When the vector pmd was receiving a mix of packets of various sizes,
some of which were split across multiple mbufs, there was an issue
with reassembly of the jumbo frames. This was due to a skipped increment
when using "continue" in a while loop. Changing the loop to a "for"
loop fixes this problem, by ensuring the increment is always performed.
Reported-by: Prashant Upadhyaya <praupadhyaya@gmail.com>
Reported-by: Martin Weiser <martin.weiser@allegro-packets.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Martin Weiser <martin.weiser@allegro-packets.com>
ixgbe is little endian, but cpu maybe not.
add necessary conversions.
rte_cpu_to_le_32(...) for PCI write
rte_le_to_cpu_32(...) for PCI read.
Signed-off-by: Xuelin Shi <xuelin.shi@freescale.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
e1000 is little endian, but cpu maybe not.
add necessary conversions.
rte_cpu_to_le_32(...) for PCI write
rte_le_to_cpu_32(...) for PCI read.
Signed-off-by: Xuelin Shi <xuelin.shi@freescale.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Variables are unsigned int but format scans for signed int.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Building shared libraries and using virtio PMD results in undefined
reference to 'rte_eal_iopl_init'.
Add missing function to eal version map.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The argument ressize contains the size of the result buffer which
should be large enough to store the parsed result of a token. In
this case, it should be larger or equal to sizeof(cmdline_portlist_t)
(4 bytes), not PORTLIST_TOKEN_SIZE which is the max size of the token
string.
This is not a critical, it fixes cases where the total length of the
parsed instruction is greater than the maximum.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
rte_eth_bond_8023ad_setup and rte_eth_bond_8023ad_conf_get entries need
to be exported to be used by test application for shared libraries
compilation.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Link up and down implementation.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
rte_eth_stats_get is to get physical device statistics. Without
return status, caller does not know whether function fails or not
(i.e. invalid port_id, driver has no stats_get callback). Caller
cannot differiente normal 0 stats or error case. This fix adds
a return status to the function.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Since LSR interrupt is disabled by pmd drivers, link status in rte_eth_device is always down.
Bond slave_configure() enables LSR interrupt on devices to get notification if link status
changes. However, the LSC interrupt at device start time is still lost.
In this fix, call link_update to read link status from hardware
register at device start time.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This library provides reordering capability for out of order mbufs based
on a sequence number in the mbuf structure.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Richardson Bruce <bruce.richardson@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
As far as I know, there is no reason why we should have a limit on the length of
parameters that can be given for a device.
Remove this limit by using dynamic allocations.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Prepare for next commit.
Fix some indent issues, refactor error code.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1. Add functions to enable PF/VF interrupt.
2. Add function to process error message passed from interrupt.
2. Add 2 interrupt handling functions, one for PF and one for VF.
2. Enable interrupt after completing initialization of NIC.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
fm10k pmd driver will support both PF and VF device with single
copy of code. The reason is NIC maps registers with same
function in PF and VF to same PCI I/O address. Then, PF/VF drivers
use same address to access registers belonging to it, HW will
translate the request to correct units.
For some functionalities that are unique to PF, driver will check
current driver type and behave correctly.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
1. Add fm10k_recv_scattered_pkts function to receive jumbo frame
and multi-segment packets.
2. Configure correct receive function in rx_init and dev_init.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
1. Configure RSS in fm10k_dev_rx_init function.
2. Add fm10k_rss_hash_update and fm10k_rss_hash_conf_get to get
and inquery RSS configuration.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
1. Add fm10k_recv_pkts and fm10k_xmit_pkts functions.
2. Link app function pointer to actual fm10k recv/xmit
functions.
3. Change Makefile to compile new file fm10k_rxtx.c
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
1. Add function to initialize RX queues.
2. Add function to initialize TX queues.
3. Add fm10k_dev_start, fm10k_dev_stop and fm10k_dev_close
functions.
4. Add function to close mailbox service.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
1. Add 4 functions fm10k_dev_rx_queue_start,
fm10k_dev_rx_queue_stop, fm10k_dev_tx_queue_start,
and fm10k_dev_tx_queue_stop.
2. verify Rx packet buffer alignment is valid.
Hardware requires specific alignment for Rx packet buffers. At
least one of the following two conditions must be satisfied.
1) Address is 512B aligned
2) Address is 8B aligned and buffer does not cross 4K boundary.
Alignment is checked by the driver when the Rx queue is reset. It
is assumed that if an entire descriptor ring can be filled with
buffers containing valid alignment, then all buffers in that mempool
have valid address alignment. It is the responsibility of the user
to ensure all buffers have valid alignment, as it is the user who
creates the mempool.
It is assumed the buffer needs only to store a maximum size Ethernet
frame.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
1. Add init function to scan and initialize fm10k PF device.
2. Add implementation to register fm10k pmd PF driver.
3. Add 3 functions fm10k_dev_configure, fm10k_stats_get and
fm10k_stats_get.
4. Add fm10k.h to define macros and basic data structure.
5. Add fm10k_logs.h to control log message output.
6. Change config/common_bsdapp and config/common_linuxapp, add
macros to control fm10k pmd driver compile for linux and bsd.
7. Add Makefile.
8. Change lib/Makefile to add fm10k driver into compile list.
9. Change mk/rte.app.mk to add fm10k lib into link.
10. Add ABI version of librte_pmd_fm10k
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Add fm10k device ID list into rte_pci_dev_ids.h.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Base driver is developed and maintained by Intel ND team, includes
basic functional service to Intel Ethernet Switch FM10000 Series
of silicons.
Any suggestion on bug fix and improvement within this directory is
welcome, but need this team to change and update.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
This could be useful to have this values for debug purposes.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
When offloading the checksums of ipip tunnels, m->l2_len is set to 0
as there is no tunnel or inner l2 header. Since this is a valid value
remove the test.
By the way, also remove the same test with l3_len because at this
point, it is expected that the software provides proper values in the
mbuf. It should avoid a test in dataplane processing and therefore
slightly increase performance.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Advertise the DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM flag in the PMD
features. It means that the i40e PMD supports the offload of outer IP
checksum when transmitting tunneling packet.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
If the flag is advertised by a PMD, the NIC supports the outer IP
checksum TX offload of tunneling packets, therefore an application can
set the PKT_TX_OUTER_IP_CKSUM flag in mbufs when transmitting on this
port.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Since previous commit, the flag PKT_TX_UDP_TUNNEL_PKT is not used by any PMD,
remove it from mbuf API and from csumonly (testpmd). In csumonly, the
PKT_TX_OUTER_IP_CKSUM flag is already set for vxlan checksum, providing
enough information to the underlying driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
The definition of the flag PKT_TX_UDP_TUNNEL_PKT in rte_mbuf.h was:
TX packet is an UDP tunneled packet. It must be specified when using
outer checksum offload (PKT_TX_OUTER_IP_CKSUM)
This flag was used to tell the NIC that the offload type is UDP
(I40E_TXD_CTX_UDP_TUNNELING flag). In the datasheet, it says it's
required to specify the tunnel type in the register. However, some tests
(see [1]) showed that it also works without this flag.
Moreover, it is not explained how the hardware use this
information. From a network perspective, this information is useless for
calculating the outer IP checksum as it does not depend on the payload.
Having this flag in the API would force the application to specify the
tunnel type for something that looks only useful for this PMD. It will
limit the number of possible tunnel types (we would need a flag for each
tunnel type) and therefore prevent to support outer IP checksum for
proprietary tunnels.
Finally, if a hardware advertises "I support outer IP checksum", it must
be supported for any payload types.
This has been validated by [2], knowing that the ipip test case was fixed
after this test report [3].
[1] http://dpdk.org/ml/archives/dev/2015-January/011380.html
[2] http://dpdk.org/ml/archives/dev/2015-January/011475.html
[3] http://dpdk.org/ml/archives/dev/2015-January/011610.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
From i40e datasheet:
The IP header type and its offload. In case of tunneling, the IIPT
relates to the inner IP header. See also EIPT field for the outer
(External) IP header offload.
00 - non IP packet or packet type is not defined by software
01 - IPv6 packet
10 - IPv4 packet with no IP checksum offload
11 - IPv4 packet with IP checksum offload
Therefore it is not needed to fill the IIPT field if no offload is
requested (we can keep the value to 00). For instance, the linux driver
code does not set it when (skb->ip_summed != CHECKSUM_PARTIAL). We can
do the same in the dpdk driver.
The function i40e_txd_enable_checksum() that fills the offload registers
can only be called for packets requiring an offload.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
The alias PKT_TX_IPV4_CSUM is only used in one place of i40e driver.
Remove it and only keep the legacy flag PKT_TX_IP_CSUM.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
In loopback mode, it's expected force link up even when there's no cable connect.
But in codes, setup_sfp() rewrites the related register.
It causes in the case 'multispeed_fiber', it can't link up without cable connect.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Patrick Lu <patrick.lu@intel.com>
max_vfs will only be created by igb_uio driver, for other
drivers like vfio or pci_uio_generic, max_vfs will miss.
But sriov_numvfs is not driver related, just get the vf numbers
from that field.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
cmdline_token_portlist_ops fell through cracks in the initial symbol
versioning patch, breaking pktgen build.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
To differentiate libraries that break ABI, we add a library version number
suffix to the library, which must be incremented when a given libraries ABI is
broken. This patch enforces that addition, sets the initial abi soname
extension to 1 for each library and creates a symlink to the base SONAME so that
the test applications will link properly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add linker version script files to each DPDK library to put a stake in the
ground from which we can start cleaning up API's
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add initial pass header files to support symbol versioning.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Hash filter control has been implemented for i40e. It includes
getting/setting,
- global hash configurations (hash function type, and symmetric
hash enable per flow type)
- symmetric hash enable per port
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In order to support hash filter configuration, filter type of hash
is added, also the corresponding structures, macros and definitions
are added.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Calculating the default RSS hash keys at run time is not needed
at all, and may have race conditions. The alternative is to use
array of random values which were generated manually as the
default hash keys.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>