l3fwd-power uses `--parse-ptype' parameter to query egress packets
type. Before that feature is enabled l3fwd-power verifies PMD ability
to advertise supported packet types with
rte_eth_dev_get_supported_ptypes().
The above ethdev function API contains this note:
"
Better to invoke this API after the device is already started or rx burst
function is decided, to obtain correct supported ptypes.
"
The patch updates code for PMDs that register supported types after
dev_start.
Fixes: 82bea4661626 ("examples/l3fwd-power: add --parse-ptype option")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Currently, the interrupt status notification prevents log spam by
remembering whether previous interrupt wakeup was due to traffic or due
to timeout expiring. However, it is a single variable that can
potentially be accessed from multiple threads, so it is not thread-safe.
Fix it by having per-lcore interrupt status.
Fixes: f4d1e19c293d ("examples/l3fwd-power: add Rx interrupt timeout")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Tested-by: Xi Zhang <xix.zhang@intel.com>
Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
rte_eth_dev_stop() return value was changed from void to int,
so this patch modify usage of this function across examples
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add usage of rte_eth_link_to_str function to example
applications.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Giving invalid or zero portmask as command line option to
these applications will have an unexpected response.
The reason behind this is that the return value of function
that parses portmask is stored in a variable whose datatype is
unsigned int, hence returning -1 in case of zero or
invalid portmask causes an unexpected behaviour.
If we return 0 instead of -1 this issue can be resolved.
The program already contains the functionality to print
"invalid portmask" and program usage if zero is returned.
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Currently, the application does support running without the power
library being initialized, but it has to be specifically requested. On
platforms without support for frequency scaling using the power library,
we can just enable interrupt-only mode by default.
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Harman Kalra <hkalra@marvell.com>
In addition to existing modes, add a mode which is very similar to
legacy mode, but does not do frequency scaling, and thus does not
depend on the power library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Currently, legacy mode is the implicit default, but it is not possible
to directly request using legacy mode. Add the argument to enable
requesting legacy mode, and also make it the default.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, l3fwd-power will attempt to run even if the power env
is set to KVM, which is not supported. Fix this by preventing the
app from initializing unless the env is set to one of the supported
modes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Currently, interrupts are enabled in telemetry and empty poll modes, but
they are not used. Switch to disabling interrupts by default, and only
enable interrupts for modes that require them.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Currently, thread waiting on an interrupt does not have a timeout, so
it will not ever wake up until traffic arrives. This means that, when
time comes to exit the application, it will not quit unless there
happens to be traffic coming in and waking up the thread from sleep.
Fix it so that the interrupt thread sleeps for 10ms before waking up
and attempting to poll again. Additionally, remove the log message
to avoid spamming about entering interrupt mode.
Fixes: 613ce6691c0d ("examples/l3fwd-power: implement proper shutdown")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Tested-by: Lihong Ma <lihongx.ma@intel.com>
This patch moves telemetry further down the build, and adds it as a
dependency for EAL. Telemetry V2 is now configured to build by default,
and the legacy support is built when the telemetry config flag is set.
Telemetry now has EAL flags, shown below:
"--telemetry" = Enables telemetry (this is default if no flags given)
"--no-telemetry" = Disables telemetry
When telemetry is enabled, it will attempt to open the new socket
version, and also the legacy support socket (this will depend on Jansson
external dependency and telemetry config flag, as before).
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The l3fwd-power example app now registers a stats command with
telemetry, and provides a callback function to handle formatting the
power stats.
An example usage is shown below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 20.05.0-rc0", "pid": 63384, "max_output_len": 16384}
--> /
{"/": ["/", "/ethdev/link_status", "/ethdev/list", "/ethdev/xstats", \
"/help", "/info", "/l3fwd-power/stats", "/rawdev/list", \
"/rawdev/xstats"]}
--> /l3fwd-power/stats
{"/l3fwd-power/stats": {"empty_poll": 281625000, "full_poll": 0, \
"busy_percent": 0}}
The existing stats tracking done by the app using the metrics
library is unaffected. This will still be used to ensure backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Currently, shutdown for l3fwd-power application is all over the place
and may or may not happen either in the signal handler or in the main()
function. Fix this so that the signal handler will only set the exit
variable, thereby allowing all of the loops to end properly and proceed
to deinitialize everything.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Currently, if power library initialization fails, only a log message is
displayed. This is suboptimal for a number of reasons, but the main one
is that telemetry mode does not depend on the power library and can
therefore run in environments where l3fwd-power would normally not run
correctly (such as inside a VM). This will lead to attempts to
deinitialize the power library on exit, with a subsequent forced unclean
shutdown of DPDK.
Fix this by only initializing the power library in modes that actually
need it, and change a log message to a failure to initialize.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Since all related queues' interrupts are turned on before epoll, we need
to turn off all the interrupts after wakeup. This patch fixes the issue
of only turning off the interrupted queues.
Fixes: b736d64787fc ("examples/l3fwd-power: disable Rx interrupt when waking up")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Tested-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: Liang Ma <liang.j.ma@intel.com>
Tested-by: Liang Ma <liang.j.ma@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Use RTE_DIM macro to calculate array size.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Interrupt will not be received when disabling RX interrupt without
synchronization mechanism sometimes which leads to wake up issue.
Add spinlock to fix it.
Fixes: b736d64787 ("examples/l3fwd-power: disable Rx interrupt when waking up")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Marvin Liu <yong.liu@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across examples according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Modify l3fwd and related example apps to use locally defined port_conf
instead of global rte_eth_devices which is not a part of public API.
Apps should not be using internal DPDK data structures directly.
Fixes: 1ef9600b2d20 ("examples/l3fwd: convert to ethdev offloads API")
Fixes: ba8c103d2455 ("examples/l3fwd-acl: convert to new ethdev offloads API")
Fixes: 40df1d7a695d ("examples/l3fwd-power: convert to new ethdev offloads API")
Fixes: 43fc038262b8 ("examples/l3fwd-vf: convert to new ethdev offloads API")
Fixes: 373149c631fe ("examples/performance-thread: convert to new offloads API")
Cc: stable@dpdk.org
Signed-off-by: Marcin Zapolski <marcinx.a.zapolski@intel.com>
Current implementation only outputs 3 numbers for busyness, 0, 50 and 100.
Fix this so that the 50% is replaced by a curve, more meaningful.
This can be replaced in each use case by a suitable calculation for
that use case.
Fixes: 609e79841fcf ("examples/l3fwd-power: add telemetry mode")
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
6 issues caught by Coverity 343465
* Possible divide by zero on 3 lines
* Convert to float then back to int, losing precision on 3 lines
This patch modifies the code so that it only assigns calculated
values if the divisor is > 0, otherwise sets metrics to zero.
Also removes the un-needed round() function.
Coverity issue: 343465
Fixes: 609e79841fcf ("examples/l3fwd-power: add telemetry mode")
Signed-off-by: David Hunt <david.hunt@intel.com>
Add new telemetry mode support for l3fwd-power.
This is a standalone mode, in this mode l3fwd-power
does simple l3fwding along with calculating
empty polls, full polls, and busy percentage for
each forwarding core. The aggregation of these
values of all cores is reported as application
level telemetry to metric library for every 500ms from the
master core.
The busy percentage is calculated by recording the poll_count
and when the count reaches a defined value the total
cycles it took is measured and compared with minimum and maximum
reference cycles and busy rate is set according to either 0% or
50% or 100%.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch replaces the rte_exit routine with error printing when
init_power_library() fails and by that restores the previous behavior
of the program (which was to issue an error message and continue
working if init_power_library fails). This allows the user to still
experience the Rx interrupts feature of the DPDK demonstrated in
this program.
Fixes: f88e7c175a68 ("examples/l3fwd-power: add high/regular perf cores options")
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: David Hunt <david.hunt@intel.com>
main.c(376): error #592: variable "lcore_id" is used before its value is set
RTE_SET_USED(lcore_id);
^
The variables were voided with RTE_SET_USED without an obvious reason.
Removing these voidings should avoid the icc error.
Fixes: a137d012 ("examples/l3fwd-power: support traffic pattern aware control")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the support for new traffic pattern aware power control
power management API.
Example:
./l3fwd-power -l xxx -n 4 -w 0000:xx:00.0 -w 0000:xx:00.1 -- -p 0x3
-P --config="(0,0,xx),(1,0,xx)" --empty-poll="0,0,0" -l 14 -m 9 -h 1
Please Reference l3fwd-power document for full parameter usage
The option "l", "m", "h" are used to set the power index for
LOW, MED, HIGH power state. Only is useful after enable empty-poll
--empty-poll="training_flag, med_threshold, high_threshold"
The option training_flag is used to enable/disable training mode.
The option med_threshold is used to indicate the empty poll threshold
of modest state which is customized by user.
The option high_threshold is used to indicate the empty poll threshold
of busy state which is customized by user.
Above three option default value is all 0.
Once enable empty-poll. System will apply the default parameter if no
other command line options are provided.
If training mode is enabled, the user should ensure that no traffic
is allowed to pass through the system. When training phase complete,
the application transfer to normal operation
System will start running with the modest power mode.
If the traffic goes above 70%, then system will move to High power state.
If the traffic drops below 30%, the system will fallback to the modest
power state.
Example code use master thread to monitoring worker thread busyness.
The default timer resolution is 10ms.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Reviewed-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Added high/regular performance core pinning configuration options
that can be used in place of the existing 'config' option.
'--high-perf-cores CORELIST' option allow the user to specify a
high performance cores list; if this option is not used and the
'perf-config' option is used, the application will query the
system using the rte_power library in order to get a list of
available high performance cores. The cores that are considered
high performance are the cores that have turbo enabled.
'--perf-config (port,queue,hi_perf,lcore_index)'
option is similar to the existing config option, the cores are specified
as indices for bins containing high or regular performance cores.
Example:
l3fwd-power -l 6,7 -- -p 0xff \
--high-perf-cores 6 --perf-config="(0,0,0,0),(1,0,1,0)"
cores 6 and 7 are used, core 6 is specified as a high performance core.
port 0 queue 0 will use a regular performance core, index 0 (core 7)
port 1 queue 0 will use a high performance core, index 0 (core 6)
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware
This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.
Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.
Fixes: aa1a6d87f15d ("ethdev: force RSS offload rules again")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
