Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
The reta_size being indicated in the bnxt_dev_info_get_op was incorrect.
Set it to the value supported by the hardware.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Tested-by: Randy Schacher <stuart.schacher@broadcom.com>
Firmware can restrict access to certain resources in the hardware
depending on various factors. In such cases when the PMD tries to
configure these resources the firmware will return
HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED error. Parse this and return
the standard EACCES error to the applications.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In bnxt_hwrm_flash_nvram, before attempting to allocate a buffer
we are grabbing the rte_spinlock. And if the allocation fails we
are returning before releasing the spinlock. We avoid the situation
by calling HWRM_PREP which grabs the lock after the buffer is
allocated successfully.
Fixes: 19e6af01bb ("net/bnxt: support get/set EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
In some cases we may not be freeing up memory allocated for certain
NVM commands because the code might have bailed out before reaching
rte_free(). This patch moves some code around to ensure the allocated
memory is freed before exiting the function.
Fixes: 19e6af01bb ("net/bnxt: support get/set EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Michael Wildt <michael.wildt@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
bnxt_clear_hwrm_vnic_filters() was removing the created filter from HW,
but not clearing the internal data structures by removing it from the
struct bnxt_vnic_info->filter list.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Setting of VLAN filter cmd was being done with incorrect flag value.
We need to use inner vlan fields instead of outer vlan.
Fixes: 7fe5668d2e ("net/bnxt: support VLAN filter and strip")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fixed size of fw_grp_ids in VNIC is limiting the number of Rx rings
being created. With this patch we are allocating fw_grp_ids dynamically,
allowing us to get over this artificial limit.
Fixes: 9738793f28 ("net/bnxt: add VNIC functions and structs")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If HWRM resource manager is enabled, check VF resources before proceeding.
Make sure there are enough resources allocated and return an error in case
of insufficient error.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While moving a flow to a different destination queue,
the l2_filter_id being passed to the FW command was incorrect.
Fix it by re-using the matching filter's l2_filter_id since
that is supposed to be the same in this case.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
rte_mbuf_data_iova returns a 64-bit address. But we are incorrectly
using only 32-bits of that. Use rte_cpu_to_le_64 instead of
rte_cpu_to_le_32
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is no need to update bnxt_hwrm_vnic_plcmode_cfg if new MTU is
not greater than the max data the mbuf can accommodate.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In bnxt_free_filter_mem(), check the filter type and call the
appropriate HWRM command to clear the filter from HW.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The L2 filter id is needed in many scenarios particularly when
we are repurposing the same ntuple filter with different destination
queues. This patch reverts a commit in which the L2 filter id was being
reset in clear_ntuple_filter().
Fixes: 1383434c90 ("net/bnxt: reset L2 filter id once filter is freed")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
When using multi-mbuf to xmit large packets, we need to use total
packet lengths (sum of all segments) to set txbd->flags_type.
Packets will not be sent when using tx_pkt->data_len(The first
segment of packets).
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Xiaoxin Peng <xiaoxin.peng@broadcom.com>
Reviewed-by: Herry Chen <herry.chen@broadcom.com>
Reviewed-by: Jason He <jason.he@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
update HWRM API to v1.9.2.9
Signed-off-by: Rob Miller <rob.miller@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Passing an invalid fw_vnic_id to the firmware will cause the
bnxt_hwrm_vnic_plcmode_cfg command to fail.
Add a check for VNIC id before sending message to firmware.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In preparation of more rte_flow support it has been decided to
separate out filter and flow into their own files. Functionally the
same.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Move check_zero_bytes into new bnxt_util.h file.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Packets destined to the to-be-stopped queue should not be dropped
(neither in HW nor in the driver), so re-program the RSS Table without
this queue on stop and add it back to the table on start unless it
is a Representor VF.
Since 0th entry is used for default ring, use fw_grp_id + 1 to change
the RSS table population logic by programming valid IDs instead of the
default zeroth entry in case of an invalid fw_grp_id.
Destroy and recreate the trio of Rx rings(compl, Rx, AG) every time in
start so that HW is in sync with software.
Fixes: 9b63c6fd70 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add more checks for checksum calculation offload.
Also check for tunnel frames and select the proper
buffer descriptor size.
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Xiaoxin Peng <xiaoxin.peng@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Jason He <jason.he@broadcom.com>
Reviewed-by: Qingmin Liu <qingmin.liu@broadcom.com>
We are not cleaning up all the memory and also not unregistering
the driver during device close operation. This patch fixes the issue.
Fixes: 8930749513 ("net/bnxt: free memory in close operation")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1) Use nb_rx_pkts instead of checking producer indices of Rx and
aggregator rings to decide if any Rx completions were processed.
2) Post Rx buffers early in Rx processing instead of waiting for
the budgeted burst quota.
3) Ring Rx CQ DB after Rx buffers are posted.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Batch more than one Tx requests such that only one completion
is generarted by the HW. We request a Tx completion for first
and last Tx request in the batch.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
PORT_CLR_STATS is not allowed for VFs, NPAR, MultiHost functions
or when SR-IOV is enabled.
Don't send the HWRM command in such cases.
Fixes: bfb9c2260b ("net/bnxt: support xstats get/reset")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The xstats API expects that the driver fills both values and ids for
each filled entries.
Fixes: bfb9c2260b ("net/bnxt: support xstats get/reset")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
For frames where the hardware is not able to calculate checksum
we are indicating such frames to be bad. And that is incorrect.
Indicate PKT_RX_IP_CKSUM_UNKNOWN or PKT_RX_L4_CKSUM_UNKNOWN
for such frames.
Fixes: 7ec39d8c52 ("net/bnxt: update status of Rx IP/L4 CKSUM")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Query of port stats is permitted for VF interfaces as well.
Fix the code to allow VFs to query port stats.
Fixes: bfb9c2260b ("net/bnxt: support xstats get/reset")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If the resource requirement of a VF is more than what is allotted
to it by the FW, a VF can request to reallocate some of the resources.
This is possible only when the NIC is running the Resource Manager aware
CHiMP FW.
If necessary, calculate Tx and Rx ring count using the new RM API.
Otherwise use the Tx and Rx ring count as-is. Update the cp ring count
based on the Tx and Rx ring count.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In order to save completion resource, use the first completion ring from
PF or VF as the default completion ring for async event & HWRM forward
response handling. Add bnxt_hwrm_set_async_event_cr() to set
async_event_cr for either PF or VF.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While configuring RSS, the FW needs to know the rss_hash_mode that needs
to be initialized.
Set hash mode to HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT
to allow the FW to use the global mode already configured in the device.
Fixes: bcd4bcc442 ("net/bnxt: configure RSS")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We were initializing Tx and Rx burst functions only for primary
processes. Fixing it in this patch.
Fixes: 8892013668 ("net/bnxt: support xstats get by id")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The FALLTHROUGH comment for cascading switch cases was missing in
a few places. This patch adds that.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds new NVM specific HWRM commands.
Code using these commands will be added in future patches.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add HWRM structures to support more filtering features
like metering, tunnel filters and more.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Clear HWRM sniffer list for DPDK PFs so that VFs on
DPDK PFs initialize successfully. DPDK PF driver does not
handle HWRM commands from VFs.
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
VNIC ID returned by the FW is a 16-bit field.
We are incorrectly using it as a 32-bit value in few places.
This patch corrects that.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Michael Wildt <michael.wildt@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
In the start/stop_op operation, mbufs allocated for rings were not freed
1) add bnxt_free_tx_mbuf/bnxt_free_rx_mbuf in bnxt_dev_stop_op to free MBUF
before freeing the rings.
2) MBUF allocation and free routines were not in sync. Allocation uses the
ring->ring_size including any rounded up and multiple factors while the
free routine uses the requested queue size.
Fixes: c09f57b49c ("net/bnxt: add start/stop/link update operations")
Cc: stable@dpdk.org
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Xiaoxin Peng <xiaoxin.peng@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
clear flag on stop at proper location to avoid race conditions.
Fixes: ed2ced6fe9 ("net/bnxt: check initialization before accessing stats")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
