After the read() the jason_data null termination is missing
for the case "indent < 0", for "indent > 0" and "indent == 0"
cases null termination is already handled.
So add the missing case "indent < 0" to the existing "indent == 0"
case to fix null termination.
Coverity issue: 337680
Fixes: a63504a90f ("examples/power: add JSON string handling")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
A for loop to MAX_VFS had a break as the last line, so the w++
would never get called, breaking out of the loop after the
first iteration. Remove the break so that the loop can execute
properly.
Coverity issue: 337682
Fixes: ace158c4a8 ("examples/vm_power: add check for port count")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
A previous change removed the limit of 64 cores by
moving away from 64-bit masks to char arrays. However
this left a buffer overrun issue, where the max channels
was defined as 64, and max cores was defined as 256. These
should all be consistently set to RTE_MAX_LCORE.
The #defines being removed are CHANNEL_CMDS_MAX_CPUS,
CHANNEL_CMDS_MAX_CHANNELS, POWER_MGR_MAX_CPUS, and
CHANNEL_CMDS_MAX_VM_CHANNELS, and are being replaced
with RTE_MAX_LCORE for consistency and simplicity.
Coverity issue: 337672, 337673, 337678
Fixes: fd73630e95 ("examples/power: change 64-bit masks to arrays")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch will ensure the correct max frequency of a core is set in
the lcore_power_info struct when disabling turbo, while using the
intel pstate driver.
Fixes: e6c6dc0f96 ("power: add p-state driver compatibility")
Cc: stable@dpdk.org
Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Acked-by: Liang Ma <liang.j.ma@intel.com>
Test all existing power environment configuration to verify if related
data is properly initialized and clean in set/unset scenarios.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Set all power environment related function pointers to NULL
when unset is being made.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
On attempt to set_env in already initialized state notify
user by returning error that operation cannot be performed.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Due to lack of thread safety in exisiting solution
use spinlock mechanism for atomic
modification of power environment related data.
Fixes: 445c6528b5 ("power: common interface for guest and host")
Cc: stable@dpdk.org
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Removed dependency to mac_list from policies:
* BRANCH_RATIO,
* WORKLOAD,
* TIME
in function update_policy.
Fixes: 1b89799147 ("power: update error handling")
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Tested-by: Yufeng Mo <yufengx.mo@intel.com>
Add option --multi, to enhance pdump application to allow capture
on unique cores for each --pdump option. If option --multi is ignored
the default capture occurs on single core for all --pdump options.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
PDUMP application is being limited to run on default first core.
The patch removes the restriction, allowing user to run on any of
selected cores in EAL args. If no args are passed, logic runs on
default master core.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
sprintf function is not secure as it doesn't check the length of string.
More secure function snprintf and strlcpy is used.
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
This commit adds an autotest which exercises new timer reset/stop APIs
in a secondary process. Timers are created, and sometimes stopped, in
the secondary process, and their expiration is checked for and handled
in the primary process.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
For APIs which can return an error value, do sanity checking of the input
parameters for NULL and return a suitable error value for those cases.
NOTE: The drain function is currently omitting NULL checks too, but this
function has no way to flag an error value, so checking in that case would
simply mask problems.
Reported-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Compilation was failing when using a big endian toolchain:
rte_mbuf.h:504:2: error: expected ',' or '}' before 'RTE_MBUF_L3_LEN_OFS'
Fixes: 8d9c2c3a1f ("mbuf: add function to generate raw Tx offload value")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
If secondary process attempt to mmap the resource resulted in
the wrong address, then it would leave behind the bad mmap.
Coverity issue: 337675, 337664
Fixes: 2a28a502c6 ("bus/vmbus: map ring in secondary process")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
The IP addresses should be formatted using standard routines
rather than outputing in raw hex.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The l3fwd example should use the IPv4 addresses defined in RFC5735 and
the IPv6 addresses defined in RFC5180 for the L3 forwarding example
Longest Prefix Match table.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch changes what testpmd uses as IP addresses when
run in transmit only mode. The old code was using
192.168.0.1 -> 192.168.0.2
but these addresses are reserved for private Internet by RFC 1918.
The new code uses 192.18.0.1 and 192.18.0.2 which are on the
subnet reserved for performance testing by RFC 2544.
New command line option allows the user to pick any other src/dst
address desired.
Notice: this changes the default IP address for transmit only.
It may cause some user who has hardcoded network addresses to report
a regression.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Promote the adapter functions and rte_event_port_unlinks_in_progress()
as stable as it's been added for a while now and multiple drivers and
test application like test-eventdev has been tested using the adapter APIs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The function rte_eal_cleanup() was introduced more than one year ago,
in DPDK 18.02. It is no longer experimental, allowing
pdump, proc-info and hotplug_mp apps to not need any experimental API.
The function rte_ctrl_thread_create() was introduced one year ago
in DPDK 18.05. It is no longer experimental, allowing
KNI PMD and TEP example to not need any experimental API.
The functions rte_socket_count() and rte_socket_id_by_idx() were
introduced one year ago in DPDK 18.05. They are no longer experimental.
The function rte_dev_is_probed() was introduced half a year ago
in DPDK 18.11. It is no longer experimental.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
A successful call to rte_mp_request_sync does not guarantee that there
are any messages in the buffer, and this should be checked for before
accessing data in the message. Buffer can be empty if IPC is disabled or
if we decide to ignore replies.
Fixes: c9aa56edec ("net/tap: access primary process queues from secondary")
Cc: stable@dpdk.org
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This driver defines lots of functions (like init_rss) which are intended
to only be used in this device. But when doing static linking these
global functions cause link failures when similar function name is
used in application.
This patch prefixes all functions defined in cxgbe.h with cxgbe_
to avoid these kind of conflicts.
Fixes: bfcb257d30 ("net/cxgbe: enable RSS for VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
This patch introduces:
- VMxnet3 v4 negotiation and,
- entirely guest-driven UDP RSS support.
VMxnet3 v3 already has UDP RSS support, however it
depends on hypervisor provisioning on the VM through
ESX specific flags, which are not transparent or known
to the guest later on.
Vmxnet3 v4 introduces a new API transaction which allows
configuring RSS entirely from the guest. This API must be
invoked after device shared mem region is initialized.
IPv4 ESP RSS (SPI based) is also available, but currently
there are no ESP RSS definitions on rte_eth layer to
handle that.
Signed-off-by: Eduard Serra <eserra@vmware.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Add validation to pointer constructed from the IPv4 header length
in order to prevent malformed packets from generating a potential
out of bounds memory read.
Fixes: 09150784a7 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
This commit adds support for drop action when creating E-Switch flow
using DV.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Actions like encap/decap, modify header require setting the flow table
type. Until now we supported only Nic RX and Nic TX, this commits adds
the support for FDB table type for those actions.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
In current implementation the DV steering supported only NIC steering.
This commit adds the transfer attribute in order to create a matcher
on the FDB tables.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This commit checks the for DR E-Switch support.
The support is based on both Device and Kernel.
This commit also enables the user to manually disable this this feature.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The meson build was missing the define for Direct Rules.
Fixes: 4f84a19779 ("net/mlx5: add Direct Rules API")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Modify the translate vport function to match other translate items
naming conventions.
Fixes: 0fe3f18f78 ("net/mlx5: add source vport match to the ingress rules")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
According to RTE flow the action order should be the order that the
actions were given.
In the case of modify actions the position of the action was always
last.
This commit solves this issue by saving the position of the first modify
action, and then adds to this position the pointer to the modify action.
Fixes: 4bb14c83df ("net/mlx5: support modify header using Direct Verbs")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Currently the allocation of the jump to QP is done in flow apply,
this results in memory leak.
This patch fixes this issue by moving the allocation and release of the
jump to QP action to the responsibility of the hrxq.
Fixes: cbb66daa3c ("net/mlx5: prepare Direct Verbs for Direct Rule")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
On BlueField platform we have the new entity - PF representor.
This one represents the PCI PF attached to external host on the
side of ARM. The traffic sent by the external host to the NIC
via PF will be seem by ARM on this PF representor.
This patch refactors port recognizing capability on the base of
physical port name. We have two groups of name formats. Legacy
name formats are supported by kernels before ver 5.0 (being
more precise - before the patch [1]) or before Mellanox OFED 4.6,
and new naming formats added by the patch [1].
Legacy naming formats are supported:
- missing physical port name (no sysfs/netlink key) at all,
master is assumed
- decimal digits (for example "12"), representor is assumed,
the value is the index of attached VF
New naming formats are supported:
- "p" followed by decimal digits, for example "p2", master
is assumed
- "pf" followed by PF index concatenated with "vf" followed by
VF index, for example "pf0vf1", representor is assumed.
If index of VF is "-1" it is a special case of host PF
representor, this representor must be indexed in devargs
as 65535, for example representor=[0-3,65535] will
allow representors for VF0, VF1, VF2, VF3 and for host PF.
Note: do not specify representor=[0-65535], it causes devargs
processing error, because number of ports (rte_eth_dev) is
limited.
Applications should distinguish representors and master devices
exclusively by device flag RTE_ETH_DEV_REPRESENTOR and do not
rely on switch port_id (mlx5 PMD deduces ones from representor_id)
values returned by dev_infos_get() API.
[1] https://www.spinics.net/lists/netdev/msg547007.html
Linux-tree: c12ecc23 (Or Gerlitz 2018-04-25 17:32 +0300)
"net/mlx5e: Move to use common phys port names for vport representors"
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
mlx4 driver has a global list of Memory Regions created by
device, and there is a ml4_mr_release() routine which makes
a memory cleanup at device closing. The head of device MR list
was fetched outside the rwlock protected section. Also some
noticed typos are fixed.
Fixes: 9797bfcce1 ("net/mlx4: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
mlx5 driver has a global list of Memory Regions created by
device, and there is a ml5_mr_release() routine which makes
a memory cleanup at device closing. The head of device MR list
was fetched outside the rwlock protected section. Also some
noticed typos are fixed.
Fixes: 974f1e7ef1 ("net/mlx5: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
When passed to the application, Rx packets retain the port ID value
originally set by slave devices. Unfortunately these IDs have no
meaning to applications, which are typically unaware of their existence.
This confuses those caring about the source port field in mbufs
(m->port) which experience issues ranging from traffic drop to crashes.
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The function rte_eth_dev_count_total() was introduced one year ago
in the release 18.05. It can be declared non experimental in 19.05.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Some port iterations are manually checking against RTE_ETH_DEV_UNUSED
instead of using the iterators based on rte_eth_find_next().
A new macro RTE_ETH_FOREACH_VALID_DEV() is introduced, but kept private
because there should be no need of iterating over all devices in the
API. The public iterators have additional filters for ownership, parent
device or sibling ports.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".
After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.
The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Version is synced with internal Aquantia's driver versioning
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
