Added support for if table processing in the ulp mapper
layer. This enables support for the default partition action
record pointer interface table.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Modifications to allow internal encap records to be supported:
- Modified the mapper index table processing to handle encap without an
action record
- Modified the session open code to reserve some 64 Byte internal encap
records on tx
- Modified the blob encap swap to support encap without action record
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Select EEM Host or System memory via config parameter
- Add EEM system memory support for kernel memory
- Dependent on DPDK changes that add support for the HWRM_OEM_CMD.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
- Add support to update global configuration for ACT_TECT
and ACT_ABCR.
- Add support to allow Tunnel and Action global configuration.
- Remove register read and write operations.
- Remove the register read and write support.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Link external action alloc and free to new hcapi interface
- Add parameter range checking
- Fix issues with index allocation check
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Remove table scope data from session. Added to EEM.
- Complete move to RM of table scope base and range.
- Fix some err messaging strings.
- Fix the tcam logging message.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- For the EM Module there is a need to only allocate the EM Records in
HCAPI RM but the storage control is requested to be outside of the RM
DB.
- Add TF_RM_ELEM_CFG_HCAPI_BA.
- Return error when the number of reserved entries for wc tcam is odd
number in tf_tcam_bind.
- Remove em_pool from session
- Use RM provided start offset and size
- HCAPI returns entry index instead of row index for WC TCAM.
- Move resource type conversion to hrwm set/free tcam functions.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Move bulk table get implementation to new Tbl Module design.
- Update messages for bulk table get
- Retrieve specified table element using bulk mechanism
- Remove deprecated resource definitions
- Update device type configuration for P4.
- Update RM DB HCAPI count check and fix EM internal and host
code such that EM DBs can be created correctly.
- Update error logging to be info on unbind in the different modules.
- Move RTE RSVD out of tf_resources.h
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Support for table scope within the EM module
- Support for host and system memory
- Update TCAM set/free.
- Replace TF device type by HCAPI RM type.
- Update TCAM set and free for HCAPI RM type
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Allow TCAM indexes to be allocated from top or bottom.
If the priority is set to 0, allocate from the
lowest tcam indexes i.e. from top. Any other value,
allocate it from the highest tcam indexes i.e. from
bottom.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add residual checker to the TF Host RM as well as new RM APIs. On
close it will scan the DB and check of any remaining elements. If
found they will be logged and FW msg sent for FW to scrub that
specific type of resources.
- Update the module bind to be aware of the module type, for each of
the modules.
- Add additional type 2 string util functions.
- Fix the device naming to be in compliance with TF.
- Update the device unbind order as to assure TCAMs gets flushed
first.
- Update the close functionality such that the session gets
closed after the device is unbound.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add Identifier L2 CTXT Remap to the P4 device and updated the
cfa_resource_types.h to get the type support.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Implement the Identifier, Table Type and the Resource Manager
modules.
Integrate Resource Manager with HCAPI.
Update open/close session.
Move to direct msgs for qcaps and resv messages.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Move External Exact and Exact Match to device module using HCAPI
to add and delete entries
- Make EM active through the device interface.
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Allow TCAM indexes to be allocated from top or bottom.
If the priority is set to 0, allocate from the
lowest tcam indexes i.e. from top. Any other value,
allocate it from the highest tcam indexes i.e. from
bottom.
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Implement the modules RM, Device (WH+), Identifier.
- Update Session module.
- Implement new HWRMs for RM direct messaging.
- Add new parameter check macro's and clean up the header includes for
i.e. tfp such that bnxt.h is not directly included in the new modules.
- Add cfa_resource_types, required for RM design.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add new bulk table type get using FW
to DMA the data back to host.
- Add flag to allow records to be cleared if possible
- Set mirror using tf_alloc_tbl_entry
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Introduce new modules for Device, Resource Manager, Identifier,
Table Types, and TCAM for multi device support.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Modify Exact Match insert and delete to use the HWRM messages directly.
Remove tunneled EM insert and delete message types.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add Exact Match support
- Create EM table pool of memory indices
- Insert exact match internal entry API
- Sends EM internal insert and delete request to firmware
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Apart from func_svif, func_id & vnic, port_db now stores and
retrieves func_spif, func_parif, phy_port_id, port_svif, port_spif,
port_parif, port_vport. New helper functions have been added to
support the same.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Issue HWRM_PORT_PHY_QCAPS to the firmware to get the physical
port count of the device.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
add helper functions to get port & function related information
like parif, physical port id & vport id.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support to query parent PF information (MAC address,
function ID, port ID and default VNIC) from firmware.
Current firmware returns zero for parent default vnic,
a temporary Wh+-specific workaround is included until
that can be fixed.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use 'first_vf_id' and the 'vf_id' that is input as part of adding
a representor to obtain the PCI function ID(FID) of the VF(VFR endpoint).
Use the FID as an input to FUNC_QCFG HWRM cmd to obtain the default
vnic ID of the VF.
Along with getting the default vNIC ID by supplying the FW FID of
the VF-rep endpoint to HWRM_FUNC_QCFG, obtain and store it's
function svif.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added code to support Tx/Rx from a VF representor port.
The VF-reps use the RX/TX rings of the Trusted VF/PF.
For each VF-rep, the Trusted VF/PF driver issues a VFR_ALLOC FW cmd that
returns "cfa_code" and "cfa_action" values.
The FW sets up the filter tables in such a way that VF traffic by
default (in absence of other rules) gets punted to the parent function
i.e. either the Trusted VF or the PF.
The cfa_code value in the RX-compl informs the driver of the source VF.
For traffic being transmitted from the VF-rep, the TX BD is tagged with
a cfa_action value that informs the HW to punt it to the corresponding
VF.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Defines data structures and code to init/uninit
VF representors during pci_probe and pci_remove
respectively.
Most of the dev_ops for the VF representor are just
stubs for now and will be will be filled out in next patch.
To create a representor using testpmd:
testpmd -c 0xff -wB:D.F,representor=1 -- -i
testpmd -c 0xff -w05:02.0,representor=[1] -- -i
To create a representor using ovs-dpdk:
1. First add the trusted VF port to a bridge
ovs-vsctl add-port ovsbr0 vf_rep1 -- set Interface vf_rep1 type=dpdk
options:dpdk-devargs=0000:06:02.0
2. Add the representor port to the bridge
ovs-vsctl add-port ovsbr0 vf_rep1 -- set Interface vf_rep1 type=dpdk
options:dpdk-devargs=0000:06:02.0,representor=1
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The ulp template database is updated to support the new
combined opcodes.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The fields in the device params structure are renamed to reflect
the usage of those fields.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The ulp mapper changes to support mark actions for non
GFID entries that support only LFID rules.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for the vfr flag to the mark manager.
The vf representor flag is added to class table so it can be set in
the template details.
Also added the vfr flag process in mark database.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support of internal exact match flows and the action
mark is supported for these flows.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Unify the opcodes of the different enums into a single enum for reuse of
common processors. Also the ADD_PAD opcode is now SET_TO_ZERO.
This change better reflects the intent of the opcode and allows it to be
used in more circumstances without overloading the term pad.
The fields that were setting a constant zero have now been switched to
use the new SET_TO_ZERO opcode as an optimization. The SET_TO_ZERO does
not copy data into the key/result/mask fields, but rather simply
increments the write pointer.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The ulp template db file is broken into three parts namely the
table, class and action files.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The implicit update of the egress vnic action bitset for a flow
that does not specify the forwarding port explicitly is removed.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
ipv6 vtc_flow contains three fields
1. Version
2. Priority / Traffic Class
3. Flow Label
Currently, these are not parsed separately and also not set separately
in the field bitmap by the flow parser. However, the template treats
them separately. As a result, the flow matching doesn't succeed because
the bitmaps of parser and the template doesn't match.
This patch fixes this problem by parsing the above mentioned fields
individually to align with the template.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added flow db api to get the vf representor action
record for a given flow.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Two templates are added to ulp template db, an ingress rule
for vxlan decap and an egress rule for vxlan encap.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
User could set max flow count by passing a devarg
"-w 0000:0d:00.0,max_num_kflows=64" to a DPDK application;
The value must be not less than 32K and be power-of-2;
the default value is 32K.
Signed-off-by: Shuanglin Wang <shuanglin.wang@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- rename regfile_wr_idx to regfile_idx
The regfile index shall be used for both write and read operations.
Hence the field is renamed.
- remove the unused enum BNXT_ULP_REGFILE_INDEX_CACHE_ENTRY_PTR
- rename the enums in the bnxt_ulp_resource_sub_type
The enums in the bnxt_ulp_resource_sub_type are renamed to reflect
the table types explicitly.
- rename an enum in the regfile index
The BNXT_ULP_REGFILE_INDEX_ACTION_PTR_MAIN is renamed to
BNXT_ULP_REGFILE_INDEX_MAIN_ACTION_PTR since it is the main
action pointer.
- remove cache_tbl_id enums
The bnxt_ulp_cache_tbl_id enums are not required any longer
since the index is now calculated using resource sub type
and direction.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The critical resource field in the template table is assigned
enumeration values instead of hard coded values.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The phy port action handler should get vport details and not
vnic id. The fix is to calculate the vport of the given
port.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
