Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
On BlueField platform we have the new entity - PF representor.
This one represents the PCI PF attached to external host on the
side of ARM. The traffic sent by the external host to the NIC
via PF will be seem by ARM on this PF representor.
This patch refactors port recognizing capability on the base of
physical port name. We have two groups of name formats. Legacy
name formats are supported by kernels before ver 5.0 (being
more precise - before the patch [1]) or before Mellanox OFED 4.6,
and new naming formats added by the patch [1].
Legacy naming formats are supported:
- missing physical port name (no sysfs/netlink key) at all,
master is assumed
- decimal digits (for example "12"), representor is assumed,
the value is the index of attached VF
New naming formats are supported:
- "p" followed by decimal digits, for example "p2", master
is assumed
- "pf" followed by PF index concatenated with "vf" followed by
VF index, for example "pf0vf1", representor is assumed.
If index of VF is "-1" it is a special case of host PF
representor, this representor must be indexed in devargs
as 65535, for example representor=[0-3,65535] will
allow representors for VF0, VF1, VF2, VF3 and for host PF.
Note: do not specify representor=[0-65535], it causes devargs
processing error, because number of ports (rte_eth_dev) is
limited.
Applications should distinguish representors and master devices
exclusively by device flag RTE_ETH_DEV_REPRESENTOR and do not
rely on switch port_id (mlx5 PMD deduces ones from representor_id)
values returned by dev_infos_get() API.
[1] https://www.spinics.net/lists/netdev/msg547007.html
Linux-tree: c12ecc23 (Or Gerlitz 2018-04-25 17:32 +0300)
"net/mlx5e: Move to use common phys port names for vport representors"
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There is the routine mlx5_nl_portnum() added to get
the number of ports of multiport Infiniband device.
It is assumed the Uplink/VF representors are attached
on these ports.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There is the routine mlx5_nl_ifindex() returning the
network interface index associated with Infiniband device.
We are going to support multiport IB devices, now function
takes the IB port as argument and returns ifindex associated
with tuple <IB device, IB port>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The master device and VF representors were distinguished by
presence of port name, master device did not have one. The new Linux
kernels starting from 5.0 provide the port name for master device
and the implemented representor recognizing method does not work.
The new recognizing method is based on querying the VF number,
has been created on the base of the device.
The IFLA_NUM_VF attribute is returned by kernel if IFLA_EXT_MASK
attribute is specified in the Netlink request message.
Also the presence check of device symlink in device sysfs folder
is added to distinguish representors with sysfs based method.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Kernel update [1] introduce new format of representors names.
This patch implements RFC [2], updating MLX5 PMD to support the new
format, while maintaining support of the existing format.
[1] https://github.com/torvalds/linux/commit/c12ecc2
[2] http://mails.dpdk.org/archives/dev/2019-March/125676.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The private structure stored in rte_eth_dev->data->dev_private
was named "struct priv".
In order to ease code browsing, the structure is renamed
"struct mlx[45]_priv".
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Network interface indices being unsigned, an invalid index or error is
normally expressed through a zero value (see if_nametoindex()).
mlx5_ifindex() has a signed return type for negative values in case of
error. Since mlx5_nl.c does not check for errors, these may be fed back as
invalid interfaces indices to subsequent system calls. This usage would
have been correct if mlx5_ifindex() returned a zero value instead.
This patch makes mlx5_ifindex() unsigned for convenience.
Fixes: ccdcba53a3f4 ("net/mlx5: use Netlink to add/remove MAC addresses")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Route Netlink message socket is wrongly initialized by registering to
the route link group. This causes the socket to receive all link
message related to routes whereas the PMD do not expect to receive such
information. In some situation it ends by filling the socket at a point
that any new message cannot be exchanged.
As the PMD is not expected to process such broadcast messages, the
parameter in the nl_group in the function is also remove.
Fixes: ccdcba53a3f4 ("net/mlx5: use Netlink to add/remove MAC addresses")
Cc: stable@dpdk.org
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The current PCI probing method is not aware of Verbs port representors,
which appear as standard Verbs devices bound to the same PCI address and
cannot be distinguished.
Problem is that more often than not, the wrong Verbs device is used,
resulting in unexpected traffic.
This patch makes the driver discard representors to only use the master
device. If unable to identify it (e.g. kernel drivers not recent enough),
either:
- There is only one matching device which isn't identified as a
representor, in that case use it.
- Otherwise log an error and do not probe the device.
(Patch based on prior work from Yuanhan Liu)
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
VF devices are not able to receive promisc or allmulti traffic unless it
fully requests it though Netlink. This will cause the request to be
processed by the PF which will handle the request and enable it.
This requires the VF to be trusted by the PF.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
VF devices are not able to receive traffic unless it fully requests it
though Netlink. This will cause the request to be processed by the PF
which will add/remove the MAC address to the VF table if the VF is trusted.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
