Add vmdq rx mode field into rx config struct, it is flag from ETH_VMDQ_ACCEPT_*.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The change includes several parts:
1. Clear pool bitmap when trying to remove specific MAC.
2. Define RSS, DCB and VMDQ flags to combine rx_mq_mode.
3. Use 'struct' to replace 'union', which to expand the rx_adv_conf
arguments to better support RSS, DCB and VMDQ.
4. Fix bug in rte_eth_dev_config_restore function, which will restore
all MAC address to default pool.
5. Define additional 3 arguments for better VMDQ support.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Use the enum type for filter type.
It fixes the compilation error under ICC compiler.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add definitions of the data structures of tunneling packet filter.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add two functions to support UDP tunneling port configuration.
There are "some" destination UDP port numbers that have unique meaning.
In terms of VxLAN, "IANA has assigned the value 4789 for the VXLAN UDP port,
and this value SHOULD be used by default as the destination UDP port.
Some early implementations of VXLAN have used other values for the destination
port. To enable interoperability with these implementations, the destination
port SHOULD be configurable."
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Define a new API umbrella to configure any kind of Rx filtering.
New functions:
- rte_eth_dev_filter_supported
- rte_eth_dev_filter_ctrl
Filter types, operations, and structures are defined specifically in new
header file lib/librte_eth/rte_dev_ctrl.h.
As to the implementation discussion, please refer to
http://dpdk.org/ml/archives/dev/2014-September/005179.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
[Thomas: rename ops and remove unused types]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Forced type conversion is not needed to define a macro with
constant. The alternate is to let compiler use the default width,
or specify the width with suffix of 'U', 'UL', 'ULL', etc.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Commit fbde27f1 (get default Rx/Tx configuration from dev info),
introduced a bug, which caused memory corruption in dev_info.
To get RX/TX configuration, both rx/tx queue setup functions were calling
dev_info_get from PMDs, so dev_info structure was not being reseted
before being populated.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf
structures. This patch allows the user to get a default optimal RX/TX configuration
through rte_eth_dev_info get, and still any parameters may be tweaked as wished,
before setting up queues.
Besides, if a NULL pointer is passed to rte_eth_rx_queue_setup or
rte_eth_tx_queue_setup, these functions get internally the default RX/TX
configuration for the user.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
[Thomas: split patch]
To guarantee that RX/TX configuration structures are reseted
before modifying them, plus the other dev info fields,
dev info structure is zeroed beforehand.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Rename start_?x_per_q to ?x_deferred_start
and add comments.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This method can be implemented by a poll mode driver to provide
non-standard statistics (which are not part of the generic statistics
structure). Each statistic is returned in a generic form: "name" and
"value" and can be used to dump PMD-specific statistics in the same way
than ethtool in linux kernel.
If the PMD does not provide the xstats_get and xstats_set functions, the
ethdev API will return the generic statistics in the xstats format
(name, value).
This commit opens the door for a clean-up of the generic statistics
structure, only keeping statistics that are really common to all PMDs
and moving specific ones into the xstats API.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
[Thomas: fix some comments]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
cppcheck reports show that is_local_admin_ether_addr() was broken:
Expression '(X & 0x2) == 0x1' is always false
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The commit 83b41136934 (add unique name to devices) didn't compile if
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG is enabled.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The commit 8dbe82b0733 (Tx rate limitation) didn't compile if
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG is enabled.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Adding support to rte_eth_dev_data structure to support unique
name identifier for ethdevs to support adding slave ethdevs
(specifically virtual devices which have no public unique
identifier) to a link bonding device. This changes the API
rte_eth_dev_allocate() to require a const char *name when
allocating a ethdev, which also verifies that the name is
unique and hasn’t been already used by an existed allocated
rte_eth_dev. Also contains updates to virtual pmd’s to now call
the API with a name parameter.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Only some devices support the link state interrupt configuration option.
Link state control does not work in virtual drivers
(virtio, vmxnet3, igbvf, and ixgbevf). Instead of having the application
try and guess whether it will work or not provide a driver flag that
can be checked instead.
Note: if device driver doesn't support link state control, what
would happen previously is that the code would never detect link
transitions. This prevents that.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: rename flag]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It is now possible to read link status updated by interrupt without
having manual link_update() service provided by the PMD.
Indeed link_update() is useless in interrupt case. So check of this
function pointer must be done in the interrupt case only.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch adds two new functions in ethdev api to retrieve current MTU and
change MTU of a port.
Only .mtu_set function is pmd specific.
pmd should update its max_rx_pkt_len if needed.
This operation has been implemented for rte_em_pmd, rte_igb_pmd and
rte_ixgbe_pmd.
Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com>
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
We might want to be sure the scatter packets reception handler is selected in a
pmd. This makes it possible to then change mtu later, without the need of
restarting a port.
It is then the pmd duty to tell it enabled the scatter reception handler by
setting dev->data->scattered_rx to 1.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This avoids code duplication in PMD when dealing with mtu changes.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add autoneg field in flow control parameters.
This makes it easier to understand why changing some parameters does not always
have the expected result.
Changing autoneg is not supported at the moment.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds a new function in ethdev api to retrieve current flow control
configuration.
This operation has been implemented for rte_em_pmd, rte_igb_pmd and
rte_ixgbe_pmd.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
To support i40e, new ops has been added to support setting
port based vlan insertion.
New command 'tx_vlan set pvid port_id vlan_id (on|off)'
has been added in testpmd to configure port based vlan insertion.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
To support i40e, function is_same_ether_addr() has been added to
compare two ethernet address.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
- i40e RSS flags have been added (and enlarged to 64-bit)
- A new configuration of 'uint8_t rss_key_len' has been added in
'struct rte_eth_rss_conf' to support different length of RSS keys.
- In each PMD, only the supported flags are masked.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
In ethdev, it ignores setting maximum packet length to less than
1518. The changes is to remove this limitation and let less than
1518 can be set for 'maximum packet length'.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Split input error stats to have a better understanding of why packets
have been dropped.
Keep ierrors field untouched for backward compatibility.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds APIs for NIC filters list below:
ethertype filter, syn filter, 2tuple filter, flex filter, 5tuple filter
Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add API to support setting TX rate for a queue and a VF.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
This patch adds API to support the functionality of setting link up and down.
It can be used to repeatedly stop and restart RX/TX of a port without
re-allocating resources for the port and re-configuring the port.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
icc 12.1 complains about RTE_LOG() format:
"argument is incompatible with corresponding format string conversion"
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch adds API to support queue start and stop functionality for RX/TX.
It allows RX and TX queue is started or stopped one by one, instead of starting
and stopping all of them at the same time.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Add a new function "rss_hash_conf_get" in the PMD API to retrieve the
current configuration of the RSS functions and/or of the RSS key used
by a NIC to compute the RSS hash of input packets.
The new function uses the existing data structure "rte_eth_rss_conf" for
returning the RSS hash configuration.
2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_conf_get" and the
igb-specific function "eth_igb_rss_hash_conf_get" to retrieve the RSS
hash configuration of ixgbe and igb controllers respectively.
3) Add the command "show port X rss-hash [key]" in the testpmd application
to display the RSS hash configuration of port X.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Add a new function "rss_hash_update" in the PMD API to dynamically
update the RSS flags and/or the RSS key used by a NIC to compute the RSS
hash of input packets.
The new function uses the existing data structure "rte_eth_rss_conf" for
the argument that contains the new hash flags and/or the new hash key to
use.
2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_update" and the
igb-specific function "eth_igb_rss_hash_update" to update the RSS
hash configuration of ixgbe and igb controllers respectively.
Before changing anything, these 2 functions check that the update RSS
operation does not attempt to disable RSS, if RSS was enabled at port
initialization time, or does not attempt to enable RSS, if RSS was
disabled at port initialization time.
Note:
Configuring the RSS hash flags and the RSS key used by a NIC consists in
updating appropriate PCI registers of the NIC.
These operations have been manually tested with the interactive commands
"write reg" and "write regbit" of the testpmd application.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Each entry of the RSS redirection table (RETA) of igb and ixgbe ports
contains a 4-bit RX queue index, thus imposing RSS RX queue indices to
be strictly lower than 16.
In addition, if a RETA entry is configured with a RX queue index that is
strictly lower than 16, but is greater or equal to the number of RX queues
of the port, then all input packets whose RSS hash value indexes that RETA
entry are silently dropped by the NIC.
Make the function rte_eth_dev_rss_reta_update() check that RX queue indices
that are supplied in the reta_conf argument are strictly lower than
ETH_RSS_RETA_MAX_QUEUE (16) and are strictly lower than the number of
RX queues of the port.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Now that we've converted all the pmds in dpdk to use the driver registration
macro, rte_pmd_init_all has become empty. As theres no reason to keep it around
anymore, just remove it and fix up all the eample callers.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the vmxnet3 pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the vmxnet3 library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the virtio pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the virtio library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the ixgbevf pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the ixgbevf library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the ixgbe pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the ixgbe library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the igbvf pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the igbvf library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the igb pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the igb library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
