats ID by name")
commit 1223608adb9b ("app/proc-info: support xstats by ID")
commit 25e38f09af9c ("net/e1000: support xstats by ID")
commit 923419333f5a ("net/ixgbe: support xstats by ID")
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Rx queues configured with more than 1023 descriptors cause readv() calls to
fail due to more iovec entries than permitted by the kernel. As a result,
no packets can be received.
Quietly limit internal Rx queue size to the maximum number of iovec entries
to fix this issue.
Fixes: 0781f5762cfe ("net/tap: support segmented mbufs")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
RBDR buffers are refilled when SW consumes the buffers from CQ.
This creates deadlock case when CQ buffers exhausted due to lack
of RBDR buffers. Fix is to refill the RBDR when rx_free_thresh
meet, irrespective of the number of CQ buffers consumed.
Fixes: e2d7fc9f0a24 ("net/thunderx: add single and multi-segment Rx")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Fix aad capabilities for AES-GCM authtentication, aad is changed from
range 8-12 to 0-65535
Fixes: 8a9867a635c0 ("crypto/openssl: rename libcrypto to openssl")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit fixs segment fault when rte_eth_dev_close() is called on
a virtio dev more than once. Assigning zero after free to avoids
freed memory to be accessed again.
Fixes: 69c80d4ef89b ("net/virtio: allocate queue at init stage")
Cc: stable@dpdk.org
Signed-off-by: Huanle Han <hanxueluo@gmail.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Segfault happens when using virtio-user after commit 7f0a669e7b04
("ethdev: add allocation helper for virtual drivers").
It's due to we use ethdev->device to recognize physical devices,
but after above commit, this field is also filled for virtual
devices. Then we obtain the wrong pci_dev pointer and accessing
its field when copying pci info results in segfault.
To fix it, we use hw->virtio_user_dev to differentiate physical
devices from virtual devices.
Fixes: 6a7c0dfcdf40 ("net/virtio: do not depend on PCI device of ethdev")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The virtio port link status will always be DOWN:
The commit aa9f06061765 ("net/virtio: fix link status always being up")
introduces a flag to help checking the status. If this flag is not set,
status will be always down. However, in dev start, this flag is set
after link status update, then we miss the chance to change the status
to UP in dev start.
To fix this bug, we simply move the link status update after the flag
setting so that the status can be correctly updated.
Fixes: aa9f06061765 ("net/virtio: fix link status always being up")
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
As we already change to use capability list to detect MSI-X, remove
the redundant MSI-X detection in legacy devices.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
LSC flag is set in several places, but only the last one takes effect;
so we remove the redundant ones and just keep the last one.
This also fixes the bug that dev_flags being overwritten by
rte_eth_copy_pci_info(), which resets it to 0 unconditionally.
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The field, use_msix, in struct virtio_hw is not updated for modern
device, and is always zero. And now we depend on the status feature
and MSI-X to report LSC support (which is also not a correct
behavior). As a result, LSC is always disabled for modern devices.
To fix this, we just recognize MSI-X capability when going through
capability list, and update the info in virtio.
Fixes: 6ba1f63b5ab0 ("virtio: support specification 1.0")
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add the support of RTE_FLOW_ITEM_TYPE_SCTP type packet for
ixgbe ntuple filter.
Fixes: 672be56d76a ("net/ixgbe: parse n-tuple filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In case of fiber and link speed set to 1Gb at peer side (with autoneg
or with defined speed), link status could be not properly updated at
time cable is plugged-in.
Indeed if cable was not plugged when device has been configured and
started then link status will not be updated properly with new speed
as no link setup will be triggered.
To avoid this issue, IXGBE_FLAG_NEED_LINK_CONFIG is set to try a link
setup each time link_update() is triggered and current link status is
down. When cable is plugged-in, link setup will be performed via
ixgbe_setup_link().
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Acked-by: Wei Dai <wei.dai@intel.com>
We need to update dev->data->dev_link before handling LSC event.
Otherwise it will still have the initial value after the startup of
the program before interrupt callback was executed.
Fixes: 414b202343ce ("bonding: fix initial link status of slave")
Cc: stable@dpdk.org
Signed-off-by: Wei Wang <lnykww@gmail.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The type check for flow_type should be IXGBE_ATR_FLOW_TYPE_IPV4
in special card not RTE_ETH_FLOW_NONFRAG_IPV4_OTHER.
Fixes: dc0c16105d2 ("ixgbe: fix X550 flow director check")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If segments are used, just mbufs previously linked to head descriptor
of a mbuf chain are released. Other Tx descriptor are used for the
mbuf chain but they keep their linked mbufs without releasing them.
It is not a fatal issue because sooner or later those descriptors will
be head descriptors or just used for a single mbuf packet, then those
linked mbufs will be released.
However, this leads to apps needing bigger mbufs pools and some
confusion about memory requirements. Indeed, because larger pools, some
performance impact could also be expected due to cache misses.
With this patch all Tx descriptors will release linked mbufs inside the
xmit function, and rte_pktmbuf_seg_free is used instead of
rte_pktmbuf_free.
Fixes: 142854c62134 ("nfp: fix freeing multi-mbuf packets")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When an mbuf alloc fails during the mempool get operation for the
i40e bulk alloc receive function, the rx_mbuf_alloc_failed counter
is not incremented to record the error.
This fix ensures consistency with the other i40e receive procedures and
other net drivers.
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Changes included in this fix
- limit CFLAGS to base files
- fix to remove/mark unused members
- add checks for debug config option
- make qede_set_mtu() and qede_udp_dst_port_del() static and others
non-static as appropriate
- move local APIs qede_vlan_offload_set() and qede_rx_cqe_to_pkt_type()
- initialize variables as required
Fixes: ec94dbc57362 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
In SRIOV testing, print adapter info shows firmware version used by PF,
this patch provides fix to populate correct firmware version used by VF.
Fixes: 86a2265e59d7 ("qede: add SRIOV support")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Firmware supports ntuple configuration which is always based on 4-tuples.
So remove RTE_ETH_FLOW_FRAG_IPV4 and RTE_ETH_FLOW_FRAG_IPV6 as valid flows.
Also merge the two switch statements into one.
Fixes: 622075356e8f ("net/qede: support ntuple and flow director filter")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Use new mbuf flags PKT_RX_VLAN_STRIPPED and PKT_RX_QINQ_STRIPPED
introduced by the patch:
commit b37b528d957c ("mbuf: add new Rx flags for stripped VLAN")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
This defect is a functional issue where the RX CQE pointer remains
uninitialized in the LRO code path which can cause null pointer exception
while accessing VLAN or RSS hash value from CQE.
Coverity issue: 143474
Fixes: 29540be7efce ("net/qede: support LRO/TSO offloads")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
- Add a common routine to handle ETH_RX_CQE_TYPE_TPA_CONT and
ETH_RX_CQE_TYPE_TPA_END.
- Remove enum qede_agg_state since there is no need to maintain
aggregation state.
- Modify the segment chaining logic by tracking head and tail
TPA segments of each aggregation.
- Add more debug and comments.
- Mark the packet as PKT_RX_LRO.
Fixes: 29540be7efce ("net/qede: support LRO/TSO offloads")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Perform reset of the fastpath RX/TX rings after stopping device port and
not while starting the ports.
Fixes: cfe28a988565 ("net/qede: support unequal number of Rx/Tx queues")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
- In qede_mac_addr_set(), in order to configure default MAC address we
first delete the existing MAC address before trying to add new one. During
init time, there is no MAC filter to begin with, so trying to remove a
non-existing MAC address causes a firmware exception. This can be prevented
by internally calling qede_mac_addr_add() which has the checks in place to
delete a MAC address only if it was added before.
- Remove setting of the default MAC address from within
qede_dev_configure() since rte_eth_dev_start() calls mac_addr_set() anyway.
Fixes: 2ea6f76aff40 ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Only masked bits must be set in Verbs specification for a rule to be valid.
Fixes: 2097d0d1e2cc ("net/mlx5: support basic flow items and actions")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Testpmd failed to start when CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC
is disabled, the root cause is the length of sw_ring and queue are
incorrect with the above configuration.
Fixes: 0be295312966 ("net/i40e: fix compile error")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Recently link status change interrupt was enabled by default in testpmd,
it has opened the driver bug with not working LSC interrupt if either
igb_uio or uio_pci_generic kernel driver is used.
Fixes: 06bc197796e2 ("net/sfc: interrupts support sufficient for event queue init")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Previous too pessimistic estimation made completely impossible to send
packets with many segments (more than 100 with minimum Tx ring size).
Fixes: 8b00f426eb66 ("net/sfc: implement EF10 native Tx datapath")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
When Receive Side Coalescing (RSC) is not used, the RSC Disable
(RSC_DIS) filed of register Receive Filter Control Register (RFCTL)
should be set according to ixgbe datasheet.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
* Acquire PHY semaphore before device reset
* Add support for 2.5G KX physical layer
* Add MAC X550em/X557 LED on|off support
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch updates ixgbe_led_[on|off]_t_X550em for MAC or PHY connected
LEDs. To support both MAC or PHY connected LEDs, both MAC and PHY led
control registers are configured.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
