Allow users and packagers to override the default dpdk/drivers
subdirectory where the PMDs get installed under $lib.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Timothy Redaelli <tredaelli@redhat.com>
Compile Mellanox driver when its external dependencies are met. A
glue version of the driver can still be requested by using the
-Denable_driver_mlx_glue=true
Meson will try to find the required external libraries. When they are
not installed system wide, they can be provided though CFLAGS, LDFLAGS
and LD_LIBRARY_PATH environment variables, example (considering
RDMA-Core is installed in /tmp/rdma-core):
# CLFAGS=-I/tmp/rdma-core/build/include \
LDFLAGS=-L/tmp/rdma-core/build/lib \
LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
meson output
# LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
ninja -C output install
Note: LD_LIBRARY_PATH before ninja is necessary when the meson
configuration has changed (e.g. meson configure has been called), in
such situation the LD_LIBRARY_PATH is necessary to invoke the
autoconfiguration script.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Install in $kerneldir/../extra/dpdk. Usually $kerneldir should something
like: /lib/modules/$kver/build, so this directory will match the default
one used by legacy makefiles.
Fixes: a52f4574f7 ("igb_uio: build with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for building MRVL MVPP2 PMD with meson. To avoid cluttering
the build environment and to keep all relevant settings local to a cross
build we get MUSDK library installation path from a meson option.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch enables the test/test app to be built. It also adds
the test binary to be a meson-test, which allows the meson test
infrastructure to be used to run tests.
Tests are listed using the same test binary, however each test
sets a different DPDK_TEST environment variable. The string contents
of this DPDK_TEST env var is entered in the command line interface.
As such, the familiar test names such as "ring_perf_autotest" etc
are valid tests to run using this meson test infrastructure.
Note that the tests are run serially, given that we cannot run
multiple primary processes at a time. As each test must initialize
EAL this takes some time depending on the number of hugepages.
In future, we could improve this to run multiple tests from one
EAL init, but it is out of scope for this patchset.
Finally, an option to build the tests is added to the meson build
options. When disabled, the unit test code in test/test is not
compiled. The default is set to 'true'. To disable, run:
$ meson configure -Dtests=false
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for having selected example apps built as part of a meson,
ninja build. By default none are built, and those to be built should be
named directly in the -Dexamples='' meson configuration argument.
This is useful for developers working on a feature who want to use a
suitable example, or examples, to test that feature, as they can compile
everything up in one go, and run the example without having to do a ninja
install first.
This commit adds examples which don't consist of multiple apps in
subdirectories to the meson build, so they can be built by default by
passing -Dexamples parameter to meson.
Not included are the following examples:
* ethtool
* multi-process
* netmap_compat
* performance-thread
* quota_watermark
* server_node_efd
* vm_power_manager
To test the apps added here, use the following command, merged to one line,
to add them to your meson build (command to be run inside the build
directory):
meson configure -Dexamples=bbdev_app,bond,cmdline,distributor,\
eventdev_pipeline_sw_pmd, exception_path,helloworld,\
ip_fragmentation,ip_pipeline,ip_reassembly, ipsec-secgw,\
ipv4_multicast,kni,l2fwd-cat,l2fwd-crypto,l2fwd-jobstats,\
l2fwd-keepalive,l2fwd,l3fwd-acl,l3fwd-power,l3fwd-vf,l3fwd,\
link_status_interrupt,load_balancer,packet_ordering,ptpclient,\
qos_meter,qos_sched,rxtx_callbacks,skeleton,tep_termination,\
timer,vhost,vhost_scsi,vmdq,vmdq_dcb
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Wrap each entry at the description value to avoid really long lines also.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
A subset of the dpdk headers are arch-dependent, but have common names
and thus cause a clash in a multiarch installation.
For example, rte_config.h is different for each target.
Add a "include_subdir_arch" option to allow a user to specify a
subdirectory for arch independent headers to fix multiarch support.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Normally, each library has it's own version number based on the ABI.
Add an option to have all libs just use the DPDK version number as the
.so version.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Support building igb_uio using meson and ninja. For this, we still use the
kernel's kbuild system, by calling out to make, since it's safer and easier
than trying to reproduce that in meson. A list of suitable file
dependencies is given so that we have a reasonable chance of a rebuild when
necessary.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
To build with meson and ninja, we need some initial infrastructure in
place. The build files for meson always need to be called "meson.build",
and options get placed in meson_options.txt
This commit adds a top-level meson.build file, which sets up the global
variables for tracking drivers, libraries, etc., and then includes other
build files, before finishing by writing the global build configuration
header file and a DPDK pkgconfig file at the end, using some of those same
globals.
From the top level build file, the only include file thus far is for the
config folder, which does some other setup of global configuration
parameters, including pulling in architecture specific parameters from an
architectural subdirectory. A number of configuration build options are
provided for the project to tune a number of global variables which will be
used later e.g. max numa nodes, max cores, etc. These settings all make
their way to the global build config header "rte_build_config.h". There is
also a file "rte_config.h", which includes "rte_build_config.h", and this
file is meant to hold other build-time values which are present in our
current static build configuration but are not normally meant for
user-configuration. Ideally, over time, the values placed here should be
moved to the individual libraries or drivers which want those values.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
