VXLAN-GPE enables VXLAN for all protocols. Protocol link:
https://www.ietf.org/id/draft-ietf-nvo3-vxlan-gpe-05.txt
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch introduce new TX offload flags for device that supports
IP or UDP tunneled packet L3/L4 checksum and TSO offload.
It will be used for non-standard tunnels.
The support from the device is for inner and outer checksums on
IPV4/TCP/UDP and TSO for *any packet with the following format*:
<some headers> / [optional IPv4/IPv6] / [optional TCP/UDP] / <some
headers> / [optional inner IPv4/IPv6] / [optional TCP/UDP]
For example the following packets can use this feature:
1. eth / ipv4 / udp / VXLAN / ip / tcp
2. eth / ipv4 / GRE / MPLS / ipv4 / udp
Please note that specific tunnel headers that contain payload length,
sequence id or checksum will not be updated.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_ctrlmbuf structure is not used by any example application
in dpdk. Remove it, as announced on the mailing list.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Append the __rte_experimental tag to api calls appearing in the
EXPERIMENTAL section of their libraries version map
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Introduce a new helper for pktmbuf pool, which will allow
the application to optionally specify the mempool ops name
as well.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
This patch add support for various mempool ops config helper APIs.
1.User defined mempool ops
2.Platform detected HW mempool ops (active).
3.Best selection of mempool ops by looking into user defined,
platform registered and compile time configured.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
At present the userdefined mempool ops name overwrites
the default mempool ops name variable in internal_config.
This patch change the logic to maintain the value of
user defined only in the internal config.
The pktmbuf_create_pool is updated to reflect the same ie.
use user defined. If not present than use the default.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Update rte_mbuf_sanity_check() to check sanity of data_len and pkt_len
fields. For segmented packets it is supposed that head's pkt_len field
should be the sum of all segments data_len values.
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Update types of variables to correspond to nb_segs type change from
uint8_t to uint16_t.
Fixes: 97cb466d65c9 ("mbuf: use 2 bytes for port and nb segments")
Cc: stable@dpdk.org
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mempool_virt2phy() is renamed to rte_mempool_virt2iova().
The new function has one less parameter because it is unused.
The deprecated function is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add security crypto flags and update mbuf fields to support
IPsec crypto offload for transmitted packets, and to indicate
crypto result for received packets.
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
DPDK has support for both sw and hw mempool and
currently user is limited to use ring_mp_mc pool.
In case user want to use other pool handle,
need to update config RTE_MEMPOOL_OPS_DEFAULT, then
build and run with desired pool handle.
Introducing eal option to override default pool handle.
Now user can override the RTE_MEMPOOL_OPS_DEFAULT by passing
pool handle to eal `--mbuf-pool-ops-name=""`.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In order to support more than 256 virtual ports, the field "port"
in rte_mbuf has been increased to 16 bits. The initialization/reset
value of the field "port" should be changed from 0xff to 0xffff
accordingly.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Some PMDs need to know the tunnel type in order to handle advance TX
features. This patch adds a new TX offload flag for MPLS-in-UDP packets.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is no need for initializing the complete
packet buffer with zero as the packet data area will be
overwritten by the NIC Rx HW anyway.
The testpmd configures the packet mempool
with around 180k buffers with
2176B size. In existing scheme, the init routine
needs to memset around ~370MB vs the proposed scheme
requires only around ~22MB on 128B cache aligned system.
Useful in running DPDK in HW simulators/emulators,
where millions of cycles have an impact on boot time.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Set the value of m->refcnt to 1, m->nb_segs to 1 and m->next
to NULL when the mbuf is stored inside the mempool (unused).
This is done in rte_pktmbuf_prefree_seg(), before freeing or
recycling a mbuf.
Before this patch, the value of m->refcnt was expected to be 0
while in pool.
The objectives are:
- to avoid drivers to set m->next to NULL in the early Rx path, since
this field is in the second 64B of the mbuf and its access could
trigger a cache miss
- rationalize the behavior of raw_alloc/raw_free: one is now the
symmetric of the other, and refcnt is never changed in these functions.
To optimize the freeing of the segments, we try try to only update
m->refcnt, m->next, and m->nb_segs when it's required (idea from
Konstantin Ananyev <konstantin.ananyev@intel.com>).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
When possible, replace the uses of rte_mempool_create() with
the helper provided in librte_mbuf: rte_pktmbuf_pool_create().
This is the preferred way to create a mbuf pool.
This also updates the documentation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add a new Tx flag in mbuf, that can be set by applications to
enable the MACsec offload for a packet to be transmitted.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When receiving coalesced packets in virtio, the original size of the
segments is provided. This is a useful information because it allows to
resegment with the same size.
Add a RX new flag in mbuf, that can be set when packets are coalesced by
a hardware or virtual driver when the m->tso_segsz field is valid and is
set to the segment size of original packets.
This flag is used in next commits in the virtio pmd.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Following discussions in [1] and [2], introduce a new bit to
describe the Rx checksum status in mbuf.
Before this patch, only one flag was available:
PKT_RX_L4_CKSUM_BAD: L4 cksum of RX pkt. is not OK.
And same for L3:
PKT_RX_IP_CKSUM_BAD: IP cksum of RX pkt. is not OK.
This had 2 issues:
- it was not possible to differentiate "checksum good" from
"checksum unknown".
- it was not possible for a virtual driver to say "the checksum
in packet may be wrong, but data integrity is valid".
This patch tries to solve this issue by having 4 states (2 bits)
for the IP and L4 Rx checksums. New values are:
- PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
-> the application should verify the checksum by sw
- PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
-> the application can drop the packet without additional check
- PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
-> the application can accept the packet without verifying the
checksum by sw
- PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
data, but the integrity of the L4 data is verified.
-> the application can process the packet but must not verify the
checksum by sw. It has to take care to recalculate the cksum
if the packet is transmitted (either by sw or using tx offload)
And same for L3 (replace L4 by IP in description above).
This commit tries to be compatible with existing applications that
only check the existing flag (CKSUM_BAD).
[1] http://dpdk.org/ml/archives/dev/2016-May/039920.html
[2] http://dpdk.org/ml/archives/dev/2016-June/040007.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The functions rte_get_rx_ol_flag_name() and rte_get_tx_ol_flag_name()
can dump one flag, or set of flag that are part of the same mask (ex:
PKT_TX_UDP_CKSUM, part of PKT_TX_L4_MASK). But they are not designed to
dump the list of flags contained in mbuf->ol_flags.
This commit introduce new functions to do that. Similarly to the packet
type dump functions, the goal is to factorize the code that could be
used in several applications and reduce the risk of desynchronization
between the flags and the dump functions.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Introduce a new function to read the packet data from an mbuf chain. It
linearizes the data if required, and also ensures that the mbuf is large
enough.
This function is used in next commits that add a software parser to
retrieve the packet type.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
To support tunneling packet offload capabilities on Tx side, PMDs
(e.g., i40e) need to know what kind of tunneling type of this packet.
Instead of analyzing the packet itself, we depend on applications to
correctly set the tunneling type. These flags are defined inside
rte_mbuf.ol_flags.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
On error, the mempool object has to be freed, and rte_errno should be a
positive value.
Fixes: 152ca517900b ("mbuf: use default mempool handler from config")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
In rte_pktmbuf_pool_create(), the rte_errno variable was not always
set on failure.
Fixes: 152ca517900b ("mbuf: use default mempool handler from config")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Following the discussions from:
http://dpdk.org/ml/archives/dev/2015-July/021721.htmlhttp://dpdk.org/ml/archives/dev/2016-April/038143.html
The value of these flags is 0, making them useless. Today, no example
application checks them on Rx, and only few drivers sets them and
silently give wrong packets to the application, which should not happen.
This patch removes the unused flags from rte_mbuf and their use in the
drivers. The i40e and fm10k are kept as they are today and should be
fixed to drop bad packets. The enic driver is managed by its maintainer
in another patch.
Fixes: c22265f6 ("mbuf: add new packet flags for i40e")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Do not add 0x when using %p in format strings to avoid dump messages
with double 0x0x, e.g.,
dump mbuf at 0x0x7fac7b17c800, phys=17b17c880, buf_len=2176
pkt_len=2064, ol_flags=0, nb_segs=1, in_port=255
segment at 0x0x7fac7b17c800, data=0x0x7fac7b17c8f0, data_len=2064
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
By default, the mempool ops used for mbuf allocations is a multi
producer and multi consumer ring. We could imagine a target (maybe some
network processors?) that provides an hardware-assisted pool
mechanism. In this case, the default configuration for this architecture
would contain a different value for RTE_MBUF_DEFAULT_MEMPOOL_OPS.
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
X550 will do VxLAN & NVGRE RX checksum off-load automatically.
This patch exposes the result of the checksum off-load.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
It looks better to have a data buffer address that is aligned to
8 bytes. This is the case when there is no mbuf private area, but
if there is one, the alignment depends on the size of this area
that is located between the mbuf structure and the data buffer.
Indeed, some drivers expects to have the buffer address aligned
to an even address, and moreover an unaligned buffer may impact
the performance when accessing to network headers.
Add a check in rte_pktmbuf_pool_create() to verify the alignment
constraint before creating the mempool. For applications that use
the alternative way (direct call to rte_mempool_create), also
add an assertion in rte_pktmbuf_init().
By the way, also add the MBUF log type.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As unified packet types are used instead, those old bit masks and
the relevant macros for packet type indication need to be removed.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI, which is disabled by default.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a new priv_size field in mbuf structure that should
be initialized at mbuf pool creation. This field contains the
size of the application private data in mbufs.
Introduce new static inline functions rte_mbuf_from_indirect()
and rte_mbuf_to_baddr() to replace the existing macros, which
take the private size in account when attaching and detaching
mbufs.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a new wrapper to rte_mempool_create() to simplify the creation
of a packet mbuf pool.
This wrapper can be used if there is no specific mempool flags, and
no specific mbuf or pool constructor function, which is most of the
use cases.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Allow the user to use the default rte_pktmbuf_init() function even
if the mbuf private size is not 0.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Deduct the mbuf data room size from mempool->elt_size and priv_size,
instead of using an hardcoded value that is not related to the real
buffer size.
To use rte_pktmbuf_pool_init(), the user can either:
- give a NULL parameter to rte_pktmbuf_pool_init(): in this case, the
private size is assumed to be 0, and the room size is
mp->elt_size - sizeof(struct rte_mbuf).
- give the rte_pktmbuf_pool_private filled with appropriate
data_room_size and priv_size values.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch removes all references to RTE_MBUF_REFCNT, setting the refcnt
field in the mbuf struct permanently.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since previous commit, the flag PKT_TX_UDP_TUNNEL_PKT is not used by any PMD,
remove it from mbuf API and from csumonly (testpmd). In csumonly, the
PKT_TX_OUTER_IP_CKSUM flag is already set for vxlan checksum, providing
enough information to the underlying driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Replace PKT_TX_VXLAN_CKSUM with PKT_TX_UDP_TUNNEL_PKT in order to indicate
a packet is an UDP tunneling packet, and introduce 3 TX offload flags for
outer IP TX checksum, which are PKT_TX_OUTER_IP_CKSUM, PKT_TX_OUTER_IPV4
and PKT_TX_OUTER_IPV6 respectively.
Rework csum forward engine and i40e PMD due to these changes.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some of the NICs supported by DPDK have a possibility to accelerate TCP
traffic by using segmentation offload. The application prepares a packet
with valid TCP header with size up to 64K and deleguates the
segmentation to the NIC.
Implement the generic part of TCP segmentation offload in rte_mbuf. It
introduces 2 new fields in rte_mbuf: l4_len (length of L4 header in bytes)
and tso_segsz (MSS of packets).
To delegate the TCP segmentation to the hardware, the user has to:
- set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
PKT_TX_TCP_CKSUM)
- set the flag PKT_TX_IPV4 or PKT_TX_IPV6
- set PKT_TX_IP_CKSUM if it's IPv4, and set the IP checksum to 0 in
the packet
- fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
- calculate the pseudo header checksum without taking ip_len in account,
and set it in the TCP header, for instance by using
rte_ipv4_phdr_cksum(ip_hdr, ol_flags)
The API is inspired from ixgbe hardware (the next commit adds the
support for ixgbe), but it seems generic enough to be used for other
hw/drivers in the future.
This commit also reworks the way l2_len and l3_len are used in igb
and ixgbe drivers as the l2_l3_len is not available anymore in mbuf.
Signed-off-by: Mirek Walukiewicz <miroslaw.walukiewicz@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In test-pmd (rxonly.c), the code is able to dump the list of ol_flags.
The issue is that the list of flags in the application has to be
synchronized with the flags defined in rte_mbuf.h.
This patch introduces 2 new functions rte_get_rx_ol_flag_name()
and rte_get_tx_ol_flag_name() that returns the name of a flag from
its mask. It also fixes rxonly.c to use this new functions and to
display the proper flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
