Build DPDK with Fedora 35 containers.
GHA container support does not allow caching images and docker hub
seems to limit image pulls.
On the other hand, the Fedora project hub does not seem to limit them,
so prefer this hub.
Nevertheless, let's try to be good citizens and cache (once a day) a
prepared image for subsequent builds.
This preparation is done in a first prepare-container-images job.
The rpm-container-builds job then depends on it with a 'needs:' tag.
Differences with builds in Ubuntu GHA vm images:
- tasks are run as root in containers, no need for sudo,
- compiler must be explicitly installed,
- GHA artifacts can't contain a ':' in their name, and must be filtered,
- environment variables are not inherited and must be passed explicitly,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
No need to explicitly enable drivers bus/vdev and mempool/ring.
bus/vdev is always enabled since
commit 2e33309ebe ("config: enable/disable drivers in Arm builds")
mempool/ring is always enabled since
commit 81c2337e04 ("build: make ring mempool driver mandatory")
The driver net/null is kept to allow running test-null.sh.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The variables REF_GIT_TAG and LIBABIGAIL_VERSION are set
in the CI configuration like .travis.yml or .github/workflows/build.yml.
The default values are outdated and probably unused.
The default values are removed completely
to avoid forgetting an update in future.
The use of the variables is quoted to make sure
a missing value will trigger an appropriate failure.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Disabling drivers and optional libraries was not tested.
Add a new target in test-meson-builds.sh and GHA with just the minimum
to run test-null.sh and any other optional component disabled.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Enable Github Actions to cross-compile code for POWER systems.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The way we're building DPDK in CI, with -Dmachine=default, has not been
updated when the option got replaced to preserve a backwards-complatible
build call to facilitate ABI verification between DPDK versions. Update
the call to use -Dplatform=generic, which is the most up to date way to
execute the same build which is now present in all DPDK versions the ABI
check verifies.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Acked-by: Aaron Conole <aconole@redhat.com>
Bump Meson required version to 0.49.2 which is chosen so as
to be provided by both redhat-8 and debian-10.
Update documentation and travis setup script accordingly.
This fixes the following warning:
WARNING: Project targeting '>= 0.47.1' but tried to use feature introduced
in '0.48.0': console arg in custom_target
'console' argument is used within kernel/linux/kni/meson.build
Signed-off-by: Gabriel Ganne <gabriel.ganne@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The machine=generic is not understood by older version of dpdk.
It is directly passed to gcc as -march=generic.
Since DPDK requires SSE 4.2, this results in an error when configuring
v21.02 sources for generating the reference ABI.
From GHA [1] logs:
"""
Compiler for C supports arguments -Wundef: YES
Compiler for C supports arguments -Wwrite-strings: YES
Compiler for C supports arguments -Wno-address-of-packed-member
-Waddress-of-packed-member: NO
Compiler for C supports arguments -Wno-packed-not-aligned
-Wpacked-not-aligned: NO
Compiler for C supports arguments -Wno-missing-field-initializers
-Wmissing-field-initializers: YES
config/x86/meson.build:14:6: ERROR: Could not get define '__SSE4_2__'
A full log can be found at
/home/runner/work/dpdk/dpdk-v21.02/build/meson-logs/meson-log.txt
Error: Process completed with exit code 1.
"""
1: https://github.com/ovsrobot/dpdk/runs/2355005702
Stick to a compatible configuration passing -Dmachine=default.
Note: the breakage was not seen earlier this week as I guess the CI
workers are using a cached ABI reference for v20.11.
Fixes: 5b3a6ca6fd ("build: alias default build as generic")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
The current machine='default' build name is not descriptive. The actual
default build is machine='native'. Add an alternative string which does
the same build and better describes what we're building:
machine='generic'. Leave machine='default' for backwards compatibility.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Parts of the unit tests code rely on forked/secondary processes
(expectedly) failing.
A crash in those situations could be missed so add a check on coredumps
presence after unit tests have run.
When unit tests fail, it can also help checking for coredumps as it
could give more insights on what happened.
In some situations (like explicit call to rte_panic), coredump generation
must be disabled to avoid false positives.
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Aaron Conole <aconole@redhat.com>
For CI builds, turn on the checking of includes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Mirror the existing gcc jobs - build static and shared libs.
Use arm64_armv8_linux_clang_ubuntu1804 meson cross file.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
v21 ABI will be maintained until v21.11.
Let's use the latest released libabigail 1.8.
In GitHub Actions, libabigail binaries and the ABI reference are stored
in two shared caches as all branches can use the same.
While at it, we can reproduce changes from the commit 0b8086ce3f
("devtools: remove useless files from ABI reference").
This will save some space in the CI caches.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Aaron Conole <aconole@redhat.com>
With the recent changes in terms of free access to the Travis CI, let's
offer an alternative with GitHub Actions.
Running jobs on ARM is not supported unless using external runners, so
this commit only adds builds for x86_64 and cross compiling for i386 and
aarch64.
Differences with the Travis CI integration:
- Error logs are not dumped to the console when something goes wrong.
Instead, they are gathered in a "catch-all" step and attached as
artifacts.
- A cache entry is stored once and for all, but if no cache is found you
can inherit from the default branch cache. The cache is 5GB large, for
the whole git repository.
- The maximum retention of logs and artifacts is 3 months.
- /home/runner is world writable, so a workaround has been added for
starting dpdk processes.
- Ilya, working on OVS GHA support, noticed that jobs can run with
processors that don't have the same capabilities. For DPDK, this
impacts the ccache content since everything was built with
-march=native so far, and we will end up with binaries that can't run
in a later build. The problem has not been seen in Travis CI (?) but
it is safer to use a fixed "-Dmachine=default" in any case.
- Scheduling jobs is part of the configuration and takes the form of a
crontab. A build is scheduled every Monday at 0:00 (UTC) to provide a
default ccache for the week (useful for the ovsrobot).
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Aaron Conole <aconole@redhat.com>
Static builds can take a lot of space, so reduce the number of examples
built when doing those static builds.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
As fast-tests suite generated with only applicable cases included,
hugepage is not a mandatory to run the test.
Ignore the result of hugepage set up, so that validation in environment
without hugepage can proceed.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
For normal developers, those checks are disabled.
Enabling them requires a configuration that will trigger the ABI dumps
generation as part of the existing devtools/test-build.sh and
devtools/test-meson-builds.sh scripts.
Those checks are enabled in the CI for the default meson options on x86
and aarch64 so that proposed patches are validated via our CI robot.
A cache of the ABI is stored in travis jobs to avoid rebuilding too
often.
Checks can be informational only, by setting ABI_CHECKS_WARN_ONLY when
breaking the ABI in a future release.
Explicit suppression rules have been added on internal structures
exposed to crypto drivers as the current ABI policy does not apply to
them.
This could be improved in the future by carefully splitting the headers
content with application and driver "users" in mind.
We currently have issues reported for librte_crypto recent changes for
which suppression rules have been added too.
Mellanox glue libraries are explicitly skipped as they are not part of
the application ABI.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add Travis compilation jobs for native aarch64. gcc/clang compilations
for static/shared libraries are added.
Some limitations for current aarch64 Travis support:
1. Container is used. Huge page is not available due to security reason.
2. Missing kernel header package in Xenial distribution.
Solutions to address the limitations:
1. Not to add unit test for now. And run tests with no-huge in future.
2. Use Bionic distribution for all aarch64 jobs.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
meson 0.53.0 has a compatibility issue [1] with the python 3.5.2 that comes
in Ubuntu 16.04.
On the other hand, the minimal version supported in dpdk is 0.47.1.
Stick to this version to avoid getting hit by regressions in meson latest
shiny release.
1: https://github.com/mesonbuild/meson/issues/6427
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Try to start testpmd with two vdevs without hugepages.
This is a really basic check, but better than nothing.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Add a travis job to build for 32-bit on 64-bit systems to catch additional
build errors, for example, incorrect use of printf specifiers with uint64_t
types.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
-e is preferrable so that we can catch errors in the middle of this
script.
An example is this Travis job [1] that should have errored at the meson
install step rather than go to the build step.
Adding debug mode as it can help post-mortem.
1: https://travis-ci.com/DPDK/dpdk/jobs/223511683
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Michael Santana <msantana@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Install missing dependencies so that doc can be generated.
While at it, explicitly configure that we want the doc to be generated.
Missing dependencies are then reported as an error rather than silently
ignored.
Because of these extra dependencies, only build them in dedicated travis
jobs.
Fixes: ad2b2cfb1e ("ci: enable unit tests with Travis")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
When building under Travis (or another linux CI service), enable
running the fast-tests when the RUN_TESTS environment variable is set.
For the Travis service, introduce two new shared builds, since the
shared builds are the ones passing. Builds that are statically
linked still show some issues in some of the eal_flags tests. We make
new builds for this, rather than piggybacking, because 'at a glance'
it is difficult to determine why a build fails, and if tests were
enabled for all builds, then looking at the logs for any build would
take a significant amount of time.
Finally, the command to invoke fast tests includes a timeout
multiplier, since some CI environments don't have enough resources to
complete the tests in the default 10s timeout period.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Michael Santana <msantana@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The ARM64 config file has been renamed in the commit
ae2f2fee24 ("build: rename linuxapp to linux in meson cross files").
Fixes: 99889bd852 ("ci: introduce Travis builds for GitHub repositories")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
GitHub is a service used by developers to store repositories. GitHub
provides service integrations that allow 3rd party services to access
developer repositories and perform actions. One of these services is
Travis-CI, a simple continuous integration platform.
This series introduces the ability for any github mirrors of the DPDK
project, including developer mirrors, to kick off builds under the
travis CI infrastructure. For now, this just means compilation - no
other kinds of automated run exists yet. In the future, this can be
expanded to execute and report results for any test-suites that might
exist.
This is a simple initial implementation of a travis build for the DPDK
project. It doesn't require any changes from individual developers to
enable, but will allow those developers who opt-in to GitHub and the
travis service to get automatic builds for every push they make.
The files added under .ci/ exist so that in the future, other CI
support platforms (such as cirrus, appveyor, etc.) could have a common
place to put their requisite scripts without polluting the main tree.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Michael Santana <msantana@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
