Since now the private session data is initialized after
the session pool is created, there is no need to keep
this PMD function.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The session mempool pointer is needed in each queue pair,
if session-less operations are being handled.
Therefore, the API is changed to accept this parameter,
as the session mempool is created outside the
device configuration function, similar to what ethdev
does with the rx queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Change crypto device's session management to make it
device independent and simplify architecture when session
is intended to be used on more than one device.
Sessions private data is agnostic to underlying device
by adding an indirection in the sessions private data
using the crypto driver identifier.
A single session can contain indirections to multiple device types.
New function rte_cryptodev_sym_session_init has been created,
to initialize the driver private session data per driver to be
used on a same session, and rte_cryptodev_sym_session_clear
to clear this data before calling rte_cryptodev_sym_session_free.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Mempool pointer can be obtained from the object itself,
which means that it is not required to actually store the pointer
in the session.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since crypto session will not be attached to a specific
device or driver, the field driver_id is not required
anymore (only used to check that a session was being
handled by the right device).
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Device id is necessary in the crypto session,
as it was only used for the functions that attach/detach
a session to a queue pair.
Since the session is not going to be attached to a device
anymore, this is field is no longer necessary.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Device id is going to be removed from session,
as the session will be device independent.
Therefore, the functions that attach/dettach a session
to a queue pair need to be updated, to accept the device id
as a parameter, apart from the queue pair id and the session.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of creating the session mempool while configuring
the crypto device, apps will create the mempool themselves.
This way, it gives flexibility to the user to have a single
mempool for all devices (as long as the objects are big
enough to contain the biggest private session size) or
separate mempools for different drivers.
Also, since the mempool is now created outside the
device configuration function, now it needs to be passed
through this function, which will be eventually passed
when setting up the queue pairs, as ethernet devices do.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Provide a function to get the private session size
of any crypto device (specifically, to its crypto driver).
This will be useful once the session mempool is created
outside the library.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Prior to removing the session pool creation from cryptodev
configure function, session init function needs to be
separated from the pool creation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Cryptodev session structure was a duplication of the
cryptodev symmetric structure.
It was used by some PMDs that should use the symmetric
structure instead.
Since this structure was internal, there is no deprecation
notice required.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Remove crypto device driver name string definitions from librte_cryptodev,
which avoid to library changes every time a new crypto driver was added.
The driver name is predefined internaly in the each PMD.
The applications could use the crypto device driver names based on
options with the driver name string provided in command line.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Changes device type identification to be based on a unique
driver id replacing the current device type enumeration, which needed
library changes every time a new crypto driver was added.
The driver id is assigned dynamically during driver registration using
the new macro RTE_PMD_REGISTER_CRYPTO_DRIVER which returns a unique
uint8_t identifier for that driver. New APIs are also introduced
to allow retrieval of the driver id using the driver name.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
while registering driver to dpaa2, hard coded string is used.
It is now updated as per the latest changes in string name.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Now that AAD is only used in AEAD algorithms,
there is no need to keep AAD in the authentication
structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Now that all the structures/functions for AEAD algorithms
are in place, migrate the two supported algorithms
AES-GCM and AES-CCM to these, instead of using
cipher and authentication parameters.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
AEAD operation parameters can be set in the new
aead structure, in the crypto operation.
This structure is within a union with the cipher
and authentication parameters, since operations can be:
- AEAD: using the aead structure
- Cipher only: using only the cipher structure
- Auth only: using only the authentication structure
- Cipher-then-auth/Auth-then-cipher: using both cipher
and authentication structures
Therefore, all three cannot be used at the same time.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
AEAD algorithms such as AES-GCM needed to be
used as a concatenation of a cipher transform and
an authentication transform.
Instead, a new transform and functions to handle it
are created to support these kind of algorithms,
making their use easier.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
AES-GMAC is an authentication algorithm, based on AES-GCM
without encryption. To simplify its usage, now it can be used
setting the authentication parameters, without requiring
to concatenate a ciphering transform.
Therefore, it is not required to set AAD, but authentication
data length and offset, giving the user the option
to have Scatter-Gather List in the input buffer,
as long as the driver supports it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Digest length was duplicated in the authentication transform
and the crypto operation structures.
Since digest length is not expected to change in a same
session, it is removed from the crypto operation.
Also, the length has been shrunk to 16 bits,
which should be sufficient for any digest.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Additional authenticated data (AAD) information was duplicated
in the authentication transform and in the crypto
operation structures.
Since AAD length is not meant to be changed in a same session,
it is removed from the crypto operation structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
For wireless algorithms (SNOW3G, KASUMI, ZUC),
the IV for the authentication algorithms (F9, UIA2 and EIA3)
was taken from the AAD parameter, as there was no IV parameter
in the authentication structure.
Now that IV is available for all algorithms, there is need
to keep doing this, so AAD is not used for these algorithms
anymore.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Authentication algorithms, such as AES-GMAC or the wireless
algorithms (like SNOW3G) use IV, like cipher algorithms.
So far, AES-GMAC has used the IV from the cipher structure,
and the wireless algorithms have used the AAD field,
which is not technically correct.
Therefore, authentication IV parameters have been added,
so API is more correct. Like cipher IV, auth IV is expected
to be copied after the crypto operation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV parameters (offset and length) should not
change for operations in the same session, these parameters
are moved to the crypto transform structure, so they will
be stored in the sessions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV now is copied after the crypto operation, in
its private size, IV can be passed only with offset
and length.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
In order to facilitate the access to the private data,
after the crypto operation, two new macros have been
implemented:
- rte_crypto_op_ctod_offset(c,t,o), which returns a pointer
to "o" bytes after the start of the crypto operation
(rte_crypto_op)
- rte_crypto_op_ctophys_offset(c, o), which returns
the physical address of the data "o" bytes after the
start of the crypto operation (rte_crypto_op)
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
rte_crypto_op and rte_crypto_sym_op structures
were marked as cache aligned.
However, since these structures are always initialized
in a mempool, this alignment is useless, since the mempool
forces the alignment of its objects.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Instead of storing a pointer to operation specific parameters,
such as symmetric crypto parameters, use a zero-length array,
to mark that these parameters will be stored after the
generic crypto operation structure, which was already assumed
in the code, reducing the memory footprint of the crypto operation.
Besides, it is always expected to have rte_crypto_op
and rte_crypto_sym_op (the only operation specific parameters
structure right now) to be together, as they are initialized
as a single object in the crypto operation pool.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Storing a pointer to the user data is unnecessary,
since user can store additional data, after the crypto operation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Instead of storing some crypto operation flags,
such as operation status, as enumerations,
store them as uint8_t, for memory efficiency.
Also, reserve extra 5 bytes in the crypto operation,
for future additions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Session type (operation with or without session) is not
something specific to symmetric operations.
Therefore, the variable is moved to the generic crypto operation
structure.
Since this is an ABI change, the cryptodev library version
gets bumped.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Flag dev_started should be cleared after dev_stop() function call
because the flag is checked inside the dev_stop() function.
Fixes: d11b0f30df88 ("cryptodev: introduce API and framework for crypto devices")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add PCI probe/remove/init/uninit functions in a separate
file rte_cryptodev_pci.h, which do not use cryptodev driver,
in order to be removed in next commits.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Call rte_cryptodev_pmd_release_device() if probing a
PCI crypto device, instead of accessing the variables
directly. This will be useful when rte_cryptodev_pci_probe()
gets moved to a separate file.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Move all functions handling virtual devices to a separate
header file "rte_cryptodev_vdev.h", in order to leave only
generic functions for any device in the rest of the files.
It also creates the file "rte_cryptodev_pmd.c", with the
implementations of these functions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Do not set PCI information in the device information structure
for any crypto device, just for the ones that are PCI, so
this is set internally in the PCI crypto PMDs (only QAT now).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
rte_cryptodev_devices_get() function returns an array of devices
sharing the same driver.
Instead of having two different paths depending on the device being
virtual or physical, retrieve the driver name from rte_device structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
rte_cryptodev_devices_get() function was parsing a crypto
device name as an argument, but the function actually
returns device identifiers of devices that share the
same crypto driver, so the argument should be driver name, instead.
Fixes: 38227c0e3ad2 ("cryptodev: retrieve device info")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When retrieving device information for a crypto driver,
driver name was only set when it was a PCI driver.
Getting the driver name from rte_device structure
allows rte_cryptodev_get_info() function to return it
regardless they are virtual or physical devices.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Only non virtual devices were storing the pointer to
rte_device structure in rte_cryptodev, which will be needed
to retrieve the driver name for any device.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Socket id parsed from the user was checked
if it was in the range of available sockets.
This check is unnecessary, as the socket specified
might not have memory anyway, so it will fail
at memory allocation.
Therefore, the best solution is to remove this check.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The VDEV code will move to the bus drivers directory.
Rename functions from rte_eal_vdev_ to rte_vdev_
to prepare the move of the driver out of EAL.
The prefix rte_eal_vdrv_ is also renamed to rte_vdev_.
It was used for registration of vdev drivers.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The PCI code will move to the bus drivers directory.
Rename functions from rte_eal_pci_ to rte_pci_
to prepare the move of the driver out of EAL.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The RTE_FUNC_*_RET() and RTE_PROC_*_RET() macro definitions in rte_dev.h
require RTE_PMD_DEBUG_TRACE(). This macro is defined as needed by users of
rte_dev.h since its value depends on their own debug settings.
It may be defined multiple times as a result when including files from
various components simultaneously. Worse, these redefinitions may be
inconsistent. This causes the following compilation errors:
In file included from /tmp/check-includes.sh.13890.c:27:0:
build/include/rte_eventdev_pmd.h:58:0: error: "RTE_PMD_DEBUG_TRACE"
redefined [-Werror]
[...]
In file included from build/include/rte_ethdev_pci.h:39:0,
from /tmp/check-includes.sh.13890.c:13:
build/include/rte_ethdev.h:1042:0: note: this is the location of the
previous definition
[...]
In file included from /tmp/check-includes.sh.13890.c:83:0:
build/include/rte_cryptodev_pmd.h:65:0: error: "RTE_PMD_DEBUG_TRACE"
redefined [-Werror]
[...]
In file included from /tmp/check-includes.sh.13890.c:27:0:
build/include/rte_eventdev_pmd.h:58:0: note: this is the location of
the previous definition
[...]
This commit moves the RTE_PMD_DEBUG_TRACE() definition to rte_dev.h where
it is enabled consistently depending on global configuration settings and
removes redundant definitions.
Also when disabled, RTE_PMD_DEBUG_TRACE() is now defined as (void)0 to
avoid empty statements warnings if used outside { } blocks.
Fixes: b974e4a40cb5 ("ethdev: make error checking macros public")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
