Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Reserved field should be 0x60 instead of 0x40.
Will fail FW check otherwise.
Fixes: 9428310ae1f1 ("regex/mlx5: add engine status check")
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
mlx5_nl_mac_addr_flush should flush all allocated MAC
addresses.
The MAC addresses array size should be of size
MLX5_MAX_MAC_ADDRESSES, but currently we return without
flushing the addresses if size is MLX5_MAX_MAC_ADDRESSES.
This was fixed by not allowing an array larger than
MLX5_MAX_MAC_ADDRESSES.
Fixes: e9a8ac59b6e2 ("common/mlx5: fix MAC addresses assert")
Cc: stable@dpdk.org
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
To detect the timestamp mode configured on the NIC the mlx5
PMD uses the firmware command ACCESS_REGISTER_USER. This
command is relatively new and might be not supported by
older firmware versions and was rejected, causing annoying
messages in kernel log.
This patch adds the attribute flag check whether firmware
supports the command and avoid the call if it does not.
Fixes: bb7ef9a96281 ("common/mlx5: add register access DevX routine")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Currently, the counter query requires the counter ID should start
with 4 aligned. In none-batch mode, the counter pool might have the
chance to get the counter ID not 4 aligned. In this case, the counter
should be skipped, or the query will be failed.
Skip the counter with ID not 4 aligned as the first counter in the
none-batch count pool to avoid invalid counter query. Once having
new min_dcs ID in the poll less than the skipped counters, the
skipped counters will be returned to the pool free list to use.
Fixes: 5382d28c2110 ("net/mlx5: accelerate DV flow counter transactions")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When Rx/Tx queue was being created with DevX the allocated
doorbell record size was only uint64_t. That was definitely
less than size of CPU cacheline and it might have happened the
doorbell records attached to different queues handled by
different cores were allocated within same cacheline. It might
have caused the contention on doorbell record writing.
This patch extends the allocated memory size for doorbell
record to cacheline size.
Fixes: 21cae8580fd0 ("net/mlx5: allocate door-bells via DevX")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This adds pci detection and documentation for Intel GEN2
QuickAssist device 200xx (PF Did 0x18ee, VF Did 0x18ef).
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch fixes the uninitialized variable bug in QAT PMD.
Fixes: 9f27a860dc16 ("crypto/qat: move generic qp function to qp file")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch removes unused fields from structs qat_qp and
qat_qp_config, together with their initializations.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The structure cpt_request_info needs only 8 byte alignment.
This patch replaces __rte_cache_aligned of cpt_request_info
with __rte_aligned(8) and removes __rte_aligned(8) in
cpt_meta_info structure.
Fixes: fab634eb87ca ("crypto/octeontx2: support security session data path")
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
DOCSIS protocol performance in the downlink direction can be improved
significantly in the QAT SYM PMD, especially for larger packets, by
pre-processing all CRC generations in a batch before building and
enqueuing any requests to the HW. This patch adds this optimization.
Fixes: 6f0ef237404b ("crypto/qat: support DOCSIS protocol")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Now that mlx5_pci PMD checks for enabled classes and performs
probe(), remove() of associated classes, individual class driver
does not need to check if other driver is enabled.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add generic mlx5 PCI PMD layer as part of existing common_mlx5
module. This enables multiple classes (net, regex, vdpa) PMDs
to be supported at same time.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
mlx5 PCI Device supports multiple classes of devices such as net, vdpa,
and/or regex.
To support these multiple classes, change mlx5_class to a
bitmap values so that if users asks to enable multiple of them, all
supported classes can be parsed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
mlx5_common is shared library between mlx5 net, VDPA and regex PMD.
It is better to use common initialization helper instead of using
RTE_PRIORITY_CLASS priority.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Following two errors are reported when compiled with
gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5).
drivers/common/mlx5/linux/mlx5_glue.h:188:2:
error: function declaration isn't a prototype [-Werror=strict-prototypes]
drivers/common/mlx5/linux/mlx5_glue.h:188:2:
error: function declaration isn't a prototype [-Werror=strict-prototypes]
Fix them by adding void data type in empty argument list.
Fixes: 34fa7c0268e7 ("net/mlx5: add drop action to Direct Verbs E-Switch")
Fixes: 400d985eb586 ("net/mlx5: add VLAN push/pop DR commands to glue")
Cc: stable@dpdk.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The mlx5 PMD did not support queue_start and queue_stop eth_dev API
routines, queue could not be suspended and resumed during device
operation.
There is the use case when this feature is crucial for applications:
- there is the secondary process handling the queue
- secondary process crashed/aborted
- some mbufs were allocated or used by secondary application
- some mbufs were allocated by Rx queues to receive packets
- some mbufs were placed to send queue
- queue goes to undefined state
In this case there was no reliable way to recovery queue handling
by restarted secondary process but reset queue to initial state
freeing all involved resources, including buffers involved in queue
operations, reset the mbuf pools, and then reinitialize queue
to working state:
- reset mbuf pool, allocate all mbuf to initialize pool into
safe state after the crush and allow safe mbuf free calls
- stop queue, free all potentially involved mbufs
- reset mbuf pool again
- start queue, reallocate mbufs needed
This patch introduces the queue start/stop feature with some
limitations:
- hairpin queues are not supported
- it is application responsibility to synchronize start/stop
with datapath routines, rx/tx_burst must be suspended during
the queue_start/queue_stop calls
- it is application responsibility to track queue usage and
provide coordinated queue_start/queue_stop calls from
secondary and primary processes.
- Rx queues with vectorized Rx routine and engaged CQE
compression are not supported by this patch currently
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Several source files include Verbs header files as in (1). These source
files will not compile under non-Linux operating systems. This commit
removes this inclusion in two cases:
Case 1: There is no usage of ibv_* or mlx5dv_* symbols in the source
file so the inclusion in (1) can be safely removed.
Case 2: Verbs symbols are used. Please note the inclusion in (1) already
appears in file linux/mlx5_glue.h (which represents the interface
to the rdma-core library). Therefore, replace (1) in the source file
with (2). Under non-Linux operating systems - file mlx5_glue.h will not
include (1).
(1)
#include <infiniband/verbs.h>
#include <infiniband/mlx5dv.h>
(2)
#include <mlx5_glue.h>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The following Linux calls are replaced by their matching rte APIs.
mmap ==> rte_mem_map()
munmap == >rte_mem_unmap()
sysconf(_SC_PAGESIZE) ==> rte_mem_page_size()
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
As scatter FCS might be not supported for decapsulated tunnel
packets in some NIC HW, a new capability bit which indicates
if scatter FCS works with decap is added.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit allocates the data path object page and B-tree table memory
from unified malloc function with explicit flag MLX5_MEM_RTE.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This commit allocates the control path objects memory from the unified
malloc function.
These objects are all used during the instances initialize, it will not
affect the data path.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add the internal mlx5 memory management functions:
mlx5_malloc_mem_select();
mlx5_memory_stat_dump();
mlx5_rellaocate();
mlx5_malloc();
mlx5_free();
User will be allowed to manage memory from system or from rte memory
with the unified functions.
In this case, for the system with limited memory which can not reserve
lots of rte hugepage memory in advanced, will allocate the memory from
system for some of not so important control path objects based on the
sys_mem_en configuration.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In order to use dynamic flex parser to parse protocols that is not
supported natively, two steps are needed.
Firstly, creating the parse graph node. There are three parts of the
flex parser: node, arc and sample. Node is the whole structure of a
flex parser, when creating, the length of the protocol should be
specified. Then the input arc(s) is(are) mandatory, it will tell the
HW when to use this parser to parse the packet. For a single parser
node, up to 8 input arcs could be supported and it gives SW ability
to support this protocol over multiple layers. The output arc is
optional and also up to 8 arcs could be supported. If the protocol
is the last header of the stack, then output arc should be NULL. Or
else it should be specified. The protocol type in the arc is used to
indicate the parser pointing to or from this flex parser node. For
output arc, the next header type field offset and size should be set
in the node structure, then the HW could get the proper type of the
next header and decide which parser to point to.
Note: the parsers have two types now, native parser and flex parser.
The arc between two flex parsers are not supported in this stage.
Secondly, querying the sample IDs. If the protocol header parsed
with flex parser needs to used in flow rule offloading, the DW
samples are needed when creating the parse graph node. The offset
of bytes starting from the header needs to be set. After creating
the node successfully, a general object handle will be returned.
This object could be queried with Devx command to get the sample
IDs.
When creating a flow, sample IDs could be used to sample a DW from
the parsed header - 4 continuous bytes starting from the offset. The
flow entry could specify some mask to use part of this DW for
matching. Up to 8 samples could be supported for a single parse
graph node. The offset should not exceed the header length.
The HW resources have some limitation, low layer driver error should
be checked once there is a failure of creating parse graph node.
Signed-off-by: Netanel Gonen <netanelg@mellanox.com>
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The structures and other definitions will be used for the dynamic
flex parser creation via Devx command interface. These structures
will be used as some some intermediate variables and input
parameters for the parser creation API.
It is better to keep all members consistent with the PRM definition
even though some of them will not be used.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In the translation stage, the eCPRI item should be translated into
the format that lower layer driver could use. All the fields that
need to match must be in network byte order after translation, as
well as the mask. Since the header in the item belongs to the network
layers stack, and the input parameter of the header is considered to
be in big-endian format already.
Base on the definition in the PRM, the DW samples will be used for
matching in the FTE/STE. Now, the type field and only the PC ID, RTC
ID, and DLY MSR ID of the payload will be supported. The masks should
be 00 ff 00 00 ff ff(00) 00 00 in the network order. Two DWs are
needed to support such matching. The mask fields could be zeros to
support some wildcard rules. But it makes no sense to support the
rule matching only on the payload but without matching type field.
The DW samples should be stored after the flex parser creation for
eCPRI. There is no need to query the sample IDs each time when
creating a flow rule with eCPRI item. It will not introduce
insertion rate degradation significantly.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The DevX routine to read/write NIC registers via DevX API is added.
This is the preparation step to check timestamp modes and units
and gather the extended statistics.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch prepares the common part of the mlx5 PMDs to
support packet send scheduling on mbuf timestamps:
- the DevX routine to query the packet pacing HCA capabilities
- packet pacing Send Queue attributes support
- the hardware related definitions
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In case the ibverbs glue is a separate library to dlopen,
the PMD library must allocate a glue structure to be filled by dlopen.
The glue management was in mlx5_common.c and moved to mlx5_common_os.c,
but the variable allocation was not removed from the original file.
The consequence was a link failure, if ibverbs dlopen option is enabled,
because of the redefinition of the variable (with GCC 10):
multiple definition of 'mlx5_glue'
The original definition is removed to keep only the one moved
in the Linux sub-directory.
Fixes: 79aa430721b1 ("common/mlx5: split common file under Linux directory")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
This commit introduce the RegEx poll mode drivers class, and
adds Mellanox RegEx PMD.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
This patch makes the Infiniband device physical port name
recognition more strict. Currently mlx5 PMD might recognize
the names like "pf0sf0" erroneously as "pf0" and the wrong
device type (host PF representor) is reported.
The names like "pf0sf0" belong to PCI subfunctions which
is currently not supported by mlx5 PMD and this false
recognition must be eliminated.
Fixes: 420bbdae89f2 ("net/mlx5: fix host physical function representor naming")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This adds the ConnectX-6 Lx device id to the list of supported
Mellanox devices that run the MLX5 PMD.
The device is still in development stage.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
Enable/disable link state interrupt and get link state api is
defined using IOCTL calls from kernel driver
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Interrupt callback unregister can fail with -EAGAIN
when interrupt handler is active in interrupt thread.
Hence retry before reporting a failure or proceeding further.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Segmentation fault has been observed while running procinfo
with reset options i.e. --stats-reset and --xstats-reset.
Reason is procinfo runs as a secondary process and tries to
hold a lock which is part of struct mdev, which was not
allocated as part of shared memory.
Fixes: 5ca59711f771 ("common/octeontx2: add mailbox base support infra")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As cryptodev driver_id is allocated per-process,
a corner case exists where binaries for primary and
secondary processes could have different driver_ids
if built differently. Add checking in qat PMD to catch and
handle the case where driver_ids are inconsistent.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch refactors qat data into structures
which are local to the process and structures which
are intended to be shared by primary and secondary
processes. This enables qat devices to be used by
multi process applications.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
In case of LX2160, PROTOCOL command can be used in some of the PDCP
cases, in those the jump command prior to KEY command may not be
required.
The issue observed due to these JUMP command on LX2160 is that,
the CAAM gets stuck and the processing never get completed. The
system becomes unusable.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In cases of NULL auth in PDCP, the descriptors
should be based on ALGORITHM command instead of
PROTOCOL command.
It was done in case of encap, but was missing in
decap.
Fixes: 526cdf60f1e5 ("crypto/dpaa2_sec: update desc for PDCP 18-bit enc-auth")
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The maximum length of job descriptor which is formed
is 13 words and hence rta_inline_query should take
care of the max descriptor(shared + job) lengths and
thus find out of the key can be referenced or immediate.
Fixes: 05b12700cd4c ("crypto/dpaa_sec: support null algos for protocol offload")
Fixes: 13273250eec5 ("crypto/dpaa2_sec: support AES-GCM and CTR")
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In case of RTA_SEC_ERA = 8, where the length of shared desc
is large for some of PDCP cases, the descriptor buffer cannot
hold 2 extra words when HFN override is enabled. As a result,
the descriptor fails.
This patch converts one of the keys from immediate key to
reference key hence reducing the length of the descriptor.
Fixes: 2e4cbdb4b2c2 ("crypto/dpaax_sec: support PDCP U-Plane with integrity")
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Populate capabilities based on device features.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
In case of gmac auth the encryption offset should be set to zero.
Fixes: b74652f3a91f ("common/cpt: add microcode interface for encryption")
Fixes: 177b41ceee61 ("common/cpt: add microcode interface for decryption")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
