Use correct flag for indicating QinQ strip rx offload.
Fixes: dfebfc9882fb ("ethdev: support dynamic configuration of QinQ strip")
Cc: stable@dpdk.org
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Adding support to enable GTPU eth flow type for RSS hash
index calculation.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch add definitions of maximal data length in module EEPROM,
values are compatible with include/uapi/linux/ethtool.h.
These definitions can be used by application to validate data length.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_ah in order to match the Authentication Header
based on RFC 2402.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_igmp in order to match the Internet Group
Management Protocol based on RFC 2236.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_nsh in order to match the network service header
based on RFC 8300.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash function.
To support symmetric hash by rte_flow RSS action, this patch adds
new hash function "Symmetric Toeplitz" which is supported by some hardware.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since driver callbacks return status code now, there is no necessity
to enable or disable all-multicast mode once again if it is already
successfully enabled or disabled.
Configuration restore at startup tries to ensure that configured
all-multicast mode is applied and start will return error if it fails.
Also it avoids theoretical cases when already configured all-multicast
mode is applied once again and fails. In this cases it is unclear
which value should be reported on get (configured or opposite).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_dev_owner_delete() return value from void to int
and return negative errno values in case of error conditions.
Right now there is only one error case for rte_eth_dev_owner_delete() -
invalid owner, but it still makes sense to return error to catch bugs
in the code which uses the function.
Also update the usage of the function in drivers/netvsc
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_macaddr_get() return value from void to int
and return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_link_get() and rte_eth_link_get_nowait() return value
from void to int and return negative errno values in case of error
conditions.
Return value of link_update callback is ignored since the callback
returns not errors but whether link up status has changed or not.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_xstats_reset() return value from void to int and
return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since driver callbacks return status code now, there is no necessity
to enable or disable promiscuous mode once again if it is already
successfully enabled or disabled.
Configuration restore at startup tries to ensure that configured
promiscuous mode is applied and start will return error if it fails.
Also it avoids theoretical cases when already configured promiscuous
mode is applied once again and fails. In this cases it is unclear
which value should be reported on get (configured or opposite).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_dev_info_get() return value from void to int and return
negative errno values in case of error conditions.
Modify rte_eth_dev_info_get() usage across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Security Parameters Index (SPI) should be set with network endian
values.
While 0xffffffff == htonl(0xffffffff), this missing annotation is
caught by sparse when compiling ovs (dpdk-latest branch).
Fixes: d4b684f7197a ("net: add ESP header to generic flow steering")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
There is no RTE_FDIR_DISABLE. The right name is RTE_FDIR_MODE_NONE.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Sort the experimental symbols per release to make it easier/quicker to
check for how long we have them.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
rte_eth_dev_info_get() returns void and caller does know if the function
does its job or not. Changing of the return value to int would be
API/ABI breakage which requires deprecation process and cannot be
backported to stable branches. For now, make sure that device info is
initialized even in the case of invalid port ID.
Fixes: a30268e9a2d0 ("ethdev: reset whole dev info structure before filling")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Use rte_eth_unformat_addr, so that ethdev can be built and work
without the cmdline library. The dependency on cmdline was
an arrangement of convenience anyway.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_gre_key in order to match the optional key field.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Enable missing support for runtime configuration (setting/getting)
of QinQ strip rx offload for a given ethdev.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
In current implementation, an action which requires parameters
must accept them enclosed in a structure.
Some actions require a single, trivial type parameter, but it still
must be enclosed in a structure.
This obligation results in multiple, action-specific structures, each
containing a single trivial type parameter.
This patch introduces a new approach, allowing an action configuration
object of any type, trivial or a structure.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add actions:
- INC_TCP_SEQ - Increase sequence number in the outermost TCP header.
- DEC_TCP_SEQ - Decrease sequence number in the outermost TCP header.
- INC_TCP_ACK - Increase acknowledgment number in the outermost TCP
header.
- DEC_TCP_ACK - Decrease acknowledgment number in the outermost TCP
header.
Original work by Xiaoyu Min.
This patch uses the new approach introduced by [1], using a simple
integer instead of using an action-specific structure for each of
the new actions.
[1] http://patches.dpdk.org/patch/55882/
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
If PCI Ethernet device driver removes it on close
(RTE_ETH_DEV_CLOSE_REMOVE) and later PCI device itself is unplugged,
it should not fail because of Ethernet device is already removed.
Fixes: 23ea57a2a0ce ("ethdev: complete closing of port")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reported-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
TCP flags were moved to the TCP header file from the Ethernet control
header file, and the RTE prefix was added to their names.
Missing TCP ECN flags were added.
The ALL mask did not include TCP ECN flags, so it was renamed to reflect
that it applies to N-tuple filtering only.
Updated other files affected by the renaming accordingly.
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Putting a '__attribute__((deprecated))' in the middle of a function
prototype does not result in the expected result with gcc (while clang
is fine with this syntax).
$ cat deprecated.c
void * __attribute__((deprecated)) incorrect() { return 0; }
__attribute__((deprecated)) void *correct(void) { return 0; }
int main(int argc, char *argv[]) { incorrect(); correct(); return 0; }
$ gcc -o deprecated.o -c deprecated.c
deprecated.c: In function ‘main’:
deprecated.c:3:1: warning: ‘correct’ is deprecated (declared at
deprecated.c:2) [-Wdeprecated-declarations]
int main(int argc, char *argv[]) { incorrect(); correct(); return 0; }
^
Move the tag on a separate line and make it the first thing of function
prototypes.
This is not perfect but we will trust reviewers to catch the other not
so easy to detect patterns.
sed -i \
-e '/^\([^#].*\)\?__rte_experimental */{' \
-e 's//\1/; s/ *$//; i\' \
-e __rte_experimental \
-e '/^$/d}' \
$(git grep -l __rte_experimental -- '*.h')
Special mention for rte_mbuf_data_addr_default():
There is either a bug or a (not yet understood) issue with gcc.
gcc won't drop this inline when unused and rte_mbuf_data_addr_default()
calls rte_mbuf_buf_addr() which itself is experimental.
This results in a build warning when not accepting experimental apis
from sources just including rte_mbuf.h.
For this specific case, we hide the call to rte_mbuf_buf_addr() under
the ALLOW_EXPERIMENTAL_API flag.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
We had some inconsistencies between functions prototypes and actual
definitions.
Let's avoid this by only adding the experimental tag to the prototypes.
Tests with gcc and clang show it is enough.
git grep -l __rte_experimental |grep \.c$ |while read file; do
sed -i -e '/^__rte_experimental$/d' $file;
sed -i -e 's/ *__rte_experimental//' $file;
sed -i -e 's/__rte_experimental *//' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
rte_eth_dev_info structure exposes, nb_seg_max & nb_mtu_seg_max
to provide maximum number of supported segments for a given platform.
Defining UINT16_MAX as default value of above mentioned variables to
expose support of infinite/maximum segments.
Based on above values, application can decide best size for buffers
while creating mbuf pool.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
We currently have no check on the mempool pointer passed to
rte_eth_rx_queue_setup.
Let's avoid a plain crash when dereferencing it.
Suggested-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add rte_eth_read_clock to read the raw clock of a device.
The main use is to get the device clock conversion co-efficients to be
able to translate the raw clock of the timestamp field of the pkt mbuf
to a local synced time value.
This function was missing to allow users to convert the Rx timestamp
field to real time without the complexity of the rte_timesync* facility.
One can derivate the clock frequency by calling twice read_clock and
then keep a common time base.
Signed-off-by: Tom Barbette <barbette@kth.se>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
