In current driver print log function, some print format
symbols does not match with the actual variable types.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Some header files have included by others. Also,
some header files have a header file self-contained
error will trigger building warning. As a result,
it is unnecessary and move it into the correct
location.
Beside, here also remove some unused lines.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Because of hardware limitation based on the old version of hns3 network
engine, there are some restrictions:
a) HNS3 PMD driver needs select different processing mode for VLAN based
on whether PVID is set which means our driver need sense the PVID
states.
b) For packets transmitting process, only two layer of VLAN tag is
supported. If the total number of VLAN tags in mbuf and VLAN offload
by hardware (VLAN insert by descriptor) exceeds two, the VLAN in mbuf
will be overwritten by VLAN in the descriptor.
c) If port based VLAN is set, only one VLAN header is allowed in mbuf or
it will be discard by hardware.
In order to solve these restriction, two change is implemented on the
new versions of network engine.
1) add a new VLAN tagged insertion mode, named tag shift mode;
2) add a new VLAN strip control bit, named strip hide enable;
The tag shift mode means that VLAN tag will shift automatically when the
inserted place has a tag. For PMD driver, the VLAN tag1 and tag2
configurations in Tx side do not need to be considered because the
hardware completes it. However, the related configuration will still be
retained to be compatible with the old version of network engine.
The VLAN strip hide means that hardware will strip the VLAN tag and hide
VLAN in descriptor (VLAN ID exposed as zero and related STRIP_TAGP is
off).
These changes make it no longer necessary for the hns3 PMD driver to be
aware of the PVID status and have the ability to send mult-layer (more
than two) VLANs packets. Therefore, hns3 PMD driver introduces the
concept of VLAN mode and adds a new VLAN mode named HNS3_PVID_MODE to
indicate that PVID-related IO process can be implemented by the
hardware. And VF driver does not need to be modified because the related
mailbox messages will not be sent by PF kernel mode netdev driver under
new network engine and all the related hardware configuration is on the
PF side.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds support setting VF PVID by hns3 PF kernel ethdev driver
on the host by "ip link set <eth num> vf <vf id> vlan <vlan tag>"
command.
Because of the hardware constraints, the striped VLAN tag will always in
Rx descriptors which should has been dropped when PVID is enabled and
the PVID will overwrite the outer VLAN tag in Tx descriptor. So, hns3
PMD driver need to change the processing of VLAN tags in the process of
Tx and Rx according to whether PVID is enabled.
1) If the hns3 PF kernel ethdev driver sets the PVID for VF device
before the initialization of the related VF device, hns3 VF PMD
driver should get the PVID state from PF driver through mailbox and
update the related state in txq and rxq maintained by hns3 VF driver
to change the process of Tx and Rx.
2) If the hns3 PF kernel ethdev driver sets the PVID for VF device after
initialization of the related VF device, the PF driver will notify VF
driver to update the PVID state. The VF driver will update the PVID
configuration state immediately to ensure that the VLAN process in Tx
and Rx is correct. But in the window period of this state transition,
packets loss or packets with wrong VLAN may occur.
3) Due to hardware limitations, we only support two-layer VLAN hardware
offload in Tx direction based on hns3 network engine, so when PVID is
enabled, QinQ insert is no longer supported. And when PVID is
enabled, in the following two cases:
i) packets with more than two VLAN tags.
ii) packets with one VLAN tag while the hardware VLAN insert is
enabled.
The packets will be regarded as abnormal packets and discarded by
hardware in Tx direction. For debugging purposes, a validation check
for these types of packets is added to the '.tx_pkt_prepare' ops
implementation function named hns3_prep_pkts to inform users that
these packets will be discarded.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
The mailbox opcode is defined as one byte in datasheet which is not
compatible with that in the current hns3 PMD driver.
This patch fixes the data type of the local variable for mailbox opcode
in driver, changing from uint16_t to uint8_t.
Fixes: 463e748964 ("net/hns3: support mailbox")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Currently, we only support VF device is bound to vfio_pci or igb_uio and
then driven by DPDK driver when PF is driven by kernel mode hns3 ethdev
driver, VF is not supported when PF is driven by hns3 DPDK driver.
This patch adds promiscuous and allmulticast mode support for hns3 VF
PMD driver.
1) The promiscuous/allmulticast mode can be configured successfully only
based on the trusted VF device. If based on the non trusted VF
device, configuring promiscuous/allmulticast mode will fail. The hns3
VF device can be configured as trusted device by hns3 PF kernel
ethdev driver on the host by "ip link set <eth num> vf <vf id> turst
on" command.
2) After the promiscuous mode is configured successfully, hns3 VF PMD
driver can receive the ingress and outgoing traffic. In the words,
all the ingress packets, all the packets sent from the PF and other
VFs on the same physical port.
3) Note: Because of the hardware constraints, By default vlan filter is
enabled and couldn't be turned off based on VF device, so vlan filter
is still effective even in promiscuous mode. If upper applications
don't call rte_eth_dev_vlan_filter API function to set vlan based on
VF device, hns3 VF PMD driver will can't receive the packets with
vlan tag in promiscuous mode.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The format of the ring vector related mailbox commands between driver
and firmware is different from those of other mailbox commands in hns3
network engine.
This patch fixes the error mailbox command format about the vector of
the rings, the related command opcode as below:
HNS3_MBX_MAP_RING_TO_VECTOR
HNS3_MBX_UNMAP_RING_TO_VECTOR
HNS3_MBX_GET_RING_VECTOR_MAP
Fixes: 463e748964 ("net/hns3: support mailbox")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, firmware adds the function of sending message to PF driver
through mailbox when the link status is changed, hns3 PMD driver can
usually recognize link state change faster through the message.
And in some extreme cases, this way is not faster than existing method
regularly updating link status by issuing the command every second in PF
driver, because of the parallel processing of mailbox and command
messages in firmware. So we reserve updating link status using timers in
PF driver, and add querying link status by issuing command to the
firmware in '.link_update' ops implementation function named
hns3_dev_link_update to solve the out of date link status.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Remove the macro 'HNS3_REG_MSG_DATA_OFFSET' which is used to prevent
access violation for response array by limiting the response data length
to 4.
But the limit value is too short to get some longer information such as
6 byte MAC address.
This patch modifies the length of response data from mailbox to allow
the response data length to be 8. So that the VF driver could get more
data from PF driver by mailbox.
Fixes: 463e748964 ("net/hns3: support mailbox")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@hisilicon.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds reset related process for hns3 PMD driver.
The following three scenarios will trigger the reset process,
and the driver settings will be restored after the reset is
successful:
1. Receive a reset interrupt
2. PF receives a hardware error interrupt
3. VF is notified by PF to reset
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds abnormal interrupt process for hns3 PMD driver,
the interrupt reported by NIC hardware.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for mailbox of hns3 PMD driver, mailbox is
used for communication between PF and VF driver.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
